1982 Fiat Strada Drivetrain Parts

Engine:
1.5L L4

The 1982 Fiat Strada has 11 drivetrain parts with verified fitment on this page — 2 part types and 5 brands, covering the 1.5L L4 engine. Each part includes a manufacturer part number and application notes.

On the 1982 Fiat Strada, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. All 11 listed parts are Differential Carrier Bearing / Race (7 parts) and CV Joint Boot (4 parts).

CV Joint Boot

Brand Part Number Markets Notes Buy
DORMAN 614001
🇺🇸 US 🇨🇦 CA
Joint Diameter 3.58"Shaft End Inside Diameter .93"
Fitment notes — DORMAN 614001
Joint Diameter 3.58"Shaft End Inside Diameter .93"
Front OuterJoint Diameter 3.58"
View on
Amazon
DORMAN 03680
🇺🇸 US 🇨🇦 CA
OuterJoint Diameter 3.83"
View on
Amazon
DORMAN 614002
🇺🇸 US 🇨🇦 CA
Joint Diameter 3.3"Shaft End Inside Diameter 0.87"
Fitment notes — DORMAN 614002
Joint Diameter 3.3"Shaft End Inside Diameter 0.87"
InnerJoint Diameter 3.3"
View on
Amazon
DORMAN 614701
🇺🇸 US 🇨🇦 CA
OuterQuick-Boot
View on
Amazon

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.

Differential Carrier Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular WTLM29749
🇺🇸 US 🇨🇦 CA
Bearing Shape: Cylindrical
Fitment notes — WJB / INMOTION PARTS WTLM29749
Bearing Shape: Cylindrical
Automatic trans.with VW 010 Transmission
View on
Amazon
FAMOUS BRAND SLM29749
🇺🇸 US 🇨🇦 CA
with Auto Trans
View on
Amazon
WJB / INMOTION PARTS WTLM29710
🇺🇸 US 🇨🇦 CA
RaceCup Outside Diameter (mm): 65.09 MM
Fitment notes — WJB / INMOTION PARTS WTLM29710
RaceCup Outside Diameter (mm): 65.09 MM
Automatic trans.with VW 010 Transmission
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
NATIONAL Popular LM29749
🇺🇸 US 🇨🇦 CA
Taper Bearing Cone
Fitment notes — NATIONAL LM29749
Taper Bearing Cone
Automatic trans.with VW 010 Transmission
View on
Amazon
BCA NBLM29710
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — BCA NBLM29710
Race
Automatic trans.
View on
Amazon
BCA NBLM29749
🇺🇸 US 🇨🇦 CA
Bearing Shape: Cylindrical
Fitment notes — BCA NBLM29749
Bearing Shape: Cylindrical
Automatic trans.
View on
Amazon
NATIONAL LM29710
🇺🇸 US 🇨🇦 CA
Taper Bearing CupRace Only
Fitment notes — NATIONAL LM29710
Taper Bearing CupRace Only
Automatic trans.with VW 010 Transmission
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Buying Drivetrain Parts for a 1982 Fiat Strada

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Confirm you have the 1.5L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Differential Carrier Bearing / Race and CV Joint Boot .

Frequently Asked Questions

How many drivetrain parts fit the 1982 Fiat Strada?

Our catalog currently lists 11 drivetrain parts for the 1982 Fiat Strada across 2 subcategories and 5 brands, covering the 1.5L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of drivetrain problems on a 1982 Fiat Strada?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1982 Fiat Strada was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1982 Fiat Strada?

Every part on this page is matched to the 1.5L L4 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1982 Fiat Strada

Drivetrain Parts for Other Fiat Strada Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.