2016 Ford F-750 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2016 Ford F-750 has 196 engine parts with verified fitment on this page — 58 part types and 28 brands, covering both the 6.7L V8 DIESEL Turbocharged and the 6.8L V10. Each part includes a manufacturer part number and application notes.

The engine on the 2016 Ford F-750 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (16 parts), Cylinder Head (10 parts) and Cylinder Head Gasket (8 parts). The other 55 part types cover the remaining 162 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
DURA-BOND Fits: 6.7L V8 DIESEL Turbocharged F67
🇺🇸 US 🇨🇦 CA
View on
Amazon
DURA-BOND Fits: 6.7L V8 DIESEL Turbocharged F67X3
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINE PRO Fits: 6.7L V8 DIESEL Turbocharged 152232
🇺🇸 US 🇨🇦 CA
View on
Amazon
SEALED POWER Fits: 6.7L V8 DIESEL Turbocharged 1936M
🇺🇸 US 🇨🇦 CA
Standard
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 6.7L V8 DIESEL Turbocharged CR8056SV
🇺🇸 US 🇨🇦 CA
SetSilver Based
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
ENGINE PRO Fits: 6.8L V10 37261622
🇺🇸 US 🇨🇦 CA
View on
Amazon
FEL-PRO Fits: 6.8L V10 CS261622
🇺🇸 US 🇨🇦 CA
Permadry Rubber Oil Pan Gasket(s) Included
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged CS54886A
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 CS54242
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 CS261622
🇺🇸 US 🇨🇦 CA
SetMolded Rubber Oil Pan Gasket(s) Included
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 16270
🇺🇸 US 🇨🇦 CA
RearUse with Installation tool
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.8L V10 TCS46117
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
FEL-PRO Popular Fits: 6.8L V10 BS40620
🇺🇸 US 🇨🇦 CA
Rubber
Fitment notes — FEL-PRO BS40620
Rubber
Rear1 PieceEarly Model(s)
View on
Amazon
FEL-PRO Fits: 6.8L V10 BS40644
🇺🇸 US 🇨🇦 CA
PTFE RubberIncludes Sleeve
Fitment notes — FEL-PRO BS40644
PTFE RubberIncludes Sleeve
Rear1 PieceLate Model(s)
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged JV1733
🇺🇸 US 🇨🇦 CA
Includes Rear Cover GasketPTFE (Polytetrafluoroethylene)
Fitment notes — MAHLE / CLEVITE JV1733
Includes Rear Cover GasketPTFE (Polytetrafluoroethylene)Rear
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 67616
🇺🇸 US 🇨🇦 CA
Timing Cover SealRubber
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 JV1612
🇺🇸 US 🇨🇦 CA
SetRubber
Fitment notes — MAHLE / CLEVITE JV1612
SetRubberRear
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 JV1635
🇺🇸 US 🇨🇦 CA
Plastic
Fitment notes — MAHLE / CLEVITE JV1635
Plastic
Rear Installation Sleeve Included
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head

