1981 Fiat 124 Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

2 Band parts for the 1981 Fiat 124 come from 2 brands — ATP and PIONEER.

This group includes ATP EX17 and PIONEER 767050.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

6 Bushing parts are listed for the 1981 Fiat 124, from DURA-BOND, ATP and PIONEER. DURA-BOND 44034 carries the "Popular" badge.

Listed part numbers: DURA-BOND 44034, DURA-BOND 44034TG and ATP CB4, plus the other parts above.

This table covers the Bushing kits. Read more

One part is listed for the 1981 Fiat 124 — PIONEER 754022.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1981 Fiat 124 — DURA-BOND 96040370BR.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

One part is listed for the 1981 Fiat 124 — RAYBESTOS POWERTRAIN 000270.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Dipstick / Fluid Filler Tube Seal parts for the 1981 Fiat 124 come from 2 brands — ATP and PIONEER.

Part numbers include ATP SO35, ATP FO36 and PIONEER 760014, among others listed above.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Extension Housing Seal parts for the 1981 Fiat 124 come from 5 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 2 other brands. The "Popular" part is NATIONAL 9613S.

Part numbers include NATIONAL 9613S, WJB / INMOTION PARTS WS9613S and ATP HO9, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts are listed for the 1981 Fiat 124, from ATP, VARIOUS MFR, HASTINGS / BALDWIN and 2 other brands. ATP B49 carries the "Popular" badge.

In the Economy grade, ATP and VARIOUS MFR supply 2 parts: the catalog's value-priced group. A representative part number is ATP TF49.

The Standard Replacement section lists 4 options from ATP, HASTINGS / BALDWIN, PIONEER and 1 other brand — built to original-equipment specification. ATP B49 is listed in this group.

This group includes ATP B49, ATP TF49 and VARIOUS MFR PT1149 and the remaining parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Fluid Pan Gasket parts are listed for the 1981 Fiat 124, from ATP, FEL-PRO, PIONEER and 1 other brand.

This group includes ATP EG1, FEL-PRO TOS18643 and PIONEER 749034 and the remaining parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 1981 Fiat 124.

This group includes DURA-BOND JET22 and DURA-BOND JET22TG.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts for the 1981 Fiat 124 come from 2 brands — ATP and PIONEER.

This group includes ATP EG3 and PIONEER 7490855.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

3 Fluid Pump Repair Sleeve parts for the 1981 Fiat 124 come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Fluid Pump Seal parts for the 1981 Fiat 124 come from 5 brands — NATIONAL, ATP, BCA and 2 other brands. The "Popular" part is NATIONAL 6712NA.

Listed part numbers: NATIONAL 6712NA, ATP CO13 and BCA NS6712NA, plus the other parts above.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

This group shows a single part: PIONEER 748048.

This table covers the governors and modulators that control transmission shift pressure. Read more

5 Governor / Modulator parts are listed for the 1981 Fiat 124, from PIONEER and ATP. ATP EX7 carries the "Popular" badge.

Part numbers include ATP EX7, ATP EX21 and PIONEER 747025, among others listed above.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 1981 Fiat 124 come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS8792S, NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts are listed for the 1981 Fiat 124, from ACDELCO and SCHAEFFLER.

This group includes ACDELCO 9613S, ACDELCO 5200 and SCHAEFFLER SS2569 and the remaining parts above.

This table covers the rebuild kits for this assembly. Read more

3 Rebuild Kit parts for the 1981 Fiat 124 come from PA CARGO.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK5400S is listed in this group.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PA CARGO — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PA CARGO MRK5400 is listed in this group.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 1 option from PA CARGO — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K54900 is listed in this group.

Part numbers include PA CARGO DK5400S, PA CARGO MRK5400 and PA CARGO K54900.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Shift Shaft Seal parts for the 1981 Fiat 124 come from 3 brands — ACDELCO, PIONEER and SCHAEFFLER.

Listed part numbers: ACDELCO 8792S, PIONEER 759022 and SCHAEFFLER SS2114.

This table covers the seals at the Speedometer Pinion. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Speedometer Pinion Seal parts for the 1981 Fiat 124 come from 2 brands — ATP and PIONEER.

Part numbers include ATP SO34 and PIONEER 759024.

This table covers the one-way sprag clutches in the transmission. Read more

This group shows a single part: PIONEER 764009.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 24050.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 1981 Fiat 124 — TC REMANUFACTURING B13.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 1981 Fiat 124 — ATP EE1.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

This group shows a single part: SCHAEFFLER SR3506.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS2912.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 1981 Fiat 124. LUBEGARD 19610 carries the "Popular" badge.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.