2019 Ford Explorer Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 A/C Compressor Clutch Coil Connector parts for the 2019 Ford Explorer come from 3 brands — FOUR SEASONS, MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: FOUR SEASONS 37250, MOTORCRAFT WPT984 and STANDARD MOTOR PRODUCTS S2342.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 A/C Refrigerant Pressure Switch Connector parts are listed for the 2019 Ford Explorer, from DORMAN, MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes DORMAN 645323, MOTORCRAFT WPT1578 and STANDARD MOTOR PRODUCTS S2269.

This table covers the harness connectors at the A/C Refrigerant Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1789.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

10 ABS Wheel Speed Sensor Connector parts for the 2019 Ford Explorer come from 6 brands — STANDARD MOTOR PRODUCTS, DORMAN, MOTORCRAFT and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accelerator Pedal Position Sensor Connector parts for the 2019 Ford Explorer come from 3 brands — DORMAN, MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 645240, MOTORCRAFT WPT1554 and STANDARD MOTOR PRODUCTS S1478.

This table covers the harness connectors at the Accessory Power Outlet. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Accessory Power Outlet Connector parts for the 2019 Ford Explorer come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT WPT982, MOTORCRAFT WPT1544 and MOTORCRAFT WPT1006, plus the other parts above.

This table covers the harness connectors at the Accessory Power Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3068.

This table covers the harness connectors at the Adjustable Pedal Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT977.

This table covers the harness connectors at the Adjustable Pedal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT995.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOTORCRAFT supplies the 3 Air Bag Clockspring Connector parts for the 2019 Ford Explorer.

Listed part numbers: MOTORCRAFT WPT965, MOTORCRAFT WPT949 and MOTORCRAFT WPT1582.

This table covers the harness connectors at the Air Bag. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Air Bag Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS. The "Popular" part is MOTORCRAFT WPT1314.

This group includes MOTORCRAFT WPT1314, STANDARD MOTOR PRODUCTS S2421 and MOTORCRAFT WPT1225 and the remaining parts above.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT965.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Alternator / Generator Connector parts for the 2019 Ford Explorer come from 4 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, DORMAN and 1 other brand. The "Popular" part is UNITED MOTOR PRODUCTS CON175.

Listed part numbers: UNITED MOTOR PRODUCTS CON175, DORMAN 645136 and MOTORCRAFT WPT118, plus the other parts above.

This table covers the harness connectors at the Ambient Air Quality Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — STANDARD MOTOR PRODUCTS S2269.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ambient Air Temperature Sensor Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOTORCRAFT WPT1548 and STANDARD MOTOR PRODUCTS S2495.

This table covers the harness connectors at the Antenna. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Antenna Connector parts are listed for the 2019 Ford Explorer, from MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOTORCRAFT WPT1103 and STANDARD MOTOR PRODUCTS S2535.

This table covers the harness connectors at the Anti-Theft Control Module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOTORCRAFT supplies both parts for the 2019 Ford Explorer.

Listed part numbers: MOTORCRAFT WPT1448 and MOTORCRAFT WPT1139.

This table covers the harness connectors at the Automatic Headlamp Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — STANDARD MOTOR PRODUCTS S3015.

This table covers the harness connectors at the AWD Control Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT995.

This table covers the harness connectors at the Battery Cable Junction Block. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOTORCRAFT supplies both parts for the 2019 Ford Explorer.

Listed part numbers: MOTORCRAFT WPT1564 and MOTORCRAFT WPT1571.

This table covers the harness connectors at the Battery Current Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Battery Current Sensor Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Part numbers include MOTORCRAFT WPT1144, MOTORCRAFT WPT1413 and STANDARD MOTOR PRODUCTS S1025.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Blower Motor Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and DORMAN. The "Popular" part is MOTORCRAFT WPT1486.

This group includes MOTORCRAFT WPT1486, DORMAN 645184 and DORMAN 645090 and the remaining parts above.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Blower Motor Control Module / Resistor Connector parts are listed for the 2019 Ford Explorer, from STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 2 other brands. STANDARD MOTOR PRODUCTS S1763 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS S1763, WELLS 1P1700 and FOUR SEASONS 70058, among others listed above.

This table covers the harness connectors at the Body Control Module (BCM). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1512.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Fluid Level Sensor Connector parts are listed for the 2019 Ford Explorer, from DORMAN and MOTORCRAFT.

Listed part numbers: DORMAN 645136 and MOTORCRAFT WPT118.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — STANDARD MOTOR PRODUCTS S2410.