Brand Part Number Markets Notes Buy
CYLINDER HEAD EXPRESS Popular Fits: 6.7L V8 DIESEL Turbocharged CI431LL
🇺🇸 US 🇨🇦 CA
New Cylinder Head with New Valves and Springs
Fitment notes — CYLINDER HEAD EXPRESS CI431LL
New Cylinder Head with New Valves and Springs
LeftUsed with Orange Insulator Glow Plug
View on
Amazon
CYLINDER HEAD EXPRESS Popular Fits: 6.7L V8 DIESEL Turbocharged CI432LR
🇺🇸 US 🇨🇦 CA
New Cylinder Head with New Valves and Springs
Fitment notes — CYLINDER HEAD EXPRESS CI432LR
New Cylinder Head with New Valves and Springs
RightUsed with Orange Insulator Glow Plug
View on
Amazon
CYLINDER HEAD EXPRESS Fits: 6.7L V8 DIESEL Turbocharged CI431BL
🇺🇸 US 🇨🇦 CA
New Bare Cylinder Head Casting - No Valves or Springs
Fitment notes — CYLINDER HEAD EXPRESS CI431BL
New Bare Cylinder Head Casting - No Valves or Springs
LeftUsed with Orange Insulator Glow Plug
View on
Amazon
CYLINDER HEAD EXPRESS Fits: 6.7L V8 DIESEL Turbocharged CI432BR
🇺🇸 US 🇨🇦 CA
New Bare Cylinder Head Casting - No Valves or Springs
Fitment notes — CYLINDER HEAD EXPRESS CI432BR
New Bare Cylinder Head Casting - No Valves or Springs
RightUsed with Orange Insulator Glow Plug
View on
Amazon
CYLINDER HEAD EXPRESS Fits: 6.8L V10 CI428BL
🇺🇸 US 🇨🇦 CA
New Bare Cylinder Head Casting - No Valves or Springs
Fitment notes — CYLINDER HEAD EXPRESS CI428BL
New Bare Cylinder Head Casting - No Valves or Springs
Left12mm Spark PlugsCasting # 5C3E
View on
Amazon
CYLINDER HEAD EXPRESS Fits: 6.8L V10 CI429BR
🇺🇸 US 🇨🇦 CA
New Bare Cylinder Head Casting - No Valves or Springs
Fitment notes — CYLINDER HEAD EXPRESS CI429BR
New Bare Cylinder Head Casting - No Valves or Springs
Right12mm Spark PlugsCasting # 5C3E
View on
Amazon
ENGINE PRO Fits: 6.7L V8 DIESEL Turbocharged 910092
🇺🇸 US 🇨🇦 CA
BareDoes not include Valves, Cam, or Springs
Fitment notes — ENGINE PRO 910092
BareDoes not include Valves, Cam, or Springs
Powerstroke2011-Up C# RFHC30-6C064AA Left Side
View on
Amazon
ENGINE PRO Fits: 6.7L V8 DIESEL Turbocharged 910093
🇺🇸 US 🇨🇦 CA
BareDoes not include Valves, Cam, or Springs
Fitment notes — ENGINE PRO 910093
BareDoes not include Valves, Cam, or Springs
RightPowerstroke EngineCasting#: RF3Z306090CC
View on
Amazon
QUALCAST Fits: 6.7L V8 DIESEL Turbocharged 16267001R
🇺🇸 US 🇨🇦 CA
RightAluminum Right OE New Bare with Seats, Guides, Injector Tubes
View on
Amazon
QUALCAST Fits: 6.7L V8 DIESEL Turbocharged 16267001L
🇺🇸 US 🇨🇦 CA
LeftAluminum Left OE New Bare with Seats, Guides, Injector Tubes
View on
Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 ES727981
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO ES727981
Set
Head Bolts with Washers
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged GS33693
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 GS33531
🇺🇸 US 🇨🇦 CA
Steel
Fitment notes — MAHLE / CLEVITE GS33531
Steel
with Integrated Washers
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.8L V10 26303PT
🇺🇸 US 🇨🇦 CA
Perma TorqueMLS
Fitment notes — FEL-PRO 26303PT
Perma TorqueMLS
Right
View on
Amazon
FEL-PRO Popular Fits: 6.8L V10 26302PT
🇺🇸 US 🇨🇦 CA
Perma TorqueMLS
Fitment notes — FEL-PRO 26302PT
Perma TorqueMLS
Left
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged 54886
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54886
Multi-Layered Steel
Left
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged 54887
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54887
Multi-Layered Steel
Right
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 54591
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54591
Multi-Layered Steel
Left
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 54592
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54592
Multi-Layered Steel
Right
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 26302PT
🇺🇸 US 🇨🇦 CA
Head Bolt Replacement RecommendedHead Bolts Not Included
Fitment notes — ULTRA-POWER 26302PT
Head Bolt Replacement RecommendedHead Bolts Not IncludedLeft
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 26303PT
🇺🇸 US 🇨🇦 CA
Head Bolt Replacement RecommendedHead Bolts Not Included
Fitment notes — ULTRA-POWER 26303PT
Head Bolt Replacement RecommendedHead Bolts Not IncludedRight
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 HS26302PT
🇺🇸 US 🇨🇦 CA
Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals
View on
Amazon
FEL-PRO Fits: 6.8L V10 HS26302PTVK
🇺🇸 US 🇨🇦 CA
Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals
Fitment notes — FEL-PRO HS26302PTVK
Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals
Head Bolts with WashersHead Bolt Replacement Recommended
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged HS54887A
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS54887A
Includes Valve Stem Seals
Use with GS33703, GS33712Cylinder Head Bolts, Fuel Injector Supply Tubes, Fuel Rail Supply Tube Not Included
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged HS54886A
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS54886A
Includes Valve Stem Seals
Fuel Injector Supply Tubes IncludedFuel Rail Supply Tube Not IncludedUse with GS33712
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 HS54591B
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EVG4
🇺🇸 US 🇨🇦 CA
Head Gaskets and Head Bolts Must be Ordered Separately
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 HS26302PT
🇺🇸 US 🇨🇦 CA
Head Bolts Not IncludedHead Bolt Replacement Recommended
Fitment notes — ULTRA-POWER HS26302PT
Head Bolts Not IncludedHead Bolt Replacement RecommendedIncludes Molded Rubber Valve Cover Gasket(s), Premium Valve Stem Seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Spacer Shim

Brand Part Number Markets Notes Buy
SBI Fits: 6.8L V10 2302179L
🇺🇸 US 🇨🇦 CA
LeftNew Height - 5.310 - 5.312
View on
Amazon
SBI Fits: 6.8L V10 2302179R
🇺🇸 US 🇨🇦 CA
RightNew Height - 5.310 - 5.312
View on
Amazon

This table covers the Cylinder Head Spacer shims.

