2016 Ford Focus Engine Parts

This table covers the chains that drive the balance shafts. Read more

One part is listed for the 2016 Ford Focus — INA ZCC1120.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: INA ZT91247.

This table covers the Balance Shaft sprockets. Read more

One part is listed for the 2016 Ford Focus — INA ZSS1399.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 153740.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2016 Ford Focus, from MAHLE / CLEVITE and ITM ENGINE COMPONENTS.

In the High Performance grade, MAHLE / CLEVITE supplies 2 parts: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1925HX.

The Standard Replacement section lists 2 options from ITM ENGINE COMPONENTS and MAHLE / CLEVITE — built to original-equipment specification. ITM ENGINE COMPONENTS 4B9408 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: MAHLE / CLEVITE CB1925HX, MAHLE / CLEVITE CB1925H and ITM ENGINE COMPONENTS 4B9408, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Conversion / Lower Gasket Set parts are listed for the 2016 Ford Focus, from AJUSA, ELRING, MAHLE / CLEVITE and 5 other brands. APEX ACS4080 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2016 Ford Focus come from 2 brands — ENGINETECH and MAHLE / CLEVITE.

Part numbers include ENGINETECH BC116J and MAHLE / CLEVITE MS2245A.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 2016 Ford Focus come from 4 brands — NATIONAL, BCA, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is NATIONAL 99145. 1 part fits every engine; the other 6 are engine-specific.

Listed part numbers: NATIONAL 99145, BCA NS99145 and BCA NS99215, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

26 Crankshaft Seal parts for the 2016 Ford Focus come from 12 brands — AJUSA, TIMKEN, WJB / INMOTION PARTS and 9 other brands. The "Popular" part is AJUSA 15088800. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the Crankshaft Seal covers. Read more

One part is listed for the 2016 Ford Focus — DORMAN 635557.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts are listed for the 2016 Ford Focus, from AJUSA, ELRING, MAHLE / CLEVITE and 3 other brands. FEL-PRO ES72207 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

22 Cylinder Head Gasket parts are listed for the 2016 Ford Focus, from APEX, MAHLE / CLEVITE, AJUSA and 4 other brands. APEX AHG1344 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

20 Cylinder Head Gasket Set parts are listed for the 2016 Ford Focus, from FEL-PRO, AJUSA, ELRING and 3 other brands. APEX AHS13033 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2016 Ford Focus — SBI 2302144.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

8 Cylinder Head Temperature Sensor parts for the 2016 Ford Focus come from 4 brands — WELLS, DORMAN, NTK and 1 other brand.

This group includes DORMAN 926709, DORMAN 926711 and NTK EJ0011 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts for the 2016 Ford Focus come from 2 brands — KAT'S HEATERS and MOTORAD.

Listed part numbers: KAT'S HEATERS 11409, KAT'S HEATERS 11490 and MOTORAD TA9057.

This table covers the Engine covers. Read more

11 Engine Cover parts are listed for the 2016 Ford Focus, from TECHPRO and VARIOUS MFR. TECHPRO FO1228139 carries the "Popular" badge.

This table covers the Engine Cover grommets. Read more

This group shows a single part: DORMAN 49931.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 2016 Ford Focus, from AJUSA and ELRING.

Part numbers include AJUSA 50378800, AJUSA 50408900 and AJUSA 50552600, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2016 Ford Focus come from 3 brands — MELLING, SBI and SKP.

Part numbers include MELLING V2005, MELLING V3482S and MELLING V5823, among others listed above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

4 Fuel Pump Camshaft Follower parts are listed for the 2016 Ford Focus, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS GDF202, STANDARD MOTOR PRODUCTS GDF201 and WELLS 5T5016 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2016 Ford Focus, from ATP, DORMAN and PIONEER.

Listed part numbers: ATP 102425, ATP 102286 and DORMAN 594821, plus the other parts above.

This table covers the Harmonic Balancer bolts. Read more

3 Harmonic Balancer Bolt parts for the 2016 Ford Focus come from 3 brands — DORMAN, SKP and ULTRA-POWER.

This group includes DORMAN 926885 and SKP SK926885 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

5 Intake Manifold parts for the 2016 Ford Focus come from 3 brands — LARES, VAICO and AUTOTECNICA.

This group includes AUTOTECNICA FD1419316, LARES 33335 and LARES 33340 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Intake Manifold Gasket parts are listed for the 2016 Ford Focus, from AJUSA, VICTOR REINZ, FEL-PRO and 4 other brands. FEL-PRO MS97324 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 770330.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2016 Ford Focus come from 4 brands — SBI, MELLING, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: MAHLE / CLEVITE 2114544, MELLING V2006 and MELLING V5824, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

27 Motor Mount parts for the 2016 Ford Focus come from 7 brands — DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 4 other brands. The "Popular" part is SKP SKMA5631. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 1 other brand.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Motor Mount Bushing parts for the 2016 Ford Focus come from 2 brands — DEA / MARMON RIDE CONTROL and SKP.

This group includes DEA / MARMON RIDE CONTROL A5312, DEA / MARMON RIDE CONTROL A5661 and SKP SKMA5661.

This table covers the Motor Mount inserts. Read more

One part is listed for the 2016 Ford Focus — SKP SKM3103.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 2016 Ford Focus come from ANCHOR.

Listed part numbers: ANCHOR 300348, ANCHOR 300202 and ANCHOR 300867, plus the other parts above.