This page lists 8 engine parts for the 1965 Ferrari 275 GTB, across 1 part type, covering the 3.3L V12 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1965 Ferrari 275 GTB, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Every listed part is an Oil Filter.
Every part on this page is matched to the 3.3L V12 — the only engine offered in the 1965 Ferrari 275 GTB.
The most listed brands for 1965 Ferrari 275 GTB engine parts are FRAM (3 parts), WIX (2 parts) and VARIOUS MFR (1 part), plus 2 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
2 parts on this 1965 Ferrari 275 GTB page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FRAM PH8A (Oil Filter) and WIX 51515 (Oil Filter). Click any part number to see every vehicle that part fits.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM | FE8A | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| VARIOUS MFR | PG1A | 🇺🇸 US | Spin-On | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM | TG8A | 🇺🇸 US | Tough GuardUse if Spin-On Kit was Installed | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM Popular | PH8A | 🇺🇸 US | Extra GuardUse if Spin-On Kit was Installed | View on Amazon |
| WIX Popular | 51515 | 🇺🇸 US 🇨🇦 CA | Bypass Relief Valve Setting: 8-11 PSIHeight: 5.197 In | View on Amazon |
| BOSCH | 72174 | 🇺🇸 US 🇨🇦 CA | Full flow filter. | View on Amazon |
| HASTINGS / BALDWIN | LF140 | 🇺🇸 US | View on Amazon | |
| WIX | 51050 | 🇺🇸 US 🇨🇦 CA | Height: 5.178 InMedia Material: Enhanced Cellulose | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
8 Oil Filter parts are listed for the 1965 Ferrari 275 GTB, from FRAM, WIX, VARIOUS MFR and 2 other brands. FRAM PH8A carries the "Popular" badge.
In the Economy grade, FRAM and VARIOUS MFR supply 2 parts: the catalog's value-priced group. A representative part number is FRAM FE8A.
In the High Performance / Heavy Duty grade, FRAM supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is FRAM TG8A.
The Standard Replacement section lists 5 options from WIX, FRAM, BOSCH and 1 other brand — built to original-equipment specification. FRAM PH8A is listed in this group.
This group includes FRAM PH8A, FRAM FE8A and VARIOUS MFR PG1A and the remaining parts above.
Buying Engine Parts for a 1965 Ferrari 275 GTB
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 3.3L V12 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter .
Frequently Asked Questions
How many engine parts fit the 1965 Ferrari 275 GTB?
Our catalog currently lists 8 engine parts for the 1965 Ferrari 275 GTB across 1 subcategory and 5 brands, covering the 3.3L V12 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1965 Ferrari 275 GTB?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1965 Ferrari 275 GTB was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1965 Ferrari 275 GTB?
Every part on this page is matched to the 3.3L V12 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1965 Ferrari 275 GTB
Engine Parts for Other Ferrari 275 GTB Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.