This page lists 5 engine parts for the 2010 Ferrari 599 GTB, across 2 part types, covering the 6.0L V12 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2010 Ferrari 599 GTB, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 5 listed parts are Oil (4 parts) and Oil Filter (1 part).
The 2010 Ferrari 599 GTB came with a single engine, the 6.0L V12, and every part is verified against it.
3 brands supply engine parts for the 2010 Ferrari 599 GTB, led by LIQUI MOLY (3 parts), LUCAS OIL (1 part) and HASTINGS / BALDWIN (1 part).
Each part number listed for the 2010 Ferrari 599 GTB opens a page with every vehicle that part fits.
Oil
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL | 10248 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC EUROPEAN MOTOR OIL SAE 10W-601 qt | View on Amazon |
Racing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY | 2068 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthoil Race Tech GT1 10W-601 Liter | View on Amazon |
| LIQUI MOLY | 2024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthoil Race Tech GT1 10W-605 Liter | View on Amazon |
| LIQUI MOLY | 20127 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthoil Race Tech GT1 10W-6020 Liter | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
4 Oil parts for the 2010 Ferrari 599 GTB come from 2 brands — LIQUI MOLY and LUCAS OIL.
The Full Synthetic section lists 1 option from LUCAS OIL — full-synthetic oils. LUCAS OIL 10248 is listed in this group.
The Racing section lists 3 options from LIQUI MOLY — grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. LIQUI MOLY 2068 is listed in this group.
Part numbers include LUCAS OIL 10248, LIQUI MOLY 2068 and LIQUI MOLY 2024, among others listed above.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS / BALDWIN | LF410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
This group shows a single part: HASTINGS / BALDWIN LF410.
Buying Engine Parts for a 2010 Ferrari 599 GTB
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 6.0L V12 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2010 Ferrari 599 GTB?
Our catalog currently lists 5 engine parts for the 2010 Ferrari 599 GTB across 2 subcategories and 3 brands, covering the 6.0L V12 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2010 Ferrari 599 GTB?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2010 Ferrari 599 GTB?
Oil rows on this page include SAE 10W-60. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2010 Ferrari 599 GTB was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2010 Ferrari 599 GTB?
Every part on this page is matched to the 6.0L V12 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2010 Ferrari 599 GTB
Engine Parts for Other Ferrari 599 GTB Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.