Cylinder Head Temperature Sensor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 6.8L V10 TS605
🇺🇸 US 🇨🇦 CA
Connector Shape: SquareSender
View on
Amazon

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring.

Engine Block Heater

Brand Part Number Markets Notes Buy
KAT'S HEATERS Fits: 6.7L V8 DIESEL Turbocharged 30513
🇺🇸 US 🇨🇦 CA
Freeze Plug Heater
Fitment notes — KAT'S HEATERS 30513
Freeze Plug Heater
27mm1000 WattsRemovable PlugEasiest Mounting Location: Left RearThreaded
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.7L V8 DIESEL Turbocharged EBH302
🇺🇸 US 🇨🇦 CA
Block Heater
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Exhaust Valve

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged 2114524
🇺🇸 US 🇨🇦 CA
1.195 IN Head Diameter0.2748 IN Stem Diameter
Fitment notes — MAHLE / CLEVITE 2114524
1.195 IN Head Diameter0.2748 IN Stem Diameter113.20mm Length3 Lock Groove Valve
View on
Amazon
QUALCAST Fits: 6.7L V8 DIESEL Turbocharged 10VKFOR67A5
🇺🇸 US 🇨🇦 CA
Intake and Exhaust Valve Kit
Fitment notes — QUALCAST 10VKFOR67A5
Intake and Exhaust Valve Kit
Kit For Assembly with 32 Valves, Springs, Stem Seals, Retainers, 64 Keepers
View on
Amazon
SBI Fits: 6.7L V8 DIESEL Turbocharged 13266
🇺🇸 US 🇨🇦 CA
Superalloy
View on
Amazon
SBI Fits: 6.8L V10 02119
🇺🇸 US 🇨🇦 CA
SuperalloyIncludes " Flex-Fuel "
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Harmonic Balancer

Brand Part Number Markets Notes Buy
DAYCO Fits: 6.7L V8 DIESEL Turbocharged PB1645N
🇺🇸 US 🇨🇦 CA
Premium
View on
Amazon
DAYCO Fits: 6.8L V10 PB1723N
🇺🇸 US 🇨🇦 CA
Premium
View on
Amazon
DORMAN Fits: 6.8L V10 594584
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Bolt

Brand Part Number Markets Notes Buy
CLOYES Fits: 6.8L V10 TMB002
🇺🇸 US 🇨🇦 CA
Engine Harmonic Balancer Bolt
View on
Amazon
DORMAN Fits: 6.8L V10 926886
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 MS96687
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO MS96687
Set
Lower
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged MS19881
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE MS19881
SetMolded Rubber
Upper
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 MS19433
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE MS19433
SetMolded RubberIncludes Water Crossover Gaskets
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged GSKI3
🇺🇸 US 🇨🇦 CA
Long Block Installation Set
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 MS96687
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — ULTRA-POWER MS96687
Set
Lower
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 13265
🇺🇸 US 🇨🇦 CA
View on
Amazon
SBI Fits: 6.8L V10 02118
🇺🇸 US 🇨🇦 CA
Includes "Flex-Fuel" (Uses Two Intake Valves Per Cylinder)
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil

Summary: Notes list SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE and MOTORCRAFT.

Full Synthetic

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909772
🇺🇸 US
Heavy Duty Full Synthetic SAE 15W-40 DIESEL1 Gallon
Fitment notes — VALVOLINE 909772
Heavy Duty Full Synthetic SAE 15W-40 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon

Heavy Duty / Diesel

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular Fits: 6.7L V8 DIESEL Turbocharged XO10W30QSDF
🇺🇸 US 🇨🇦 CA
Super Duty DieselSAE 10W-30
Fitment notes — MOTORCRAFT XO10W30QSDF
Super Duty DieselSAE 10W-301 Quart
Ambient Temperature Rating: Above 0 Degrees (F) / -18 Degrees (C)
View on
Amazon
MOTORCRAFT Popular Fits: 6.7L V8 DIESEL Turbocharged XO10W305Q3SD
🇺🇸 US 🇨🇦 CA
Super Duty DieselSAE 10W-30
Fitment notes — MOTORCRAFT XO10W305Q3SD
Super Duty DieselSAE 10W-305 Quart
Ambient Temperature Rating: Above 0 Degrees (F) / -18 Degrees (C)
View on
Amazon
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909778
🇺🇸 US
Heavy Duty Conventional SAE 15W-40 DIESEL1 Gallon
Fitment notes — VALVOLINE 909778
Heavy Duty Conventional SAE 15W-40 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon

