The 2001 Ferrari 360 has 6 ignition parts with verified fitment on this page — 2 part types and 4 brands, covering the 3.6L V8 engine. Each part includes a manufacturer part number and application notes.
On the 2001 Ferrari 360, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 6 listed parts are Spark Plug (5 parts) and Ignition Coil (1 part).
The 2001 Ferrari 360 came with a single engine, the 3.6L V8, and every part is verified against it.
4 brands supply ignition parts for the 2001 Ferrari 360, led by CHAMPION (3 parts), BOSCH (1 part) and NGK (1 part), plus 1 more brand. Quality grades include Copper / Nickel, Double Platinum and Iridium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2001 Ferrari 360. 1 part has it: NGK 6378 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH | 0221504015 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
This group shows a single part: BOSCH 0221504015.
Spark Plug
Summary: Notes include pre-set gaps of 0.028", 0.029", 0.03" and 0.035". Replacement brands in this table include CHAMPION, NGK and DENSO.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION | 309E | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Copper PlusPre-Set Gap: 0.029" | View on Amazon |
| CHAMPION | 654 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RacingPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION | 309 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Copper Plus | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 6378 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Laser PlatinumPre-Set Gap: 0.028" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DENSO | 5362 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Iridium PowerPre-Set Gap: 0.035" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
5 Spark Plug parts are listed for the 2001 Ferrari 360, from CHAMPION, NGK and DENSO. NGK 6378 carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION supplies 3 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 309E.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, NGK supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 6378.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 1 option from DENSO — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. DENSO 5362 is listed in this group.
This group includes NGK 6378, CHAMPION 309E and CHAMPION 654 and the remaining parts above.
Buying Ignition Parts for a 2001 Ferrari 360
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 3.6L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2001 Ferrari 360?
Our catalog currently lists 6 ignition parts for the 2001 Ferrari 360 across 2 subcategories and 4 brands, covering the 3.6L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2001 Ferrari 360?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2001 Ferrari 360?
Notes on this page include pre-set gaps of 0.028", 0.029", 0.03" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2001 Ferrari 360 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2001 Ferrari 360?
Every part on this page is matched to the 3.6L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2001 Ferrari 360
Ignition Parts for Other Ferrari 360 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.