14 Drivetrain parts are listed for the 1970 Fiat 124, in 3 part types, covering both the 1.4L L4 and the 1.6L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1970 Fiat 124, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. All 14 listed parts are Universal Joint (6 parts), CV Joint Boot (4 parts) and Differential Pinion Bearing / Race (4 parts).
The 1970 Fiat 124 was sold with both the 1.4L L4 and the 1.6L L4. 8 parts fit every engine; the other 6 are engine-specific. Each part shows which engine(s) it fits.
8 brands supply drivetrain parts for the 1970 Fiat 124, led by DORMAN (4 parts), TIMKEN (2 parts) and DANA (2 parts), plus 5 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1970 Fiat 124. 2 parts have it, including GMB 2200500 (Universal Joint) and MOOG 341 (Universal Joint). Each part number opens a page with every vehicle that part fits.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 1970 124 engines | 614001 | 🇺🇸 US 🇨🇦 CA | Joint Diameter 3.58"Shaft End Inside Diameter .93" | View on Amazon |
| DORMAN Fits: all 1970 124 engines | 03680 | 🇺🇸 US 🇨🇦 CA | OuterJoint Diameter 3.83" | View on Amazon |
| DORMAN Fits: all 1970 124 engines | 614002 | 🇺🇸 US 🇨🇦 CA | Joint Diameter 3.3"Shaft End Inside Diameter 0.87" | View on Amazon |
| DORMAN Fits: all 1970 124 engines | 614701 | 🇺🇸 US 🇨🇦 CA | OuterQuick-Boot | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
DORMAN supplies the 4 CV Joint Boot parts for the 1970 Fiat 124. All of them fit every engine offered in the 1970 124.
Listed part numbers: DORMAN 614001, DORMAN 03680 and DORMAN 614002, plus the other parts above.
Differential Pinion Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 1970 124 engines | NBHM801346 | 🇺🇸 US 🇨🇦 CA | Rear Inner | View on Amazon |
| SCHAEFFLER Fits: all 1970 124 engines | KHM89443 | 🇺🇸 US 🇨🇦 CA | Rear Outer28.575 mm Width | View on Amazon |
| TIMKEN Fits: all 1970 124 engines | HM89410 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| TIMKEN Fits: all 1970 124 engines | HM89443 | 🇺🇸 US 🇨🇦 CA | Rear Outer | View on Amazon |
This table covers the bearings and races on the differential pinion.
4 Differential Pinion Bearing / Race parts for the 1970 Fiat 124 come from 3 brands — TIMKEN, BCA and SCHAEFFLER. Every part fits both the 1.4L L4 and the 1.6L L4.
Part numbers include BCA NBHM801346, SCHAEFFLER KHM89443 and TIMKEN HM89410, among others listed above.
Universal Joint
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 1.4L L4 | 25101X | 🇺🇸 US 🇨🇦 CA | Spicer SelectNon-Greasable | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GMB Popular Fits: 1.4L L4 | 2200500 | 🇺🇸 US 🇨🇦 CA | GreasableGrease Fitting in Cross | View on Amazon |
| MOOG Popular Fits: 1.4L L4 | 341 | 🇺🇸 US 🇨🇦 CA | Fits Rear Driveshaft at Rear AxleExcept Short Grease Fitting | View on Amazon |
| DANA Fits: 1.4L L4 | 5101X | 🇺🇸 US 🇨🇦 CA | SpicerNon-Greasable | View on Amazon |
| GMB Fits: 1.4L L4 | 2200600 | 🇺🇸 US 🇨🇦 CA | GreasableGrease Fitting in Bearing Cap | View on Amazon |
| SKF Fits: 1.4L L4 | UJ341 | 🇺🇸 US 🇨🇦 CA | Greaseable | View on Amazon |
This table covers the U-joints in the driveshaft.
6 Universal Joint parts are listed for the 1970 Fiat 124, from DANA, GMB, MOOG and 1 other brand. GMB 2200500 carries the "Popular" badge.
In the Economy grade, DANA supplies 1 part: the catalog's value-priced group. A representative part number is DANA 25101X.
The Standard Replacement section lists 5 options from GMB, MOOG, DANA and 1 other brand — built to original-equipment specification. GMB 2200500 is listed in this group.
Part numbers include GMB 2200500, DANA 25101X and MOOG 341, among others listed above.
Buying Drivetrain Parts for a 1970 Fiat 124
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Universal Joint and CV Joint Boot .
Frequently Asked Questions
How many drivetrain parts fit the 1970 Fiat 124?
Our catalog currently lists 14 drivetrain parts for the 1970 Fiat 124 across 3 subcategories and 8 brands, covering both the 1.4L L4 and the 1.6L L4. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 1970 Fiat 124 engines?
Some do. 8 parts fit every engine; the other 6 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 1970 Fiat 124?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1970 Fiat 124 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1970 Fiat 124?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1970 Fiat 124
Drivetrain Parts for Other Fiat 124 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.