1990 Ferrari Testarossa Electrical Connector Parts

Engine:
4.9L H12

The 1990 Ferrari Testarossa has 14 electrical connector parts with verified fitment on this page — 6 part types and 5 brands, covering the 4.9L H12 engine. Each part includes a manufacturer part number and application notes.

On the 1990 Ferrari Testarossa, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules. Most of the listed parts are Temperature Sender / Sensor Connector (6 parts), Throttle Position Sensor (TPS) Connector (4 parts) and Cold Start Valve Connector (1 part). The other 3 part types cover the remaining 3 parts.

Cold Start Valve Connector

Brand Part Number Markets Notes Buy
WELLS 1P1347
🇺🇸 US 🇨🇦 CA
Wire Gauge Measurement: 18
Fitment notes — WELLS 1P1347
Wire Gauge Measurement: 18
with 2 Terminals
View on
Amazon

This table covers the harness connectors at the Cold Start Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Cold Start Valve Temperature Switch Connector

Brand Part Number Markets Notes Buy
WELLS 1P1347
🇺🇸 US 🇨🇦 CA
Wire Gauge Measurement: 18
Fitment notes — WELLS 1P1347
Wire Gauge Measurement: 18
with 2 Terminals
View on
Amazon

This table covers the harness connectors at the Cold Start Valve Temperature Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Distributor Pickup Coil Connector

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS CON201
🇺🇸 US 🇨🇦 CA
with Quick Release Clip
View on
Amazon

This table covers the harness connectors at the Distributor Pickup Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Oil Temperature Switch Connector

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS CON201
🇺🇸 US 🇨🇦 CA
with Quick Release Clip
View on
Amazon

This table covers the harness connectors at the Oil Temperature Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Temperature Sender / Sensor Connector

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular HP3860
🇺🇸 US 🇨🇦 CA
HandypackTerminal Type: Blade
Fitment notes — STANDARD MOTOR PRODUCTS HP3860
HandypackTerminal Type: BladeBlack
Square Bodywith 2 Terminal(s)
View on
Amazon
WELLS Popular 1P1347
🇺🇸 US 🇨🇦 CA
Wire Gauge Measurement: 18
Fitment notes — WELLS 1P1347
Wire Gauge Measurement: 18
with 2 Terminals
View on
Amazon
ACDELCO PT2164
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO PT2164
Gold
with 2 Terminal (S)Square Body
View on
Amazon
FOUR SEASONS 70005
🇺🇸 US 🇨🇦 CA
2 Terminal FemaleFull Skirt
View on
Amazon
FOUR SEASONS 70017
🇺🇸 US 🇨🇦 CA
2 Terminal FemaleHalf Skirt
View on
Amazon
STANDARD MOTOR PRODUCTS S697
🇺🇸 US 🇨🇦 CA
Connector Shape: RectangleHarness Length
Fitment notes — STANDARD MOTOR PRODUCTS S697
Connector Shape: RectangleHarness Lengthinches: 8.5Number of Splice Connectors Included: 0Terminal Type: BladeWiring Harness Length (mm): 215.9Black
Square Bodywith 2 Terminal(s)
View on
Amazon

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Throttle Position Sensor (TPS) Connector

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS HP3975
🇺🇸 US 🇨🇦 CA
Handy PackBlack
View on
Amazon
STANDARD MOTOR PRODUCTS S745
🇺🇸 US 🇨🇦 CA
Connector Shape: Rectangleblack
View on
Amazon
UNITED MOTOR PRODUCTS CON149
🇺🇸 US 🇨🇦 CA
View on
Amazon
WELLS 1P1421
🇺🇸 US 🇨🇦 CA
Wiring Harness Length: 9.43 In
Fitment notes — WELLS 1P1421
Wiring Harness Length: 9.43 In
with 3 Terminals
View on
Amazon

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Buying Electrical Connector Parts for a 1990 Ferrari Testarossa

On this vehicle, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules.

  • Confirm you have the 4.9L H12 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Temperature Sender / Sensor Connector and Throttle Position Sensor (TPS) Connector .

Frequently Asked Questions

How many electrical connector parts fit the 1990 Ferrari Testarossa?

Our catalog currently lists 14 electrical connector parts for the 1990 Ferrari Testarossa across 6 subcategories and 5 brands, covering the 4.9L H12 engine. Each part is matched to the engine(s) it fits.

What are the signs of electrical connector problems on a 1990 Ferrari Testarossa?

Common symptoms include intermittent faults that move when the harness is wiggled, green corrosion inside a plug, or melted connector housings near heat sources. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1990 Ferrari Testarossa was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1990 Ferrari Testarossa?

Every part on this page is matched to the 4.9L H12 engine. Then match the connector by terminal count and keyway, not just appearance — many families look identical but will not lock. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1990 Ferrari Testarossa

Electrical Connector Parts for Other Ferrari Testarossa Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.