Synthetic Blend

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909766
🇺🇸 US
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL1 Gallon
Fitment notes — VALVOLINE 909766
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909776
🇺🇸 US
Heavy Duty Synthetic Blend SAE 10W-30 DIESEL1 Gallon
Fitment notes — VALVOLINE 909776
Heavy Duty Synthetic Blend SAE 10W-30 DIESEL1 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon
VALVOLINE Fits: 6.7L V8 DIESEL Turbocharged 909782
🇺🇸 US
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL2.5 Gallon
Fitment notes — VALVOLINE 909782
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL2.5 Gallon
Fits:
300
or:
270
or:
330
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler

Brand Part Number Markets Notes Buy
AUTOTECNICA Fits: 6.8L V10 FD1423679
🇺🇸 US 🇨🇦 CA
Includes Gasket and Bolt
View on
Amazon
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 904381
🇺🇸 US 🇨🇦 CA
View on
Amazon
DORMAN Fits: 6.8L V10 918431
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOTORCRAFT Fits: 6.8L V10 YOC30
🇺🇸 US 🇨🇦 CA
for Coolant Hoses To Oil Cooler
View on
Amazon
SKP Fits: 6.7L V8 DIESEL Turbocharged SK904381
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.8L V10 OCK22
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Cooler Mounting Kit

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged GS33684
🇺🇸 US 🇨🇦 CA
Engine Oil Cooler Gasket SetMolded Rubber
Fitment notes — MAHLE / CLEVITE GS33684
Engine Oil Cooler Gasket SetMolded Rubber
Lower Oil Pan Gasket not IncludedUse with #(s) OS32434 or OS32438
View on
Amazon

This table covers the Oil Cooler Mounting kits.

Oil Cooler Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.8L V10 B33281
🇺🇸 US 🇨🇦 CA
Engine Oil Cooler SealMolded Rubber
Fitment notes — MAHLE / CLEVITE B33281
Engine Oil Cooler SealMolded Rubber
Oil Cooler Mounting Seal
View on
Amazon

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Dipstick / Tube

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EDPS44
🇺🇸 US 🇨🇦 CA
Engine Oil DipstickDipstick Only
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EDPST33
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
View on
Amazon
MOTORCRAFT Fits: 6.8L V10 EDPS20
🇺🇸 US 🇨🇦 CA
Engine Oil DipstickDipstick Only
View on
Amazon
MOTORCRAFT Fits: 6.8L V10 EDPST10
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
View on
Amazon

This table covers the Oil Dipstick tubes.

Oil Drain Plug

Brand Part Number Markets Notes Buy
AGS Popular Fits: all 2016 F-750 engines ODP00007
🇺🇸 US 🇨🇦 CA
M14x1.50
View on
Amazon
DORMAN Popular Fits: all 2016 F-750 engines 090053
🇺🇸 US 🇨🇦 CA
MetalPilot Point
Fitment notes — DORMAN 090053
MetalPilot PointM14-1.50Head Size 16MM
M14 x 1.50 Thread
View on
Amazon
AGS Fits: all 2016 F-750 engines ODP00012
🇺🇸 US 🇨🇦 CA
M16x1.50
View on
Amazon
DORMAN Fits: all 2016 F-750 engines 090161
🇺🇸 US 🇨🇦 CA
MetalPilot Point
Fitment notes — DORMAN 090161
MetalPilot PointM14-1.5Head Size 16MM
View on
Amazon
DORMAN Fits: all 2016 F-750 engines 092020
🇺🇸 US 🇨🇦 CA
Thread Size: M14-1.50Twist Style
View on
Amazon
SKP Fits: all 2016 F-750 engines SK090053CD
🇺🇸 US 🇨🇦 CA
Metal
Fitment notes — SKP SK090053CD
Metal
16 mm HeadThread Pitch: 1.5 mm
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 72515
🇺🇸 US 🇨🇦 CA
0.560 (in) Inside Diameter x 0.845 (in) Outside DiameterFlat Washer
Fitment notes — FEL-PRO 72515
0.560 (in) Inside Diameter x 0.845 (in) Outside DiameterFlat WasherPlastic
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 72112
🇺🇸 US 🇨🇦 CA
Nitrile
Fitment notes — MAHLE / CLEVITE 72112
Nitrile
O-Ring Type
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged EC802
🇺🇸 US 🇨🇦 CA
Cap Assy - Oil Filter
View on
Amazon
MOTORCRAFT Fits: 6.8L V10 EC789
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filler Tube

