9 Ignition parts are listed for the 1989 Ferrari 348, in 2 part types, covering the 3.4L V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 1989 Ferrari 348 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 9 listed parts are Spark Plug (5 parts) and Ignition Coil (4 parts).
The 1989 Ferrari 348 came with a single engine, the 3.4L V8, and every part is verified against it.
7 brands supply ignition parts for the 1989 Ferrari 348, led by NGK (2 parts), DENSO (2 parts) and FAMOUS BRAND (1 part), plus 4 more brands. Quality grades include Copper / Nickel, Economy and Iridium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1989 Ferrari 348. 1 part has it: NGK 7162 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FAMOUS BRAND | EBC1704 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER | 5C1259 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | UF614 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS | 5C1259 | 🇺🇸 US 🇨🇦 CA | Requires External Resistor: YES | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
4 Ignition Coil parts for the 1989 Ferrari 348 come from 4 brands — FAMOUS BRAND, ULTRA-POWER, STANDARD MOTOR PRODUCTS and 1 other brand.
The Economy section lists 2 options from FAMOUS BRAND and ULTRA-POWER — the catalog's value-priced group. FAMOUS BRAND EBC1704 is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS and WELLS supply 2 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS UF614.
Part numbers include FAMOUS BRAND EBC1704, ULTRA-POWER 5C1259 and STANDARD MOTOR PRODUCTS UF614, among others listed above.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.027", 0.028" and 0.032". Replacement brands in this table include NGK, DENSO and CHAMPION.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 7162 | 🇺🇸 US 🇨🇦 CA | StandardPre-Set Gap: 0.028" | View on Amazon |
| CHAMPION | 905 | 🇺🇸 US 🇨🇦 CA | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| DENSO | 4116 | 🇺🇸 US 🇨🇦 CA | U-Groove ConventionalPre-Set Gap: 0.027" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DENSO | 5373 | 🇺🇸 US 🇨🇦 CA | Iridium PowerPre-Set Gap: 0.032" | View on Amazon |
| NGK | 6681 | 🇺🇸 US 🇨🇦 CA | Iridium IXPre-Set Gap: 0.032" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
5 Spark Plug parts are listed for the 1989 Ferrari 348, from NGK, DENSO and CHAMPION. NGK 7162 carries the "Popular" badge.
In the Copper / Nickel grade, NGK, CHAMPION and DENSO supply 3 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is NGK 7162.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 2 options from DENSO and NGK — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. DENSO 5373 is listed in this group.
This group includes NGK 7162, CHAMPION 905 and DENSO 4116 and the remaining parts above.
Buying Ignition Parts for a 1989 Ferrari 348
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 3.4L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1989 Ferrari 348?
Our catalog currently lists 9 ignition parts for the 1989 Ferrari 348 across 2 subcategories and 7 brands, covering the 3.4L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1989 Ferrari 348?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1989 Ferrari 348?
Notes on this page include pre-set gaps of 0.025", 0.027", 0.028" and 0.032". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1989 Ferrari 348 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1989 Ferrari 348?
Every part on this page is matched to the 3.4L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1989 Ferrari 348
Ignition Parts for Other Ferrari 348 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.