This table covers the harness connectors at the Brake Pedal. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT912.

This table covers the harness connectors at the Brake Pressure Warning Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1500.

This table covers the harness connectors at the Cabin Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT1249.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Camshaft Position Sensor Connector parts for the 2019 Ford Explorer come from 4 brands — MOTORCRAFT, WELLS, DORMAN and 1 other brand. The "Popular" part is MOTORCRAFT WPT986.

Part numbers include MOTORCRAFT WPT986, WELLS 1P1261 and DORMAN 645247, among others listed above.

This table covers the harness connectors at the Climate Control Sun Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1013.

This table covers the harness connectors at the Communication Interface Module (VCIM). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT923.

This table covers the wiring-harness connectors at the Console. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: MOTORCRAFT WPT1047.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and WELLS.

Part numbers include MOTORCRAFT WPT1492 and WELLS 1P1261.

This table covers the harness connectors at the Cruise Control Distance Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — STANDARD MOTOR PRODUCTS S2856.

This table covers the harness connectors at the Cruise Control Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1411.

This table covers the harness connectors at the Cylinder Head Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Cylinder Head Temperature Sensor Connector parts for the 2019 Ford Explorer come from 3 brands — HOLSTEIN, MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes HOLSTEIN 2HAR0035, MOTORCRAFT WPT984 and STANDARD MOTOR PRODUCTS S2342.

This table covers the harness connectors at the Deck Lid / Liftgate Ajar Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOTORCRAFT supplies the 3 Deck Lid / Liftgate Ajar Switch Connector parts for the 2019 Ford Explorer.

Listed part numbers: MOTORCRAFT WPT1596, MOTORCRAFT WPT1439 and MOTORCRAFT WPT1041.

This table covers the harness connectors at the Digital Sound Processing Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1145.

This table covers the harness connectors at the Digital Sound Processing Unit Module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT959.

This table covers the harness connectors at the Dome Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Dome Lamp Connector parts are listed for the 2019 Ford Explorer, from MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes MOTORCRAFT WPT1249, MOTORCRAFT WPT1814 and STANDARD MOTOR PRODUCTS S3039.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1554.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOTORCRAFT supplies the 3 Door Lock Switch Connector parts for the 2019 Ford Explorer.

This group includes MOTORCRAFT WPT1139, MOTORCRAFT WPT1548 and MOTORCRAFT WPT1219.

This table covers the harness connectors at the Door Sill Plate. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1103.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOTORCRAFT supplies both parts for the 2019 Ford Explorer.

Listed part numbers: MOTORCRAFT WPT984 and MOTORCRAFT WPT1542.

This table covers the harness connectors at the Driver Information Display Module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT983.

This table covers the harness connectors at the EGR Pressure Feedback (DPFE) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 EGR Pressure Feedback (DPFE) Sensor Connector parts for the 2019 Ford Explorer come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT WPT965, MOTORCRAFT WPT322 and MOTORCRAFT WPT1049.

This table covers the harness connectors at the Fog / Driving Lamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1497.

This table covers the harness connectors at the Fuel Injection Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Injection Pressure Sensor Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOTORCRAFT WPT1308 and STANDARD MOTOR PRODUCTS S1038.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injector Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and WELLS.

Part numbers include MOTORCRAFT WPT1051, MOTORCRAFT WPT1302 and WELLS 1P1344.

This table covers the harness connectors at the Fuel Pump Drive Module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Pump Drive Module Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes MOTORCRAFT WPT1775 and STANDARD MOTOR PRODUCTS S2919.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Sending Unit Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOTORCRAFT WPT909 and STANDARD MOTOR PRODUCTS S2830.

This table covers the harness connectors at the Fuel Tank. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: DORMAN 645239.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Tank Pressure Sensor Connector parts are listed for the 2019 Ford Explorer, from MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Part numbers include MOTORCRAFT WPT990 and STANDARD MOTOR PRODUCTS S2271.

This table covers the harness connectors at the Gearshift Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT911.

This table covers the harness connectors at the Glove Box Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Glove Box Lamp Connector parts for the 2019 Ford Explorer come from MOTORCRAFT.

Part numbers include MOTORCRAFT WPT314 and MOTORCRAFT WPT841.

This table covers the harness connectors at the GPS Navigation System. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOTORCRAFT supplies both parts for the 2019 Ford Explorer.

