1976 Fiat 131 Drivetrain Parts

Engine:
1.8L L4

The 1976 Fiat 131 has 11 drivetrain parts with verified fitment on this page — 4 part types and 5 brands, covering the 1.8L L4 engine. Each part includes a manufacturer part number and application notes.

On the 1976 Fiat 131, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Universal Joint (6 parts), Differential Pinion Bearing / Race (2 parts) and Differential Pinion Repair Sleeve (2 parts). The other 1 part type covers the remaining 1 part.

Differential Pinion Bearing / Race

Brand Part Number Markets Notes Buy
SKF HM89410VP
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SKF HM89410VP
Race
Rear
View on
Amazon
SKF HM89443
🇺🇸 US 🇨🇦 CA
with 1.3130 In. Bearing Inside Diameter
Fitment notes — SKF HM89443
with 1.3130 In. Bearing Inside Diameter
Rear1.1250" Cone Length1.1250" Cup Length
View on
Amazon

This table covers the bearings and races on the differential pinion.

Differential Pinion Repair Sleeve

Brand Part Number Markets Notes Buy
SCHAEFFLER SR3475
🇺🇸 US 🇨🇦 CA
Rear16.99 mm Width
Fitment notes — SCHAEFFLER SR3475
Rear16.99 mm Widthwith Flange
View on
Amazon
SKF 99146
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the wear sleeves used to restore a grooved pinion seal surface.

Differential Pinion Seal

Brand Part Number Markets Notes Buy
SKF 14065
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Universal Joint

Economy

Brand Part Number Markets Notes Buy
DANA 25101X
🇺🇸 US 🇨🇦 CA
Spicer SelectNon-Greasable
Fitment notes — DANA 25101X
Spicer SelectNon-Greasable
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Transmission
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GMB Popular 2200500
🇺🇸 US 🇨🇦 CA
GreasableGrease Fitting in Cross
Fitment notes — GMB 2200500
GreasableGrease Fitting in Cross
Rear Shaft All Joints
View on
Amazon
MOOG Popular 341
🇺🇸 US 🇨🇦 CA
Fits Rear Driveshaft at Rear AxleExcept Short Grease Fitting
Fitment notes — MOOG 341
Fits:
Rear Driveshaft at Rear AxleExcept Short Grease Fitting
or:
Rear Driveshaft at Support BearingExcept Short Grease Fitting
View on
Amazon
DANA 5101X
🇺🇸 US 🇨🇦 CA
SpicerNon-Greasable
Fitment notes — DANA 5101X
SpicerNon-Greasable
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Transmission
View on
Amazon
GMB 2200600
🇺🇸 US 🇨🇦 CA
GreasableGrease Fitting in Bearing Cap
Fitment notes — GMB 2200600
GreasableGrease Fitting in Bearing Cap
Rear Shaft All Joints
View on
Amazon
SKF UJ341
🇺🇸 US 🇨🇦 CA
Greaseable
Fitment notes — SKF UJ341
Greaseable
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Support Bearing
View on
Amazon

This table covers the U-joints in the driveshaft.

Buying Drivetrain Parts for a 1976 Fiat 131

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Confirm you have the 1.8L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Universal Joint and Differential Pinion Bearing / Race .

Frequently Asked Questions

How many drivetrain parts fit the 1976 Fiat 131?

Our catalog currently lists 11 drivetrain parts for the 1976 Fiat 131 across 4 subcategories and 5 brands, covering the 1.8L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of drivetrain problems on a 1976 Fiat 131?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1976 Fiat 131 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1976 Fiat 131?

Every part on this page is matched to the 1.8L L4 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1976 Fiat 131

Drivetrain Parts for Other Fiat 131 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.