6 Drivetrain parts are listed for the 1968 Fiat 124, in 1 part type, covering both the 1.2L L4 and the 1.4L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1968 Fiat 124, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Every listed part is an Universal Joint.
The 1968 Fiat 124 was sold with both the 1.2L L4 and the 1.4L L4. All 6 parts on this page fit every engine.
The most listed brands for 1968 Fiat 124 drivetrain parts are DANA (2 parts), GMB (2 parts) and MOOG (1 part), plus 1 more brand. Quality grades include Standard Replacement and Economy.
2 parts on this 1968 Fiat 124 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including GMB 2200500 (Universal Joint) and MOOG 341 (Universal Joint). Click any part number to see every vehicle that part fits.
Universal Joint
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 1968 124 engines | 25101X | 🇺🇸 US 🇨🇦 CA | Spicer SelectNon-Greasable | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GMB Popular Fits: all 1968 124 engines | 2200500 | 🇺🇸 US 🇨🇦 CA | GreasableGrease Fitting in Cross | View on Amazon |
| MOOG Popular Fits: all 1968 124 engines | 341 | 🇺🇸 US 🇨🇦 CA | Fits Rear Driveshaft at Rear AxleExcept Short Grease Fitting | View on Amazon |
| DANA Fits: all 1968 124 engines | 5101X | 🇺🇸 US 🇨🇦 CA | SpicerNon-Greasable | View on Amazon |
| GMB Fits: all 1968 124 engines | 2200600 | 🇺🇸 US 🇨🇦 CA | GreasableGrease Fitting in Bearing Cap | View on Amazon |
| SKF Fits: all 1968 124 engines | UJ341 | 🇺🇸 US 🇨🇦 CA | Greaseable | View on Amazon |
This table covers the U-joints in the driveshaft.
6 Universal Joint parts for the 1968 Fiat 124 come from 4 brands — DANA, GMB, MOOG and 1 other brand. The "Popular" part is GMB 2200500. Every part fits both the 1.2L L4 and the 1.4L L4.
The Economy section lists 1 option from DANA — the catalog's value-priced group. DANA 25101X is listed in this group.
In the Standard Replacement grade, GMB, MOOG, DANA and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is GMB 2200500.
Part numbers include GMB 2200500, DANA 25101X and MOOG 341, among others listed above.
Buying Drivetrain Parts for a 1968 Fiat 124
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- You do not need to pick an engine: every drivetrain part on this page fits both the 1.2L L4 and the 1.4L L4.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Universal Joint .
Frequently Asked Questions
How many drivetrain parts fit the 1968 Fiat 124?
Our catalog currently lists 6 drivetrain parts for the 1968 Fiat 124 across 1 subcategory and 4 brands, covering both the 1.2L L4 and the 1.4L L4. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 1968 Fiat 124 engines?
No. On this page every drivetrain part fits both the 1.2L L4 and the 1.4L L4. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of drivetrain problems on a 1968 Fiat 124?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Fiat 124 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Fiat 124?
Every part on this page already fits both the 1.2L L4 and the 1.4L L4. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Fiat 124
Drivetrain Parts for Other Fiat 124 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.