1972 Fargo W110 Pickup Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1972 Fargo W110 Pickup — BCA NBRP6408.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 1972 Fargo W110 Pickup come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

This group includes BCA NS40769S, NATIONAL 8835S and WJB / INMOTION PARTS WS40769S.

This table covers the bearings and races that support the differential carrier. Read more

14 Differential Carrier Bearing / Race parts for the 1972 Fargo W110 Pickup come from 4 brands — WJB / INMOTION PARTS, BCA, ACDELCO and 1 other brand. The "Popular" part is WJB / INMOTION PARTS WTLM104949. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

The Economy section lists 6 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTLM104949 is listed in this group.

In the Standard Replacement grade, BCA, ACDELCO and NATIONAL supply 8 parts: built to original-equipment specification. A representative part number is ACDELCO ACLM104949.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Differential Cover Gasket parts for the 1972 Fargo W110 Pickup come from 2 brands — FEL-PRO and VICTOR REINZ. The "Popular" part is FEL-PRO RDS6629. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Part numbers include FEL-PRO RDS6629, FEL-PRO RDS55073 and FEL-PRO RDS6583, among others listed above.

This table covers the bearings and races on the differential pinion. Read more

20 Differential Pinion Bearing / Race parts are listed for the 1972 Fargo W110 Pickup, from BCA, WJB / INMOTION PARTS and NATIONAL. WJB / INMOTION PARTS WTM88048 carries the "Popular" badge. All of them fit every engine offered in the 1972 W110 Pickup.

Economy: 8 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTM88048.

The Standard Replacement section: 12 options from BCA and NATIONAL. BCA NBM88010 is listed in this group.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

4 Differential Pinion Repair Sleeve parts for the 1972 Fargo W110 Pickup come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Part numbers include SCHAEFFLER SR3506, SCHAEFFLER SR3481 and WJB / INMOTION PARTS WS99155, among others listed above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Differential Pinion Seal parts for the 1972 Fargo W110 Pickup come from 4 brands — WJB / INMOTION PARTS, BCA, SCHAEFFLER and 1 other brand. The "Popular" part is NATIONAL 5126. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Listed part numbers: NATIONAL 5126, WJB / INMOTION PARTS WS5778 and BCA NS5126, plus the other parts above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

3 Differential Rebuild Kit parts are listed for the 1972 Fargo W110 Pickup, from WJB / INMOTION PARTS and NATIONAL. All of them fit every engine offered in the 1972 W110 Pickup.

Part numbers include NATIONAL RA304, WJB / INMOTION PARTS WKRA304 and WJB / INMOTION PARTS WKRA28.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

One part is listed for the 1972 Fargo W110 Pickup — BCA NS88187.

This table covers the Transfer Case Idler Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Idler Shaft Bearing parts for the 1972 Fargo W110 Pickup come from 3 brands — WJB / INMOTION PARTS, NATIONAL and BCA. The "Popular" part is WJB / INMOTION PARTS WT2720. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

The Economy section: 2 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT2720 is listed in this group.

Standard Replacement: 1 part, from NATIONAL. A representative part number is NATIONAL 2720.

3 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: WJB / INMOTION PARTS WT2720, WJB / INMOTION PARTS WT2793 and NATIONAL 2720, plus the other parts above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: WJB / INMOTION PARTS RBBL307NR.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts are listed for the 1972 Fargo W110 Pickup, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. All of them fit every engine offered in the 1972 W110 Pickup.

Listed part numbers: NATIONAL 99212, SCHAEFFLER SR3514 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts are listed for the 1972 Fargo W110 Pickup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. All of them fit every engine offered in the 1972 W110 Pickup.

Listed part numbers: BCA NS473468, NATIONAL 473468 and SCHAEFFLER SS3109, plus the other parts above.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1972 Fargo W110 Pickup — WJB / INMOTION PARTS WRQ15902.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Output Shaft Bearing parts are listed for the 1972 Fargo W110 Pickup, from BCA and NATIONAL. All of them fit every engine offered in the 1972 W110 Pickup.

Listed part numbers: BCA NB307L and NATIONAL 307L.

This table covers the Transfer Case Output Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Output Shaft Pilot Bearing parts are listed for the 1972 Fargo W110 Pickup, from WJB / INMOTION PARTS and BCA. All of them fit every engine offered in the 1972 W110 Pickup.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WRB3216.

The Standard Replacement section: 1 option from BCA. BCA NBB3216 is listed in this group.

This group includes WJB / INMOTION PARTS WRB3216 and BCA NBB3216.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

2 Transfer Case Output Shaft Repair Sleeve parts for the 1972 Fargo W110 Pickup come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Listed part numbers: SCHAEFFLER SR3514 and WJB / INMOTION PARTS WS99212.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Output Shaft Seal parts for the 1972 Fargo W110 Pickup come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand. Every part fits all 3 engine options (3.7L 225cid L6, 5.2L 318cid V8 and 6.6L 400cid V8).

Part numbers include BCA NS473468, NATIONAL 473468 and SCHAEFFLER SS3109, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Shift Shaft seal surface. Read more

4 Transfer Case Shift Shaft Repair Sleeve parts are listed for the 1972 Fargo W110 Pickup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS99076, NATIONAL 99076 and SCHAEFFLER SR3453, plus the other parts above.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Shift Shaft Seal parts are listed for the 1972 Fargo W110 Pickup, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS2287, NATIONAL 2287 and SCHAEFFLER SS2158, plus the other parts above.