1975 Fiat 128 Engine Parts

Engine:
1.3L L4

The 1975 Fiat 128 has 52 engine parts with verified fitment on this page — 17 part types and 16 brands, covering the 1.3L L4 engine. Each part includes a manufacturer part number and application notes.

On the 1975 Fiat 128, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Crankshaft Seal (9 parts), Expansion Plug (9 parts) and Camshaft Seal (7 parts). The other 14 part types cover the remaining 27 parts.

Camshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL 99114
🇺🇸 US 🇨🇦 CA
View on
Amazon
SCHAEFFLER SR3463
🇺🇸 US 🇨🇦 CA
11 MM Width35.56 mm Outside Diameter
View on
Amazon
SKF 99114
🇺🇸 US 🇨🇦 CA
Shaft Diameter: 1.181 In
View on
Amazon
WJB / INMOTION PARTS WS99114
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the wear sleeves used to restore a Camshaft seal surface.

Camshaft Seal

Brand Part Number Markets Notes Buy
BCA Popular NS223035
🇺🇸 US 🇨🇦 CA
View on
Amazon
NATIONAL Popular 223035
🇺🇸 US 🇨🇦 CA
View on
Amazon
AJUSA 15009700
🇺🇸 US 🇨🇦 CA
30 X 52 X 7Clockwise
Fitment notes — AJUSA 15009700
30 X 52 X 7ClockwiseEngine 128A1.000
View on
Amazon
ELRING 212458
🇺🇸 US 🇨🇦 CA
Sedan
View on
Amazon
ITM ENGINE COMPONENTS 1506303
🇺🇸 US 🇨🇦 CA
View on
Amazon
SCHAEFFLER SS2287
🇺🇸 US 🇨🇦 CA
2.05" I:D X 2.05" O.D. X 0.31" Width
View on
Amazon
SKF 11640
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS CR4099AM
🇺🇸 US 🇨🇦 CA
SetBimetal (Aluminum Base)
Fitment notes — KING ENGINE BEARINGS CR4099AM
SetBimetal (Aluminum Base)
3 Oil Holes - 1 At Center and 2 At 15 Degrees From Center
View on
Amazon
MAHLE / CLEVITE CB1332A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Pair
Fitment notes — MAHLE / CLEVITE CB1332A
A Series (Aluminum)Pair
(Size: Standard)
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 54013500
🇺🇸 US 🇨🇦 CA
Engine 128A1.000
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
ITM ENGINE COMPONENTS 5M1442
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
SEALED POWER 4659M
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — SEALED POWER 4659M
Set
(Size: 0.030" Undersize)
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA NS99157
🇺🇸 US 🇨🇦 CA
View on
Amazon
NATIONAL 99157
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
SCHAEFFLER SR3483
🇺🇸 US 🇨🇦 CA
FrontFits Shaft Diameters of 1.572"-1.578"
Fitment notes — SCHAEFFLER SR3483
FrontFits Shaft Diameters of 1.572"-1.578"16 MM Width46.99 mm Outside Diameter
View on
Amazon
WJB / INMOTION PARTS WS99157
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular 224025
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
WJB / INMOTION PARTS Popular WS224025
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
AJUSA 15017500
🇺🇸 US 🇨🇦 CA
FrontClockwise
Fitment notes — AJUSA 15017500
FrontClockwiseEngine 128A1.000
View on
Amazon
AJUSA 15031000
🇺🇸 US 🇨🇦 CA
RearCounter Clockwise
Fitment notes — AJUSA 15031000
RearCounter ClockwiseEngine 128A1.000
View on
Amazon
ELRING 440780
🇺🇸 US 🇨🇦 CA
Material: ACM (Polyacrylate)Radial Shaft Seal Design: AwithBS
Fitment notes — ELRING 440780
Material: ACM (Polyacrylate)Radial Shaft Seal Design: AwithBSSwirl Type: LD
Sedan
View on
Amazon
ELRING 059790
🇺🇸 US 🇨🇦 CA
Material: MVQ (Silicone Elastomer)Swirl Type: RD
Fitment notes — ELRING 059790
Material: MVQ (Silicone Elastomer)Swirl Type: RD
Sedan
View on
Amazon
ELRING 325007
🇺🇸 US 🇨🇦 CA
Material: ACM (Polyacrylate)Radial Shaft Seal Design: B
Fitment notes — ELRING 325007
Material: ACM (Polyacrylate)Radial Shaft Seal Design: BSwirl Type: RD
Sedan
View on
Amazon
ITM ENGINE COMPONENTS 1506304
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
SCHAEFFLER SS2642
🇺🇸 US 🇨🇦 CA
Front2.21" O.D. X 0.28" Width
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA 81007100
🇺🇸 US 🇨🇦 CA
Engine 128A1.000with Cylinder Head # 10035540
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA 10035540
🇺🇸 US 🇨🇦 CA
87 Bore DiameterEngine 128A1.000
Fitment notes — AJUSA 10035540
87 Bore DiameterEngine 128A1.000(1.40) Thickness
View on
Amazon
AJUSA 10063200
🇺🇸 US 🇨🇦 CA
87 Bore DiameterEngine 128A1.000
Fitment notes — AJUSA 10063200
87 Bore DiameterEngine 128A1.000(1.80) Thickness
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 52022600
🇺🇸 US 🇨🇦 CA
Engine 128A1.000with Cylinder Head # 10035540
View on
Amazon
AJUSA 52060100
🇺🇸 US 🇨🇦 CA
Engine 128A1.000with Cylinder Head # 10063200
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Repair Sleeve