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.8L V10 917415
🇺🇸 US 🇨🇦 CA
View on
Amazon
SKP Fits: 6.8L V10 SK917415
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 917415
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Filler tubes.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
ULTRA-POWER Fits: 6.7L V8 DIESEL Turbocharged 57151
🇺🇸 US 🇨🇦 CA
OE # FL2051S
View on
Amazon
VARIOUS MFR Fits: 6.7L V8 DIESEL Turbocharged PG6128
🇺🇸 US 🇨🇦 CA
View on
Amazon
VARIOUS MFR Fits: 6.8L V10 PG4651
🇺🇸 US 🇨🇦 CA
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Fits: 6.7L V8 DIESEL Turbocharged M1405A
🇺🇸 US 🇨🇦 CA
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular Fits: 6.7L V8 DIESEL Turbocharged FL2124S
🇺🇸 US 🇨🇦 CA
Oil Cooler and FilterSilicone
View on
Amazon
MOTORCRAFT Popular Fits: 6.8L V10 FL820S
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX Popular Fits: 6.7L V8 DIESEL Turbocharged 57151
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX Popular Fits: 6.8L V10 51372
🇺🇸 US 🇨🇦 CA
Part may be slightly shorter than OE old design due to product update.
View on
Amazon
DONALDSON Fits: 6.7L V8 DIESEL Turbocharged P502503
🇺🇸 US 🇨🇦 CA
Lube filter, Spin-On full flowMedia Type: Synthetic
Fitment notes — DONALDSON P502503
Lube filter, Spin-On full flowMedia Type: Synthetic
Engine Oil Filter
View on
Amazon
FRAM Fits: 6.7L V8 DIESEL Turbocharged PH10890
🇺🇸 US 🇨🇦 CA
Extra Guard
View on
Amazon
HASTINGS / BALDWIN Fits: 6.7L V8 DIESEL Turbocharged LF651
🇺🇸 US 🇨🇦 CA
View on
Amazon
HASTINGS / BALDWIN Fits: 6.8L V10 LF110
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged OC1662
🇺🇸 US 🇨🇦 CA
Spin-On
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged FL2124SW
🇺🇸 US 🇨🇦 CA
Oil Cooler and FilterSilicone
View on
Amazon
MOTORCRAFT Fits: 6.8L V10 FL2122
🇺🇸 US 🇨🇦 CA
View on
Amazon
VARIOUS MFR Fits: 6.8L V10 PG4651EX
🇺🇸 US 🇨🇦 CA
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter Gasket / O-Ring

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 70801
🇺🇸 US 🇨🇦 CA
Rigid carrier design
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged B32580
🇺🇸 US 🇨🇦 CA
Oil Filter Adapter GasketMolded Rubber
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 B31584
🇺🇸 US 🇨🇦 CA
Oil Filter Adapter GasketMolded Rubber
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 B33394
🇺🇸 US 🇨🇦 CA
Oil Filter Adapter Gasket
Fitment notes — MAHLE / CLEVITE B33394
Oil Filter Adapter Gasket
Aluminum Carrier
View on
Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Pan

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 264452
🇺🇸 US 🇨🇦 CA
Lower
View on
Amazon
DORMAN Fits: 6.8L V10 264447
🇺🇸 US 🇨🇦 CA
View on
Amazon
SKP Fits: 6.7L V8 DIESEL Turbocharged SK264452
🇺🇸 US 🇨🇦 CA
Includes Drain Plug
Fitment notes — SKP SK264452
Includes Drain Plug
Lower
View on
Amazon
SKP Fits: 6.7L V8 DIESEL Turbocharged SK103494
🇺🇸 US 🇨🇦 CA
Upperwith Grooves
Fitment notes — SKP SK103494
Upperwith Grooveswithout Gaskets & Seals
View on
Amazon
SKP Fits: 6.8L V10 SK264447
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 264447
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 OS30710R
🇺🇸 US 🇨🇦 CA
Permadry Molded Rubber
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged OS32438
🇺🇸 US 🇨🇦 CA
Beaded Paper
Fitment notes — MAHLE / CLEVITE OS32438
Beaded Paper
Lowerwith Steel Oil Pan
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged OS32478
🇺🇸 US 🇨🇦 CA
Includes Oil Cooler GasketsMolded Rubber
Fitment notes — MAHLE / CLEVITE OS32478
Includes Oil Cooler GasketsMolded Rubber
Upper
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 OS32222
🇺🇸 US 🇨🇦 CA
Molded Rubber
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 OS30710R
🇺🇸 US 🇨🇦 CA
SetMolded Rubber Gasket(s) Included
Fitment notes — ULTRA-POWER OS30710R
SetMolded Rubber Gasket(s) IncludedMolded Rubber
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Piston Ring

