1978 Ferrari 308 GTS Drivetrain Parts

Engine:
3.0L V8

13 Drivetrain parts are listed for the 1978 Ferrari 308 GTS, in 3 part types, covering the 3.0L V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

The drivetrain system on the 1978 Ferrari 308 GTS moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. All 13 listed parts are Differential Pinion Bearing / Race (7 parts), Differential Carrier Bearing / Race (5 parts) and Differential Pinion Seal (1 part).

Differential Carrier Bearing / Race

Brand Part Number Markets Notes Buy
SKF Popular 362AVP
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SKF 362AVP
Race
Rear
View on
Amazon
SCHAEFFLER 362A
🇺🇸 US 🇨🇦 CA
Race Only
Fitment notes — SCHAEFFLER 362A
Race Only
Rear16.513 mm Width88.9 mm Inside Diameter
View on
Amazon
SCHAEFFLER K368A
🇺🇸 US 🇨🇦 CA
Rear22.230 mm Width
Fitment notes — SCHAEFFLER K368A
Rear22.230 mm Width50.80 mm Inside Diameter
View on
Amazon
SKF 368A
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
SKF 368AVP
🇺🇸 US 🇨🇦 CA
with 2.0000 In. Bearing Inside Diameter
Fitment notes — SKF 368AVP
with 2.0000 In. Bearing Inside Diameter
Rear0.8750" Cone Length3.5560 Cup Length
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Differential Pinion Bearing / Race

Economy

Brand Part Number Markets Notes Buy
FAMOUS BRAND Popular SM802048
🇺🇸 US 🇨🇦 CA
RearINNER
Fitment notes — FAMOUS BRAND SM802048
RearINNERFERRARI308 GTB
View on
Amazon
FAMOUS BRAND SM802011
🇺🇸 US 🇨🇦 CA
RearINNER
Fitment notes — FAMOUS BRAND SM802011
RearINNERFERRARI308 GTB
View on
Amazon
ULTRA-POWER WTM802048
🇺🇸 US 🇨🇦 CA
RearInner
Fitment notes — ULTRA-POWER WTM802048
RearInner308 GTBwith Ferrari Axle
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
SKF Popular M802048011
🇺🇸 US 🇨🇦 CA
Tapered Roller Bearing Set (Bearing and Race)
Fitment notes — SKF M802048011
Tapered Roller Bearing Set (Bearing and Race)
Rear Inner
View on
Amazon
SKF M802011
🇺🇸 US 🇨🇦 CA
Rear Inner
View on
Amazon
SKF M802011VP
🇺🇸 US 🇨🇦 CA
RaceTapered
Fitment notes — SKF M802011VP
RaceTapered
Rear Inner
View on
Amazon
SKF BR28300
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SKF BR28300
Race
Rear Outer
View on
Amazon

This table covers the bearings and races on the differential pinion.

Differential Pinion Seal

Brand Part Number Markets Notes Buy
SCHAEFFLER SS4360
🇺🇸 US 🇨🇦 CA
Rear2.68" O.D. X 0.31" Width
View on
Amazon

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Drivetrain Parts for a 1978 Ferrari 308 GTS

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Confirm you have the 3.0L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Differential Pinion Bearing / Race and Differential Carrier Bearing / Race .

Frequently Asked Questions

How many drivetrain parts fit the 1978 Ferrari 308 GTS?

Our catalog currently lists 13 drivetrain parts for the 1978 Ferrari 308 GTS across 3 subcategories and 4 brands, covering the 3.0L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of drivetrain problems on a 1978 Ferrari 308 GTS?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1978 Ferrari 308 GTS was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1978 Ferrari 308 GTS?

Every part on this page is matched to the 3.0L V8 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1978 Ferrari 308 GTS

Drivetrain Parts for Other Ferrari 308 GTS Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.