2005 Fiat Palio Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

68 Engine parts are listed for the 2005 Fiat Palio, in 19 part types, covering both the 1.6L L4 and the 1.8L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 2005 Fiat Palio covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (9 parts), Valve Stem Seal (7 parts) and Crankshaft Seal (6 parts). The other 16 part types cover the remaining 46 parts.

Camshaft

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 93043600
🇲🇽 MX
IntakeEngine # 178E7.000
View on
Amazon
AJUSA Fits: 1.6L L4 93043800
🇲🇽 MX
ExhaustEngine # 178E7.000
View on
Amazon
AJUSA Fits: 1.8L L4 93017900
🇲🇽 MX
Engine # OHC-171190
View on
Amazon

This table covers the camshafts that open the valves.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 15009700
🇲🇽 MX
30 X 52 X 7Clockwise
Fitment notes — AJUSA 15009700
30 X 52 X 7ClockwiseEngine 178E7.000
View on
Amazon
AJUSA Fits: 1.8L L4 15012600
🇲🇽 MX
35 X 48 X 7Clockwise
Fitment notes — AJUSA 15012600
35 X 48 X 7ClockwiseEngine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 440750
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 702269
🇲🇽 MX
Inner Diameter [MM]: 35Radial Shaft Seal Design: AwithBS
Fitment notes — ELRING 702269
Inner Diameter [MM]: 35Radial Shaft Seal Design: AwithBSSwirl Type: Right-hand Twist
Adventure
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.6L L4 CR4099AM
🇲🇽 MX
SetBimetal (Aluminum Base)
Fitment notes — KING ENGINE BEARINGS CR4099AM
SetBimetal (Aluminum Base)
3 Oil Holes - 1 At Center and 2 At 15 Degrees From Center
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 54110200
🇲🇽 MX
Engine 178E7.000To 505168
View on
Amazon
AJUSA Fits: 1.6L L4 54126100
🇲🇽 MX
Engine 178E7.000From 505169
View on
Amazon
AJUSA Fits: 1.8L L4 54077800
🇲🇽 MX
Engine OHC-171190
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 15017500
🇲🇽 MX
FrontClockwise
Fitment notes — AJUSA 15017500
FrontClockwiseEngine 178E7.000
View on
Amazon
AJUSA Fits: 1.6L L4 71000700
🇲🇽 MX
RearEngine 178E7.000
View on
Amazon
AJUSA Fits: 1.8L L4 15035700
🇲🇽 MX
RearCounter Clockwise
Fitment notes — AJUSA 15035700
RearCounter ClockwiseEngine OHC-171190
View on
Amazon
AJUSA Fits: 1.8L L4 15008300
🇲🇽 MX
FrontClockwise or Counter Clockwise
Fitment notes — AJUSA 15008300
FrontClockwise or Counter ClockwiseEngine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 199180
🇲🇽 MX
Swirl Type: Left-hand Twist
View on
Amazon
ELRING Fits: 1.6L L4 440760
🇲🇽 MX
Dust Cover: without dust LipMaterial: FPM (Fluoride Rubber)
Fitment notes — ELRING 440760
Dust Cover: without dust LipMaterial: FPM (Fluoride Rubber)Swirl Type: Right-hand Twist
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 81017900
🇲🇽 MX
Engine 178E7.000
View on
Amazon
AJUSA Fits: 1.8L L4 81004800
🇲🇽 MX
Engine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 104270
🇲🇽 MX
Set
View on
Amazon
ELRING Fits: 1.8L L4 820262
🇲🇽 MX
SetBolt Head-/Nut Design: Male Torx
Fitment notes — ELRING 820262
SetBolt Head-/Nut Design: Male TorxThread Size: M10X1,25x140
Adventure
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 1.6L L4 198870
🇲🇽 MX
Diameter [MM]: 80,8Gasket Design: Fiber Composite
View on
Amazon
AJUSA Fits: 1.6L L4 10136100
🇲🇽 MX
81 Bore DiameterEngine 178E7.000
Fitment notes — AJUSA 10136100
81 Bore DiameterEngine 178E7.000To 505168
View on
Amazon
AJUSA Fits: 1.6L L4 10151200
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10151200
Multi Layered Steel
81.5 Bore DiameterEngine 178E7.000From 505169
View on
Amazon
AJUSA Fits: 1.8L L4 10158300
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10158300
Multi Layered Steel
82 Bore DiameterEngine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 761293
🇲🇽 MX
Gasket Design: Multilayer Steel (MLS)
View on
Amazon
ELRING Fits: 1.6L L4 710380
🇲🇽 MX
Diameter [MM]: 87Gasket Design: Fiber Composite
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 1.6L L4 198890
🇲🇽 MX
with cylinder head cover gasket,with valve stem sealsGasket Design: Fiber Composite
View on
Amazon
AJUSA Fits: 1.6L L4 52188000
🇲🇽 MX
Engine 178E7.000To 505168
View on
Amazon
AJUSA Fits: 1.6L L4 52210200
🇲🇽 MX
Engine 178E7.000From 505169
View on
Amazon
AJUSA Fits: 1.8L L4 52221000
🇲🇽 MX
Engine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 198920
🇲🇽 MX
with cylinder head cover gasket,with valve stem sealsGasket Design: Multilayer Steel (MLS)
View on
Amazon
ELRING Fits: 1.6L L4 710370
🇲🇽 MX
Includes Valve Stem Seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 1.6L L4 198880
🇲🇽 MX
with crankshaft seal,with cylinder head cover gasket,with cylinder head gasket,with valve stem sealsGasket Design: Fiber Composite
View on
Amazon
AJUSA Fits: 1.6L L4 50203500
🇲🇽 MX
Engine 178E7.000To 505168
View on
Amazon
AJUSA Fits: 1.6L L4 50225100
🇲🇽 MX
Engine 178E7.000From 505169
View on
Amazon
AJUSA Fits: 1.8L L4 50236900
🇲🇽 MX
Engine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 198910
🇲🇽 MX
with crankshaft seal,with cylinder head cover gasket,with cylinder head gasket,with valve stem sealsGasket Design: Multilayer Steel (MLS)
View on
Amazon
ELRING Fits: 1.6L L4 710360
🇲🇽 MX
with valve stem seals
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 1.6L L4 103075
🇲🇽 MX
1.177 Head DIA. Bravo, Marea, Palio, Stilo
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 13116700
🇲🇽 MX
Engine 178E7.000
View on
Amazon
AJUSA Fits: 1.8L L4 13079600
🇲🇽 MX
Engine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 375290
🇲🇽 MX
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
QUALCAST Fits: 1.6L L4 103074
🇲🇽 MX
1.193 Head DIA. Bravo, Marea, Palio, Stilo
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil Drain Plug