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged S42168
🇺🇸 US 🇨🇦 CA
PremiumMaterial Carbon Steel / Ductile Iron / Stainless Steel
Fitment notes — MAHLE / CLEVITE S42168
PremiumMaterial Carbon Steel / Ductile Iron / Stainless SteelSingle Cylinder SetAxial Height: 3.0mm / 2.0mm / 2.5mmFacing: Plasma-Moly / Gas Nitride
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged 42168
🇺🇸 US 🇨🇦 CA
PremiumMaterial Carbon Steel / Ductile Iron / Carbon Steel
Fitment notes — MAHLE / CLEVITE 42168
PremiumMaterial Carbon Steel / Ductile Iron / Carbon SteelSetAxial Height: 3.0mm / 2.0mm / 2.5mmFacing: Plasma-Moly / Gas Nitride
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 41788
🇺🇸 US 🇨🇦 CA
PremiumMaterial Carbon Steel / Carbon Steel / Stainless Steel
Fitment notes — MAHLE / CLEVITE 41788
PremiumMaterial Carbon Steel / Carbon Steel / Stainless SteelSetAxial Height: 1.5MM / 1.5MM / 3.0MMFacing: Plasma-Moly / Chrome
Shallow Groove
View on
Amazon
SEALED POWER Fits: 6.7L V8 DIESEL Turbocharged E1003K
🇺🇸 US 🇨🇦 CA
PremiumRing Groove Widths: 3.0mm, 2.0mm, 2.5mm
Fitment notes — SEALED POWER E1003K
PremiumRing Groove Widths: 3.0mm, 2.0mm, 2.5mmSetMoly Steel Top RingDuctile Second Ring
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1901553
🇺🇸 US 🇨🇦 CA
Intake and Exhaust9.530 Length
Fitment notes — SBI 1901553
Intake and Exhaust9.530 Length312X060 Diameter/Wall
View on
Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Rocker Arm

Brand Part Number Markets Notes Buy
SBI Fits: 6.8L V10 1801330
🇺🇸 US 🇨🇦 CA
Intake and ExhaustRoller cam follower
View on
Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Thrust Washer

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 6.7L V8 DIESEL Turbocharged TW3000AM
🇺🇸 US 🇨🇦 CA
Bimetal (Aluminum Base)
View on
Amazon

This table covers the Thrust washers.

Timing Belt Tensioner

Brand Part Number Markets Notes Buy
ULTRA-POWER Fits: 6.8L V10 420123
🇺🇸 US 🇨🇦 CA
Timing ChainKit (Includes Left and Right)
View on
Amazon

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Chain

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.8L V10 TCRK7
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain Guide / Damper

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.8L V10 TCRK17
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon

This table covers the guides and dampers that keep the timing chain on its path.

Timing Chain Tensioner

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.8L V10 420123
🇺🇸 US 🇨🇦 CA
Kit (Includes Left and Right)
View on
Amazon
SKP Fits: 6.8L V10 SK420123
🇺🇸 US 🇨🇦 CA
Plastic
Fitment notes — SKP SK420123
Plastic
Kit (Includes Left and Right)
View on
Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Chain Tensioner Gasket / Seal

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 ES73226
🇺🇸 US 🇨🇦 CA
Tensioner Seals and Tensioner Clips Included
Fitment notes — FEL-PRO ES73226
Tensioner Seals and Tensioner Clips Included
Must be used with OEM Replacement Timing Chain Tensioner
View on
Amazon

This table covers the seals at the Timing Chain Tensioner Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 TCS46067
🇺🇸 US 🇨🇦 CA
Repair Sleeve Not Included
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged JV5191
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — MAHLE / CLEVITE JV5191
Set
Lower Oil Pan Gasket Not Included
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 JV5051
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — MAHLE / CLEVITE JV5051
Set
VCT Solenoid Housing Gaskets Not IncludedUse with B32252 and B32253
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 TCS46067
🇺🇸 US 🇨🇦 CA
Repair Sleeve Not Included
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Repair Sleeve

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 16207
🇺🇸 US 🇨🇦 CA
Use with Installation Tool
View on
Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged 67965
🇺🇸 US 🇨🇦 CA
PTFE (Polytetrafluoroethylene)Includes Oil Slinger
Fitment notes — MAHLE / CLEVITE 67965
PTFE (Polytetrafluoroethylene)Includes Oil SlingerFront
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Turbocharger

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged HC3Z6587A
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged TC28
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged FC4Z6K682B
🇺🇸 US 🇨🇦 CA
View on
Amazon
ROTOMASTER Fits: 6.7L V8 DIESEL Turbocharged A1350149N
🇺🇸 US 🇨🇦 CA
with Mounting Pedestalwithout Actuator
View on
Amazon

This table covers the turbochargers that compress intake air.

