5 Steering parts are listed for the 2017 Fiat 500, in 2 part types, covering all 3 engine options (1.4L L4, 1.4L L4 Turbocharged and ELECTRIC). Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2017 Fiat 500, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 5 listed parts are Rack and Pinion (3 parts) and Knuckle (2 parts).
The 2017 Fiat 500 was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
3 brands supply steering parts for the 2017 Fiat 500, led by MOPAR (3 parts), MAVAL (1 part) and TERREPOWER (1 part). Quality grades include Remanufactured and New.
Each part number listed for the 2017 Fiat 500 opens a page with every vehicle that part fits.
Knuckle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: ELECTRIC | 4877763AA | 🇺🇸 US 🇨🇦 CA | Fits LeftFront | View on Amazon |
| MOPAR Fits: ELECTRIC | 4877762AA | 🇺🇸 US 🇨🇦 CA | Fits RightFront | View on Amazon |
This table covers the steering knuckles that carry the hub, caliper and ball joints.
MOPAR supplies both parts for the 2017 Fiat 500.
This group includes MOPAR 4877763AA and MOPAR 4877762AA.
Rack and Pinion
New
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: ELECTRIC | 5154533AC | 🇺🇸 US 🇨🇦 CA | Fits Front2 door Hatchback | View on Amazon |
Remanufactured
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAVAL Fits: ELECTRIC | 94498M | 🇺🇸 US | Remanufactured Rack and Pinion Assembly | View on Amazon |
| TERREPOWER Fits: ELECTRIC | 2020127 | 🇺🇸 US | Remanufactured | View on Amazon |
This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak.
3 Rack and Pinion parts are listed for the 2017 Fiat 500, from MOPAR, MAVAL and TERREPOWER.
In the New grade, MOPAR supplies 1 part: brand-new units rather than rebuilt ones. A representative part number is MOPAR 5154533AC.
In the Remanufactured grade, MAVAL and TERREPOWER supply 2 parts: factory-rebuilt units with new wear components. A representative part number is MAVAL 94498M.
Listed part numbers: MOPAR 5154533AC, MAVAL 94498M and TERREPOWER 2020127.
Buying Steering Parts for a 2017 Fiat 500
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Match the engine first. Every steering part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Rack and Pinion and Knuckle .
Frequently Asked Questions
How many steering parts fit the 2017 Fiat 500?
Our catalog currently lists 5 steering parts for the 2017 Fiat 500 across 2 subcategories and 3 brands, covering all 3 engine options (1.4L L4, 1.4L L4 Turbocharged and ELECTRIC). Each part is matched to the engine(s) it fits.
Do steering parts differ between 2017 Fiat 500 engines?
Yes. Every steering part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of steering problems on a 2017 Fiat 500?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2017 Fiat 500 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2017 Fiat 500?
First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2017 Fiat 500
Steering Parts for Other Fiat 500 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.