2016 Ford Flex Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2016 Ford Flex come from 3 brands — NATIONAL, SKF and WJB / INMOTION PARTS. Every part fits both the 3.5L V6 and the 3.5L V6 Turbocharged.

Listed part numbers: NATIONAL 710969, SKF 13622A and WJB / INMOTION PARTS WS710969.

This table covers the Axle Shaft tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 2016 Ford Flex — DORMAN 600229.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

31 CV Axle parts for the 2016 Ford Flex come from 6 brands — TRAKMOTIVE, GSP, TOP NOTCH and 3 other brands. The "Popular" part is APWI FD8413. A list this long means CV Axle applications vary by configuration — the notes carry the qualifiers.

This table covers the brackets that mount the CV Axle Support Bearing. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2016 Ford Flex — MOTORCRAFT CVB3.

This table covers the CV Intermediate shafts. Read more

One part is listed for the 2016 Ford Flex — TRAKMOTIVE FD3517.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2016 Ford Flex come from 2 brands — MEVOTECH and MOTORCRAFT. 2 parts fit every engine; the other 2 are engine-specific.

This group includes MEVOTECH DX251, MEVOTECH DX787 and MEVOTECH DX550 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts for the 2016 Ford Flex come from 2 brands — NSK and SKF. Every part fits both the 3.5L V6 and the 3.5L V6 Turbocharged.

This group includes NSK R6044 and SKF JLM506849.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

3 Differential Pinion Repair Sleeve parts for the 2016 Ford Flex come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.5L V6 and the 3.5L V6 Turbocharged.

Listed part numbers: BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Pinion Seal parts for the 2016 Ford Flex come from 3 brands — NATIONAL, TIMKEN and WJB / INMOTION PARTS. Every part fits both the 3.5L V6 and the 3.5L V6 Turbocharged.

Part numbers include NATIONAL 711010, TIMKEN SL260556 and WJB / INMOTION PARTS WS711010.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts are listed for the 2016 Ford Flex, from DORMAN and WJB / INMOTION PARTS. All of them fit every engine offered in the 2016 Flex.

Listed part numbers: DORMAN 936848 and WJB / INMOTION PARTS WDS36848.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

7 Gear Oil parts for the 2016 Ford Flex come from 2 brands — VALVOLINE and MOBIL. The "Popular" part is MOBIL 104361. 1 part fits every engine; the other 6 are engine-specific.

This group includes MOBIL 104361, VALVOLINE VV975 and VALVOLINE VV820 and the remaining parts above.

This table covers the Power Take Off (PTO) assemblies. Read more

This group shows a single part: DORMAN 600238.

This table covers the Transfer Case assemblies. Read more

This group shows a single part: VAICO V252274.

This table covers the Transfer Case control modules. Read more

One part is listed for the 2016 Ford Flex — MOTORCRAFT TM259.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

5 Transfer Case Fluid parts for the 2016 Ford Flex come from 2 brands — VALVOLINE and MOBIL. The "Popular" part is VALVOLINE VV982. 1 part fits every engine; the other 4 are engine-specific.

Part numbers include VALVOLINE VV982, MOBIL 102490 and VALVOLINE 889787, among others listed above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2016 Ford Flex — NATIONAL 711140.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2016 Ford Flex come from 2 brands — NATIONAL and SCHAEFFLER. Every part fits both the 3.5L V6 and the 3.5L V6 Turbocharged.

Part numbers include NATIONAL 711139 and SCHAEFFLER SS2863.