This page lists 20 wheel parts for the 2012 Ferrari FF, across 3 part types, covering the 6.3L V12 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2012 Ferrari FF, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 20 listed parts are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (14 parts), Tire Pressure Monitoring System (TPMS) Sensor (4 parts) and Valve Stem Cap (2 parts).
Every part on this page is matched to the 6.3L V12 — the only engine offered in the 2012 Ferrari FF.
The most listed brands for 2012 Ferrari FF wheel parts are BH SENS (8 parts), DENSO (6 parts) and SCHRADER (4 parts), plus 2 more brands. Quality grades include Valve Stem Assembly and Hardware Only.
3 parts on this 2012 Ferrari FF page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including BH SENS RDV021 (Tire Pressure Monitoring System (TPMS) Stem / Service Kit) and BH SENS RDV022 (Tire Pressure Monitoring System (TPMS) Stem / Service Kit). Click any part number to see every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS | RDE048V21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
| DENSO | 5501911 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE ManufacturedProgrammed | View on Amazon |
| SCHRADER | 29138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ProgrammedIncludes Mounting Hardware | View on Amazon |
| STANDARD MOTOR PRODUCTS | TPM385 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Programmed | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
4 Tire Pressure Monitoring System (TPMS) Sensor parts for the 2012 Ferrari FF come from 4 brands — BH SENS, DENSO, SCHRADER and 1 other brand.
Part numbers include BH SENS RDE048V21, DENSO 5501911 and SCHRADER 29138, among others listed above.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20023 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Clamp-In componentsPack of 50 | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Popular | RDV021 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flexible Angle MetalSilver 43mm | View on Amazon |
| BH SENS Popular | RDV022 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flexible Angle MetalSilver 48mm | View on Amazon |
| BH SENS Popular | RDV026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flexible Angle MetalBlack 43mm | View on Amazon |
| BH SENS | RDV023 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flexible Angle MetalSilver 49mm | View on Amazon |
| BH SENS | RDV027 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flexible Angle MetalTitanium 43mm | View on Amazon |
| BH SENS | RDV024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flexible Angle MetalSilver 51mm | View on Amazon |
| BH SENS | RDV025 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flexible Angle MetalSilver 56mm | View on Amazon |
| DENSO | 9990651 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Manufactured | View on Amazon |
| DENSO | 9990648 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Manufactured | View on Amazon |
| DENSO | 9990649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Manufactured | View on Amazon |
| DENSO | 9990656 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Manufactured | View on Amazon |
| DENSO | 9990643 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Manufactured | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ALLIGATOR | 591305 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitOE Valves with Torx Screw | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
14 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts are listed for the 2012 Ferrari FF, from BH SENS, DENSO, SCHRADER and 1 other brand. BH SENS RDV021 carries the "Popular" badge.
In the Hardware Only grade, SCHRADER supplies 1 part: grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. A representative part number is SCHRADER 20023.
The Valve Stem Assembly section lists 12 options from BH SENS and DENSO — grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. BH SENS RDV021 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Valve Stem Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20395 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Green Cap indicates nitrogen filled tiresSnap-In | View on Amazon |
| SCHRADER | 20795 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Green Cap indicates nitrogen filled tiresSnap-In | View on Amazon |
This table covers the protective dust caps for TPMS and standard valve stems. Typical signs include a missing cap, a slow TPMS leak, or grit packed in the stem. Use the cap type the notes call for — some TPMS stems need a specific seal under the cap.
2 Valve Stem Cap parts for the 2012 Ferrari FF come from SCHRADER.
Part numbers include SCHRADER 20395 and SCHRADER 20795.
Buying Wheel Parts for a 2012 Ferrari FF
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 6.3L V12 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Tire Pressure Monitoring System (TPMS) Sensor .
Frequently Asked Questions
How many wheel parts fit the 2012 Ferrari FF?
Our catalog currently lists 20 wheel parts for the 2012 Ferrari FF across 3 subcategories and 5 brands, covering the 6.3L V12 engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2012 Ferrari FF?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Ferrari FF was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 Ferrari FF?
Every part on this page is matched to the 6.3L V12 engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 Ferrari FF
Wheel Parts for Other Ferrari FF Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.