The 2011 Fiat Palio has 4 ignition parts with verified fitment on this page — 3 part types and 3 brands, covering the 1.8L L4 engine. Each part includes a manufacturer part number and application notes.
On the 2011 Fiat Palio, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 4 listed parts are Spark Plug Wire (2 parts), Ignition Coil (1 part) and Spark Plug (1 part).
The 2011 Fiat Palio came with a single engine, the 1.8L L4, and every part is verified against it.
3 brands supply ignition parts for the 2011 Fiat Palio, led by STANDARD MOTOR PRODUCTS (2 parts), HOLSTEIN (1 part) and ACDELCO (1 part). Quality grades include Premium and Standard Replacement.
Each part number listed for the 2011 Fiat Palio opens a page with every vehicle that part fits.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2IGC0344 | 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
This group shows a single part: HOLSTEIN 2IGC0344.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | 4 | 🇺🇸 US 🇨🇦 CA | ProfessionalRapidfire | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
One part is listed for the 2011 Fiat Palio — ACDELCO 4.
Spark Plug Wire
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 9703 | 🇲🇽 MX | SetOE Performance Plus | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 29703 | 🇲🇽 MX | Pro SeriesSet | View on Amazon |
This table covers the Spark Plug wires.
2 Spark Plug Wire parts for the 2011 Fiat Palio come from STANDARD MOTOR PRODUCTS.
In the Premium grade, STANDARD MOTOR PRODUCTS supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS 9703.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS 29703.
Listed part numbers: STANDARD MOTOR PRODUCTS 9703 and STANDARD MOTOR PRODUCTS 29703.
Buying Ignition Parts for a 2011 Fiat Palio
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.8L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug Wire and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2011 Fiat Palio?
Our catalog currently lists 4 ignition parts for the 2011 Fiat Palio across 3 subcategories and 3 brands, covering the 1.8L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2011 Fiat Palio?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2011 Fiat Palio?
Notes on this page include pre-set gaps of 0.041" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Fiat Palio was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2011 Fiat Palio?
Every part on this page is matched to the 1.8L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2011 Fiat Palio
Ignition Parts for Other Fiat Palio Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.