Brand Part Number Markets Notes Buy
MELLING CSL804
🇺🇸 US 🇨🇦 CA
3/32 IN Wall Thickness
View on
Amazon
MELLING CSL904
🇺🇸 US 🇨🇦 CA
1/8 IN Wall Thickness
View on
Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Block Heater

Brand Part Number Markets Notes Buy
KAT'S HEATERS 11401
🇺🇸 US 🇨🇦 CA
Freeze Plug Heater
Fitment notes — KAT'S HEATERS 11401
Freeze Plug Heater
Threaded Electrical Plug End40mm400 WattsEasiest Mounting Location: Front RightElement Must Face 6 Oclock Position To Avoid Contact with Engine Wall
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 50031500
🇺🇸 US 🇨🇦 CA
Engine 128A1.000with Cylinder Head # 10035540
View on
Amazon
AJUSA 50068000
🇺🇸 US 🇨🇦 CA
Engine 128A1.000with Cylinder Head # 10063200
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
ITM ENGINE COMPONENTS RX34497
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Expansion Plug

Brand Part Number Markets Notes Buy
DORMAN Popular 555027
🇺🇸 US 🇨🇦 CA
Nominal Dia.: 38.25mmMetric Dia.
Fitment notes — DORMAN 555027
Nominal Dia.: 38.25mmMetric Dia.38.25mmSteelHeight: 0.570"Open End Dia.: 1.514"
1.50"
View on
Amazon
DORMAN Popular 565027
🇺🇸 US 🇨🇦 CA
Nominal Dia.: 38.25mmMetric Dia.
Fitment notes — DORMAN 565027
Nominal Dia.: 38.25mmMetric Dia.38.25mmOpen End Dia.: 1.511"
1.500" Closed End Diameter1-1/2" Brass Cup
View on
Amazon
DORMAN 568009
🇺🇸 US 🇨🇦 CA
Standard Size: 1-1/2"Metric Size: 38.5mm
Fitment notes — DORMAN 568009
Standard Size: 1-1/2"Metric Size: 38.5mmMetric Max. Expansion: 38.862mm
1-1/2" Quick Seal Copper
View on
Amazon
MELLING MPE152R
🇺🇸 US 🇨🇦 CA
Steel
View on
Amazon
PIONEER PE152R
🇺🇸 US 🇨🇦 CA
Steel
View on
Amazon
PIONEER PE152BR
🇺🇸 US 🇨🇦 CA
Brass or Steel
View on
Amazon
PIONEER PE152B
🇺🇸 US 🇨🇦 CA
Brass
View on
Amazon
QUALCAST 9736
🇺🇸 US 🇨🇦 CA
Steel
View on
Amazon
QUALCAST 9736B
🇺🇸 US 🇨🇦 CA
Brass
View on
Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Intake & Exhaust Manifold Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 13040500
🇺🇸 US 🇨🇦 CA
Engine 128A1.000
View on
Amazon
ELRING 189768
🇺🇸 US 🇨🇦 CA
Sedan
View on
Amazon

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Valve

Brand Part Number Markets Notes Buy
ITM ENGINE COMPONENTS RV34496
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Buying Engine Parts for a 1975 Fiat 128

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 1.3L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Expansion Plug .

Frequently Asked Questions

How many engine parts fit the 1975 Fiat 128?

Our catalog currently lists 52 engine parts for the 1975 Fiat 128 across 17 subcategories and 16 brands, covering the 1.3L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1975 Fiat 128?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1975 Fiat 128 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1975 Fiat 128?

Every part on this page is matched to the 1.3L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1975 Fiat 128

Engine Parts for Other Fiat 128 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.