2016 Ford Lobo Steering Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2016 Ford Lobo has 11 steering parts with verified fitment on this page — 4 part types and 4 brands, covering both the 3.5L V6 Turbocharged and the 5.0L V8. Each part includes a manufacturer part number and application notes.

The steering system on the 2016 Ford Lobo connects driver to road through the rack, pump, tie rods, and column components. The largest groups are Tie Rod End (6 parts), Knuckle (2 parts) and Steering Shaft (2 parts). The other 1 part type covers the remaining 1 part.

Knuckle

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2016 Lobo engines 686407
🇲🇽 MX
OE FIX
Fitment notes — DORMAN 686407
OE FIX
Front Left4WD
View on
Amazon
DORMAN Fits: all 2016 Lobo engines 686406
🇲🇽 MX
OE FIX
Fitment notes — DORMAN 686406
OE FIX
Front Right4WD
View on
Amazon

This table covers the steering knuckles that carry the hub, caliper and ball joints.

Rack and Pinion Belt Kit

Brand Part Number Markets Notes Buy
EDELMANN Fits: all 2016 Lobo engines 9608
🇲🇽 MX
Electronic Rack and Pinion Belt Repair Kit
Fitment notes — EDELMANN 9608
Electronic Rack and Pinion Belt Repair Kit
No flash programming required
View on
Amazon

This table covers the Rack and Pinion Belt kits.

Steering Shaft

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2016 Lobo engines 425331
🇲🇽 MX
Lower
View on
Amazon
SKP Fits: all 2016 Lobo engines SK425331
🇲🇽 MX
Lower
View on
Amazon

This table covers the Steering shafts.

Tie Rod End

Economy

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2016 Lobo engines 543778
🇲🇽 MX
Front Inner
View on
Amazon
DORMAN Fits: all 2016 Lobo engines 544535
🇲🇽 MX
Front Left Outer
View on
Amazon
DORMAN Fits: all 2016 Lobo engines 544536
🇲🇽 MX
Front Right Outer
View on
Amazon
FVP Fits: all 2016 Lobo engines TO85041
🇲🇽 MX
Front Left Outer
View on
Amazon
FVP Fits: all 2016 Lobo engines TO85042
🇲🇽 MX
Front Right Outer
View on
Amazon

Heavy Duty

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2016 Lobo engines TI86080RD
🇲🇽 MX
RD
Fitment notes — DORMAN TI86080RD
RD
Front Inner
View on
Amazon

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.

Buying Steering Parts for a 2016 Ford Lobo

On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.

  • You do not need to pick an engine: every steering part on this page fits both the 3.5L V6 Turbocharged and the 5.0L V8.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Tie Rod End and Knuckle .

Frequently Asked Questions

How many steering parts fit the 2016 Ford Lobo?

Our catalog currently lists 11 steering parts for the 2016 Ford Lobo across 4 subcategories and 4 brands, covering both the 3.5L V6 Turbocharged and the 5.0L V8. Each part is matched to the engine(s) it fits.

Do steering parts differ between 2016 Ford Lobo engines?

No. On this page every steering part fits both the 3.5L V6 Turbocharged and the 5.0L V8. You do not need to pick an engine to choose the right row — use the notes for position and trim.

What are the signs of steering problems on a 2016 Ford Lobo?

Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Ford Lobo was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Ford Lobo?

Every part on this page already fits both the 3.5L V6 Turbocharged and the 5.0L V8. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Ford Lobo

Steering Parts for Other Ford Lobo Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.