1996 Ferrari F355 Spider Ignition Parts

Engine:
3.5L V8

This page lists 12 ignition parts for the 1996 Ferrari F355 Spider, across 3 part types, covering the 3.5L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 1996 Ferrari F355 Spider, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 12 listed parts are Ignition Coil (6 parts), Crankshaft Position Sensor (3 parts) and Spark Plug (3 parts).

Crankshaft Position Sensor

Full Service Kit

Brand Part Number Markets Notes Buy
WALKER PRODUCTS 23592055
🇺🇸 US 🇨🇦 CA
Full Service Kit
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BOSCH 0261210126
🇺🇸 US 🇨🇦 CA
Engine Crankshaft Position Sensor
View on
Amazon
WALKER PRODUCTS 2352055
🇺🇸 US 🇨🇦 CA
Sensor Only
View on
Amazon

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FAMOUS BRAND EBC1704
🇺🇸 US 🇨🇦 CA
Fits F355 Berlinettaor F355 GTSF355 Spider
View on
Amazon
ULTRA-POWER 5C1259
🇺🇸 US 🇨🇦 CA
Fits F355 Berlinettaor F355 GTSF355 Spideror F355 GTS or F355 Spider
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
ASTEMO / HITACHI Popular IGC8793
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BOSCH Popular 0221503407
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS UF614
🇺🇸 US 🇨🇦 CA
View on
Amazon
WELLS 5C1259
🇺🇸 US 🇨🇦 CA
Requires External Resistor: YES
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Copper / Nickel

Brand Part Number Markets Notes Buy
CHAMPION 977
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 977
Copper PlusPre-Set Gap: 0.03"
OE-Recommended Gap: 0.035"
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK 4259
🇺🇸 US 🇨🇦 CA
Laser PlatinumPre-Set Gap: 0.028"
Fitment notes — NGK 4259
Laser PlatinumPre-Set Gap: 0.028"
OE-Recommended Gap: 0.035 IN
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
DENSO 5361
🇺🇸 US 🇨🇦 CA
Iridium PowerPre-Set Gap: 0.035"
Fitment notes — DENSO 5361
Iridium PowerPre-Set Gap: 0.035"
Gap .035
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1996 Ferrari F355 Spider

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 3.5L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Crankshaft Position Sensor .

Frequently Asked Questions

How many ignition parts fit the 1996 Ferrari F355 Spider?

Our catalog currently lists 12 ignition parts for the 1996 Ferrari F355 Spider across 3 subcategories and 10 brands, covering the 3.5L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1996 Ferrari F355 Spider?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1996 Ferrari F355 Spider?

Notes on this page include pre-set gaps of 0.028", 0.03" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1996 Ferrari F355 Spider was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1996 Ferrari F355 Spider?

Every part on this page is matched to the 3.5L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1996 Ferrari F355 Spider

Ignition Parts for Other Ferrari F355 Spider Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.