Brand Part Number Markets Notes Buy
ELRING Fits: 1.6L L4 587100
🇲🇽 MX
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 21012700
🇲🇽 MX
Engine OHC-171190
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD Fits: all 2005 Palio engines MO107
🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
PRO-TEC Popular Fits: 1.8L L4 PXL51381
🇲🇽 MX
View on
Amazon
PUROLATOR Fits: 1.6L L4 L17662
🇲🇽 MX
Outer Diameter Bottom: 2.98 InStyle: Spin-On Lube Filter
View on
Amazon
PUROLATOR Fits: 1.8L L4 L10193
🇲🇽 MX
Bypass Relief Valve Setting: 15-18 PSIMedia Material: Cellulose
Fitment notes — PUROLATOR L10193
Bypass Relief Valve Setting: 15-18 PSIMedia Material: CelluloseOuter Diameter Bottom: 3.7 In
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WIX Popular Fits: 1.8L L4 51381
🇲🇽 MX
View on
Amazon
HENGST Fits: 1.8L L4 H10W09
🇲🇽 MX
Spin-On
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 OC983
🇲🇽 MX
View on
Amazon
MANN Fits: 1.6L L4 W7128
🇲🇽 MX
Bypass Relief Valve Setting: 22 PSI
View on
Amazon
MANN Fits: 1.8L L4 W9171
🇲🇽 MX
Anti-Drain Back Valve: YESBypass Relief Valve Setting: 16 PSI
View on
Amazon
WIX Fits: 1.6L L4 57046
🇲🇽 MX
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 11062200
🇲🇽 MX
Engine 178E7.000
View on
Amazon
AJUSA Fits: 1.8L L4 11043400
🇲🇽 MX
Engine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 861510
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 828564
🇲🇽 MX
For Aluminum Cylinder Head Cover
Fitment notes — ELRING 828564
For Aluminum Cylinder Head Cover
Adventure
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 85014200
🇲🇽 MX
Engine 178E7.000
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 57013800
🇲🇽 MX
Engine 178E7.000
View on
Amazon
AJUSA Fits: 1.8L L4 12002300
🇲🇽 MX
6 x 10.5 x 10Engine OHC-171190
View on
Amazon
AJUSA Fits: 1.8L L4 57003800
🇲🇽 MX
Engine OHC-171190
View on
Amazon
ELRING Fits: 1.6L L4 701289
🇲🇽 MX
Height [MM]: 10Inner Diameter [MM]: 9,8
Fitment notes — ELRING 701289
Height [MM]: 10Inner Diameter [MM]: 9,8Material: FPM (fluoride rubber)Outer Diameter [MM]: 13,2Outside Diameter: 13.2 mm
View on
Amazon
ELRING Fits: 1.6L L4 825042
🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
Fitment notes — ELRING 825042
SetMaterial: FPM (fluoride rubber)Valve Stem Diameter [MM]: 7
View on
Amazon
ELRING Fits: 1.8L L4 586693
🇲🇽 MX
Height [MM]: 9,8Inner Diameter [MM]: 11,1
Fitment notes — ELRING 586693
Height [MM]: 9,8Inner Diameter [MM]: 11,1Material: FPM (fluoride rubber)Valve Stem Diameter [MM]: 7
Adventure
View on
Amazon
ELRING Fits: 1.8L L4 216730
🇲🇽 MX
Set
Fitment notes — ELRING 216730
Set
Adventure
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2005 Fiat Palio

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Valve Stem Seal .

Frequently Asked Questions

How many engine parts fit the 2005 Fiat Palio?

Our catalog currently lists 68 engine parts for the 2005 Fiat Palio across 19 subcategories and 11 brands, covering both the 1.6L L4 and the 1.8L L4. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2005 Fiat Palio engines?

Some do. 1 part fits every engine; the other 67 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2005 Fiat Palio?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2005 Fiat Palio was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2005 Fiat Palio?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2005 Fiat Palio

Engine Parts for Other Fiat Palio Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.