2021 Fiat Argo Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 36 engine parts for the 2021 Fiat Argo, across 16 part types, covering both the 1.3L L4 and the 1.8L L4. Every part shows its brand, manufacturer part number and fitment notes.

On the 2021 Fiat Argo, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 11 parts of the 36 listed are Crankshaft Seal (4 parts), Valve Cover Gasket (4 parts) and Cylinder Head Gasket (3 parts). The other 13 part types cover the remaining 25 parts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 54126900
🇲🇽 MX
Engine # 370A0.011
View on
Amazon
ELRING Fits: 1.8L L4 903590
🇲🇽 MX
with Crankshaft Seal
Fitment notes — ELRING 903590
with Crankshaft Seal
HGT ModelBody code: X6H
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 15059100
🇲🇽 MX
Rear91 X 111 X 10
Fitment notes — AJUSA 15059100
Rear91 X 111 X 10Counter ClockwiseEngine # 370A0.011
View on
Amazon
ELRING Fits: 1.3L L4 247290
🇲🇽 MX
Inner Diameter [mm]: 80Material: FPM (Fluoride Rubber)
Fitment notes — ELRING 247290
Inner Diameter [mm]: 80Material: FPM (Fluoride Rubber)Outer Diameter [mm]: 96Swirl Type: Left-hand Twist
DriveBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 583050
🇲🇽 MX
Height [MM]: 6Inner Diameter [mm]: 32
Fitment notes — ELRING 583050
Height [MM]: 6Inner Diameter [mm]: 32Material: FPM (Fluoride Rubber)Radial Shaft Seal Design: ASSwirl Type: Right-hand Twist
HGT ModelBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 902760
🇲🇽 MX
Inner Diameter [mm]: 91Material: FPM (Fluoride Rubber)
Fitment notes — ELRING 902760
Inner Diameter [mm]: 91Material: FPM (Fluoride Rubber)Outer Diameter [mm]: 111Radial Shaft Seal Design: A/BSSwirl Type: Left-hand Twist
HGT ModelBody code: X6H
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 10251600
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10251600
Multi Layered Steel
82 Bore DiameterEngine # 370A0.011
View on
Amazon
ELRING Fits: 1.3L L4 360140
🇲🇽 MX
DriveBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 571670
🇲🇽 MX
HGT ModelBody code: X6H
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 52572000
🇲🇽 MX
Engine # 370A0.011
View on
Amazon
ELRING Fits: 1.3L L4 889680
🇲🇽 MX
without valve stem seals
Fitment notes — ELRING 889680
without valve stem seals
DriveBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 572920
🇲🇽 MX
Includes Valve Stem Seals
Fitment notes — ELRING 572920
Includes Valve Stem Seals
HGT ModelBody code: X6H
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 50524400
🇲🇽 MX
Engine # 370A0.011
View on
Amazon
ELRING Fits: 1.8L L4 574370
🇲🇽 MX
with crankshaft sealwith valve stem seals
Fitment notes — ELRING 574370
with crankshaft sealwith valve stem seals
HGT ModelBody code: X6H
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 13286200
🇲🇽 MX
Engine # 370A0.011
View on
Amazon
ELRING Fits: 1.3L L4 535330
🇲🇽 MX
DriveBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 939340
🇲🇽 MX
HGT ModelBody code: X6H
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
ELRING Fits: 1.3L L4 298480
🇲🇽 MX
with Seal RingThread Size: M14X1,5x18
Fitment notes — ELRING 298480
with Seal RingThread Size: M14X1,5x18
DriveBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 012001
🇲🇽 MX
with Seal RingSpanner Size: 13 mm
Fitment notes — ELRING 012001
with Seal RingSpanner Size: 13 mmThread Size: M14X1,5x20
HGT ModelBody code: X6H
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 01115300
🇲🇽 MX
Engine # 370A0.011
View on
Amazon
ELRING Fits: 1.8L L4 176090
🇲🇽 MX
Material: ElastomerShape: Asymmetrical
Fitment notes — ELRING 176090
Material: ElastomerShape: Asymmetrical
HGT ModelBody code: X6H
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Brand Part Number Markets Notes Buy
VARIOUS MFR Fits: all 2021 Argo engines PO7695
🇲🇽 MX
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Housing Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 903570
🇲🇽 MX
Housing Material: Cast Aluminium
Fitment notes — ELRING 903570
Housing Material: Cast Aluminium
HGT ModelBody code: X6H
View on
Amazon

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 485960
🇲🇽 MX
Material: Ethylene Acrylic Elastomer (AEM)
Fitment notes — ELRING 485960
Material: Ethylene Acrylic Elastomer (AEM)
HGT ModelBody code: X6H
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 571850
🇲🇽 MX
RightHGT Model
Fitment notes — ELRING 571850
RightHGT ModelBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 573060
🇲🇽 MX
LeftHGT Model
Fitment notes — ELRING 573060
LeftHGT ModelBody code: X6H
View on
Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 1.8L L4 2C5185
🇲🇽 MX
Full SetTop Ring Surface Treatment: Chrome
Fitment notes — HASTINGS MANUFACTURING 2C5185
Full SetTop Ring Surface Treatment: ChromeTop Groove: 1.20 mm2nd Groove: 1.20 mm1ST Oil Groove: 2.00 mmfor 2 Ring Piston
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 574080
🇲🇽 MX
with Crankshaft Seal
Fitment notes — ELRING 574080
with Crankshaft Seal
HGT ModelBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 571760
🇲🇽 MX
HGT ModelBody code: X6H
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 56069900
🇲🇽 MX
Engine # 370A0.011
View on
Amazon
ELRING Fits: 1.3L L4 531050
🇲🇽 MX
DriveBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 518030
🇲🇽 MX
Material: Polyacrylate Rubber (ACM)
Fitment notes — ELRING 518030
Material: Polyacrylate Rubber (ACM)
HGT ModelBody code: X6H
View on
Amazon
ELRING Fits: 1.8L L4 763880
🇲🇽 MX
Material: Zinc-Copper brazing alloy (ZN-CU)
Fitment notes — ELRING 763880
Material: Zinc-Copper brazing alloy (ZN-CU)
HGT ModelBody code: X6H
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 12013600
🇲🇽 MX
5 X 10.9 X 18Engine # 370A0.011
View on
Amazon
AJUSA Fits: 1.8L L4 57027400
🇲🇽 MX
Engine # 370A0.011
View on
Amazon
ELRING Fits: 1.8L L4 191420
🇲🇽 MX
Set
Fitment notes — ELRING 191420
Set
HGT ModelBody code: X6H
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2021 Fiat Argo

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Valve Cover Gasket .

Frequently Asked Questions

How many engine parts fit the 2021 Fiat Argo?

Our catalog currently lists 36 engine parts for the 2021 Fiat Argo across 16 subcategories and 4 brands, covering both the 1.3L L4 and the 1.8L L4. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2021 Fiat Argo engines?

Some do. 1 part fits every engine; the other 35 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2021 Fiat Argo?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Fiat Argo was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Fiat Argo?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Fiat Argo

Engine Parts for Other Fiat Argo Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.