Turbocharger Coolant Line

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 667431
🇺🇸 US 🇨🇦 CA
Return
View on
Amazon
GPD Fits: 6.7L V8 DIESEL Turbocharged 2571002
🇺🇸 US 🇨🇦 CA
with Mounting Hole On RightReturn Line
View on
Amazon

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged F33386
🇺🇸 US 🇨🇦 CA
Beaded Steel
Fitment notes — MAHLE / CLEVITE F33386
Beaded Steel
Turbocharger Mounting Gasket
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged B33487
🇺🇸 US 🇨🇦 CA
Steel
Fitment notes — MAHLE / CLEVITE B33487
Steel
3.5 IN Turbocharger V-Band Clamp
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged B33485
🇺🇸 US 🇨🇦 CA
Steel
Fitment notes — MAHLE / CLEVITE B33485
Steel
2.5 IN Turbocharger V-Band Clamp
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged GS33789
🇺🇸 US 🇨🇦 CA
Includes Turbocharger V-Band ClampsSet
Fitment notes — MAHLE / CLEVITE GS33789
Includes Turbocharger V-Band ClampsSetTurbocharger Mounting Gasket Mounting Gasket Set
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Mounting Hardware

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged PTC9
🇺🇸 US 🇨🇦 CA
Service Turbo without Oil Tube - Will Use HC3Z-9T514-A Kit. This Includes 6 Hole Gasket & Filter.
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged PTC10
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the fasteners that mount the turbocharger.

Turbocharger Oil Filter

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 667656
🇺🇸 US 🇨🇦 CA
Boost Pressure Solenoid Filter
View on
Amazon

This table covers the Turbocharger Oil filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged OSL20
🇺🇸 US 🇨🇦 CA
Tube - Oil FeedSupply Line
View on
Amazon
MOTORCRAFT Fits: 6.7L V8 DIESEL Turbocharged OSL16
🇺🇸 US 🇨🇦 CA
Tube - Oil FeedFrom Oil Filter adapter to Air Compressor
Fitment notes — MOTORCRAFT OSL16
Tube - Oil FeedFrom Oil Filter adapter to Air CompressorSupply Line
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Turbocharger Wastegate Solenoid / Actuator

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 667012
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 6.7L V8 DIESEL Turbocharged 263201
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
MAHLE / CLEVITE Popular Fits: 6.7L V8 DIESEL Turbocharged VS50658
🇺🇸 US 🇨🇦 CA
Beaded Steel
Fitment notes — MAHLE / CLEVITE VS50658
Beaded Steel
Fuel Rail Supply Tube not IncludedUse with #(s) GS33712
View on
Amazon
DORMAN Fits: 6.7L V8 DIESEL Turbocharged 263200
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged VS50852
🇺🇸 US 🇨🇦 CA
Beaded Steel
Fitment notes — MAHLE / CLEVITE VS50852
Beaded Steel
Fuel Injector Supply Tubes, Fuel Rail Supply Tube Not IncludedUse with #(s) GS33703, GS33712
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged VS50658SL
🇺🇸 US 🇨🇦 CA
Beaded Steel
Fitment notes — MAHLE / CLEVITE VS50658SL
Beaded Steel
LeftFuel Rail Supply Tube not IncludedUse with #(s) GS33712
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged VS50658SR
🇺🇸 US 🇨🇦 CA
Beaded Steel
Fitment notes — MAHLE / CLEVITE VS50658SR
Beaded Steel
RightFuel Rail Supply Tube not IncludedUse with #(s) GS33712
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 VS50739
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS50739
SetMolded RubberIncludes Valve Cover Grommets
View on
Amazon
ULTRA-POWER Fits: 6.8L V10 VS50656R
🇺🇸 US 🇨🇦 CA
SetIncludes Molded Rubber Gasket(s), Valve Cover Grommets
Fitment notes — ULTRA-POWER VS50656R
SetIncludes Molded Rubber Gasket(s), Valve Cover GrommetsMolded Rubber
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Guide

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1403163
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2764 I.D.
Fitment notes — SBI 1403163
Intake and Exhaust0.2764 I.D.0.4725 O.D.2.150 Length1-P Type
View on
Amazon
SBI Fits: 6.8L V10 1403047
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2371 I.D.
Fitment notes — SBI 1403047
Intake and Exhaust0.2371 I.D.0.4360 O.D.1.725 Length1-P Type
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Brand Part Number Markets Notes Buy
SBI Fits: 6.8L V10 VL180
🇺🇸 US 🇨🇦 CA
Hydraulic Lash Adjuster Type
Fitment notes — SBI VL180
Hydraulic Lash Adjuster Type
Intake and Exhaust0.630 Body Diameter1.960 Lengthwith Undercut Groove On Boss
View on
Amazon
SEALED POWER Fits: 6.8L V10 HT2271
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Seat

