The 2008 Fiat Punto has 5 ignition parts with verified fitment on this page — 3 part types and 3 brands, covering both the 1.4L L4 and the 1.4L L4 Turbocharged. Each part includes a manufacturer part number and application notes.
On the 2008 Fiat Punto, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 5 listed parts are Camshaft Position Sensor (2 parts), Crankshaft Position Sensor (2 parts) and Ignition Coil (1 part).
The 2008 Fiat Punto was sold with both the 1.4L L4 and the 1.4L L4 Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2008 Fiat Punto ignition parts are WALKER PRODUCTS (3 parts), MARELLI (1 part) and UNITED MOTOR PRODUCTS (1 part).
Each part number listed for the 2008 Fiat Punto opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MARELLI Fits: 1.4L L4 | SAC095 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 1.4L L4 | 2351701 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
2 Camshaft Position Sensor parts are listed for the 2008 Fiat Punto, from MARELLI and WALKER PRODUCTS.
Listed part numbers: MARELLI SAC095 and WALKER PRODUCTS 2351701.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS Fits: 1.4L L4 | 2351977 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WALKER PRODUCTS Fits: 1.4L L4 | 2351954 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
WALKER PRODUCTS supplies both parts for the 2008 Fiat Punto.
Listed part numbers: WALKER PRODUCTS 2351977 and WALKER PRODUCTS 2351954.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Fits: 1.4L L4 | COP607 | 🇲🇽 MX | Fits Body code GPT420G | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
One part is listed for the 2008 Fiat Punto — UNITED MOTOR PRODUCTS COP607.
Buying Ignition Parts for a 2008 Fiat Punto
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2008 Fiat Punto?
Our catalog currently lists 5 ignition parts for the 2008 Fiat Punto across 3 subcategories and 3 brands, covering both the 1.4L L4 and the 1.4L L4 Turbocharged. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2008 Fiat Punto engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2008 Fiat Punto?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Fiat Punto was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Fiat Punto?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Fiat Punto
Ignition Parts for Other Fiat Punto Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.