Listed part numbers: MOTORCRAFT WPT957 and MOTORCRAFT WPT1590.

This table covers the harness connectors at the Grille Air Intake / Shutter Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1569.

This table covers the harness connectors at the Headlamp Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Headlamp Level Sensor Connector parts for the 2019 Ford Explorer come from 2 brands — DORMAN and MOTORCRAFT.

This group includes DORMAN 645323 and MOTORCRAFT WPT1578.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Headlamp Switch Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOTORCRAFT WPT1294 and STANDARD MOTOR PRODUCTS S3035.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2019 Ford Explorer — DORMAN 645181.

This table covers the harness connectors at the Heated Windshield Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT801.

This table covers the harness connectors at the Heater Air Door Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Heater Air Door Actuator Connector parts for the 2019 Ford Explorer come from MOTORCRAFT.

This group includes MOTORCRAFT WPT1049, MOTORCRAFT WPT962 and MOTORCRAFT WPT1151.

This table covers the harness connectors at the High Mount Brake Light. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1052.

This table covers the harness connectors at the Hood Ajar Indicator Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Hood Ajar Indicator Switch Connector parts are listed for the 2019 Ford Explorer, from MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes MOTORCRAFT WPT984 and STANDARD MOTOR PRODUCTS S799.

This table covers the harness connectors at the Horn. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Horn Connector parts are listed for the 2019 Ford Explorer, from MOTORCRAFT, DORMAN and ROSTRA.

Part numbers include DORMAN 645215, MOTORCRAFT WPT1051 and MOTORCRAFT WPT967, among others listed above.

This table covers the harness connectors at the HVAC Control Switch / Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: GPD 1713191.

This table covers the harness connectors at the HVAC Temperature Control. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT1163.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Coil Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Part numbers include MOTORCRAFT WPT1695 and STANDARD MOTOR PRODUCTS S2486.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Ignition Starter Switch Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes MOTORCRAFT WPT1164, MOTORCRAFT WPT957 and STANDARD MOTOR PRODUCTS S2277.

This table covers the harness connectors at the Impact / Crash Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: DORMAN 645144.

This table covers the harness connectors at the Information Display Screen. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Information Display Screen Connector parts for the 2019 Ford Explorer come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT WPT242 and MOTORCRAFT WPT1278.

This table covers the harness connectors at the Inside Rear View Mirror. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Inside Rear View Mirror Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes MOTORCRAFT WPT1294 and STANDARD MOTOR PRODUCTS S3035.

This table covers the harness connectors at the Interior Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Interior Light Switch Connector parts for the 2019 Ford Explorer come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT WPT1497, MOTORCRAFT WPT977 and MOTORCRAFT WPT1554, plus the other parts above.

This table covers the harness connectors at the Keyless Entry Module / Receiver. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Keyless Entry Module / Receiver Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes MOTORCRAFT WPT1590, MOTORCRAFT WPT1329 and MOTORCRAFT WPT1569 and the remaining parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Knock / Detonation Sensor Connector parts for the 2019 Ford Explorer come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOTORCRAFT WPT1220 and STANDARD MOTOR PRODUCTS S2909.

This table covers the harness connectors at the License Plate Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT1809.

This table covers the harness connectors at the Liftgate Object Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT984.

This table covers the harness connectors at the Liftgate Window Release Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — STANDARD MOTOR PRODUCTS S799.

This table covers the harness connectors at the Lighting Control Module (LCM). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1550.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Manifold Pressure (MAP) Sensor Connector parts for the 2019 Ford Explorer come from 3 brands — MOTORCRAFT, STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Part numbers include MOTORCRAFT WPT1339, STANDARD MOTOR PRODUCTS S2033 and UNITED MOTOR PRODUCTS CON214.

This table covers the harness connectors at the Map / Reading Light. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — MOTORCRAFT WPT911.

This table covers the harness connectors at the Message Center. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Message Center Connector parts for the 2019 Ford Explorer come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT WPT1049, MOTORCRAFT WPT242 and MOTORCRAFT WPT1533.

This table covers the harness connectors at the Multi-Function Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT955.

This table covers the harness connectors at the Occupant Detection Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1554.

This table covers the harness connectors at the Oil Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOTORCRAFT WPT1812.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2019 Ford Explorer — DORMAN 645156.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 On-Board Diagnostic (OBD) Port Connector parts for the 2019 Ford Explorer come from 2 brands — DORMAN and MOTORCRAFT.

This group includes DORMAN 645224 and MOTORCRAFT WPT615.