Brand Part Number Markets Notes Buy
DURA-BOND Popular Fits: 6.8L V10 31244
🇺🇸 US 🇨🇦 CA
Exhaust
View on
Amazon
QUALCAST Fits: 6.8L V10 21137550
🇺🇸 US 🇨🇦 CA
INSERT
Fitment notes — QUALCAST 21137550
INSERT
Intake1.109T I.D. 1-3/8 O.D. 0.255 Depth. Exc. CNG
View on
Amazon
SBI Fits: 6.8L V10 SB150073
🇺🇸 US 🇨🇦 CA
High ChromeFor Aluminum Cylinder Head
Fitment notes — SBI SB150073
High ChromeFor Aluminum Cylinder Head
Exhaust1-1/2 O.D.1.230 I.D.0.2780 Depth
View on
Amazon
SBI Fits: 6.8L V10 SB137550
🇺🇸 US 🇨🇦 CA
High ChromeFor Aluminum Cylinder Head
Fitment notes — SBI SB137550
High ChromeFor Aluminum Cylinder Head
Intake1-3/8 O.D.1.109T I.D.0.2550 Depth
View on
Amazon
SBI Fits: 6.8L V10 SB150073N
🇺🇸 US 🇨🇦 CA
Non-MagneticStar Series Super Premium Nickel
Fitment notes — SBI SB150073N
Non-MagneticStar Series Super Premium NickelFor Aluminum Cylinder Head
Exhaust1-1/2 O.D.1.230 I.D.0.2780 DepthCNG
View on
Amazon

This table covers the Valve seats.

Valve Spring

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1601616
🇺🇸 US 🇨🇦 CA
Intake and Exhaust1.979 Length
Fitment notes — SBI 1601616
Intake and Exhaust1.979 Length1.020T O.D.0.714T I.DConical
View on
Amazon
SBI Fits: 6.8L V10 1601485
🇺🇸 US 🇨🇦 CA
Intake and Exhaust2.150 Length
Fitment notes — SBI 1601485
Intake and Exhaust2.150 Length1.034T O.D.0.708T I.DConical
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1611080
🇺🇸 US 🇨🇦 CA
Retainer Description
View on
Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
SBI Fits: 6.7L V8 DIESEL Turbocharged 1211084
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2900 Length
Fitment notes — SBI 1211084
Intake and Exhaust0.2900 Length3 Round bead type0.2180 I.D.
View on
Amazon
SBI Fits: 6.8L V10 1211082
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2750 Length
Fitment notes — SBI 1211082
Intake and Exhaust0.2750 Length3 Round bead type0.1800 I.D.
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 SS72921
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO SS72921
Set
Intake and Exhaust
View on
Amazon
MAHLE / CLEVITE Fits: 6.7L V8 DIESEL Turbocharged SS46062
🇺🇸 US 🇨🇦 CA
FluoroelastomerContains 32 PCS
Fitment notes — MAHLE / CLEVITE SS46062
FluoroelastomerContains 32 PCS
Intake and ExhaustPositive Type
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 SS45944A
🇺🇸 US 🇨🇦 CA
FluoroelastomerContains 10 PCS
Fitment notes — MAHLE / CLEVITE SS45944A
FluoroelastomerContains 10 PCS
Intake and ExhaustPositive Type
View on
Amazon
SBI Fits: 6.7L V8 DIESEL Turbocharged 1221441
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221441
Intake and ExhaustViton MaterialPositive TypeTop Hat Style7 mm Nominal Stem Diameter
View on
Amazon
SBI Fits: 6.8L V10 1221356
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221356
Intake and ExhaustViton MaterialPositive TypeTop Hat Style6 mm Nominal Stem Diameter
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.8L V10 ES73075
🇺🇸 US 🇨🇦 CA
Kit
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 B32252
🇺🇸 US 🇨🇦 CA
Rubber Coated Beaded Steel
Fitment notes — MAHLE / CLEVITE B32252
Rubber Coated Beaded Steel
LeftVariable Camshaft Timing Camshaft Housing Gasket
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 B32253
🇺🇸 US 🇨🇦 CA
Rubber Coated Beaded Steel
Fitment notes — MAHLE / CLEVITE B32253
Rubber Coated Beaded Steel
RightVariable Camshaft Timing Camshaft Housing Gasket
View on
Amazon
MAHLE / CLEVITE Fits: 6.8L V10 GS33717
🇺🇸 US 🇨🇦 CA
Beaded Paper
Fitment notes — MAHLE / CLEVITE GS33717
Beaded Paper
VCT Camshaft Housing Gasket Set
View on
Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2016 Ford F-750

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Cylinder Head .

Frequently Asked Questions

How many engine parts fit the 2016 Ford F-750?

Our catalog currently lists 196 engine parts for the 2016 Ford F-750 across 58 subcategories and 28 brands, covering both the 6.7L V8 DIESEL Turbocharged and the 6.8L V10. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2016 Ford F-750 engines?

Some do. 6 parts fit every engine; the other 190 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2016 Ford F-750?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2016 Ford F-750?

Oil rows on this page include SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Ford F-750 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Ford F-750?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Ford F-750

Engine Parts for Other Ford F-750 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.