This page lists 8 ignition parts for the 1956 Fiat 500, across 2 part types, covering the 570cc L4 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1956 Fiat 500, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 8 listed parts are Spark Plug (4 parts) and Spark Plug Wire (4 parts).
Every part on this page is matched to the 570cc L4 — the only engine offered in the 1956 Fiat 500.
The most listed brands for 1956 Fiat 500 ignition parts are CHAMPION (2 parts), STANDARD MOTOR PRODUCTS (2 parts) and UNITED MOTOR PRODUCTS (2 parts), plus 2 more brands. Quality grades include Standard Replacement and Premium.
Each part number listed for the 1956 Fiat 500 opens a page with every vehicle that part fits.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | R44F | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| AUTOLITE | 275 | 🇺🇸 US | Copper Non-ResistorPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 811 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION | 9311 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.04" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
4 Spark Plug parts for the 1956 Fiat 500 come from 3 brands — CHAMPION, ACDELCO and AUTOLITE.
Part numbers include ACDELCO R44F, AUTOLITE 275 and CHAMPION 811, among others listed above.
Spark Plug Wire
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 3400 | 🇺🇸 US | SetCore Material: Suppression Core | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 23400 | 🇺🇸 US | Pro SeriesSet | View on Amazon |
| UNITED MOTOR PRODUCTS | 641 | 🇺🇸 US | Permashield-DelcoreSet | View on Amazon |
| UNITED MOTOR PRODUCTS | 640 | 🇺🇸 US | Set | View on Amazon |
This table covers the Spark Plug wires.
4 Spark Plug Wire parts are listed for the 1956 Fiat 500, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.
The Premium section lists 1 option from STANDARD MOTOR PRODUCTS — a step above OE specification in materials, tolerances or warranty terms. STANDARD MOTOR PRODUCTS 3400 is listed in this group.
The Standard Replacement section lists 3 options from UNITED MOTOR PRODUCTS and STANDARD MOTOR PRODUCTS — built to original-equipment specification. STANDARD MOTOR PRODUCTS 23400 is listed in this group.
Listed part numbers: STANDARD MOTOR PRODUCTS 3400, STANDARD MOTOR PRODUCTS 23400 and UNITED MOTOR PRODUCTS 641, plus the other parts above.
Buying Ignition Parts for a 1956 Fiat 500
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 570cc L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Spark Plug Wire .
Frequently Asked Questions
How many ignition parts fit the 1956 Fiat 500?
Our catalog currently lists 8 ignition parts for the 1956 Fiat 500 across 2 subcategories and 5 brands, covering the 570cc L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1956 Fiat 500?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1956 Fiat 500?
Notes on this page include pre-set gaps of 0.025", 0.030", 0.032" and 0.04". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1956 Fiat 500 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1956 Fiat 500?
Every part on this page is matched to the 570cc L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1956 Fiat 500
Ignition Parts for Other Fiat 500 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.