7 Engine parts are listed for the 1966 Fiat 1100, in 2 part types, covering both the 1.1L L4 and the 1.2L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1966 Fiat 1100, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 7 listed parts are Oil Filter (5 parts) and Cylinder Repair Sleeve (2 parts).
The 1966 Fiat 1100 was sold with both the 1.1L L4 and the 1.2L L4. 2 parts fit every engine; the other 5 are engine-specific. Each part shows which engine(s) it fits.
5 brands supply engine parts for the 1966 Fiat 1100, led by MELLING (2 parts), WIX (2 parts) and ACDELCO (1 part), plus 2 more brands.
Each part number listed for the 1966 Fiat 1100 opens a page with every vehicle that part fits.
Cylinder Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 1.1L L4 | CSL722 | 🇺🇸 US | 1/8 IN Wall Thickness | View on Amazon |
| MELLING Fits: 1.1L L4 | CSL622 | 🇺🇸 US | 3/32 IN Wall Thickness | View on Amazon |
This table covers the wear sleeves used to restore a Cylinder seal surface.
MELLING supplies both parts for the 1966 Fiat 1100.
Part numbers include MELLING CSL722 and MELLING CSL622.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 1.1L L4 | PF53 | 🇺🇸 US 🇨🇦 CA | Gold / Professional or Gold / Professional DurapackSpin-On | View on Amazon |
| BECK/ARNLEY Fits: 1.2L L4 | 0418148 | 🇺🇸 US | View on Amazon | |
| HASTINGS / BALDWIN Fits: 1.1L L4 | LF130 | 🇺🇸 US | Element | View on Amazon |
| WIX Fits: all 1966 1100 engines | 51320 | 🇺🇸 US 🇨🇦 CA | Height: 3.790 InSpin-On Filter | View on Amazon |
| WIX Fits: all 1966 1100 engines | 51010 | 🇺🇸 US 🇨🇦 CA | Cartridge Filter | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
5 Oil Filter parts for the 1966 Fiat 1100 come from 4 brands — WIX, ACDELCO, BECK/ARNLEY and 1 other brand. 2 parts fit every engine; the other 3 are engine-specific.
This group includes ACDELCO PF53, BECK/ARNLEY 0418148 and HASTINGS / BALDWIN LF130 and the remaining parts above.
Buying Engine Parts for a 1966 Fiat 1100
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Cylinder Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 1966 Fiat 1100?
Our catalog currently lists 7 engine parts for the 1966 Fiat 1100 across 2 subcategories and 5 brands, covering both the 1.1L L4 and the 1.2L L4. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1966 Fiat 1100 engines?
Some do. 2 parts fit every engine; the other 5 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1966 Fiat 1100?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1966 Fiat 1100 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1966 Fiat 1100?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1966 Fiat 1100
Engine Parts for Other Fiat 1100 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.