2020 Ford Fusion Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

20 Coolant / Antifreeze parts are listed for the 2020 Ford Fusion, from PRESTONE, VALVOLINE, PEAK and 4 other brands. FVP MV5050GAL carries the "Popular" badge. 16 parts fit every engine; the other 4 are engine-specific.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK, PRESTONE and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 10 options from VALVOLINE, MOTORCRAFT, PRESTONE and 3 other brands — built to original-equipment specification. ACDELCO 105027 is listed in this group.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

13 Coolant Hose / Pipe parts are listed for the 2020 Ford Fusion, from GATES, MOTORCRAFT, DORMAN and 3 other brands. DORMAN 626740 carries the "Popular" badge.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Coolant Hose / Pipe Seal parts for the 2020 Ford Fusion come from 3 brands — AJUSA, FEL-PRO and MOTORCRAFT.

Listed part numbers: AJUSA 16097400, FEL-PRO 36043 and MOTORCRAFT RG630.

This table covers the Coolant Hose Connector flanges. Read more

One part is listed for the 2020 Ford Fusion — SKP SKCH2119.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

7 Coolant Reservoir parts for the 2020 Ford Fusion come from 4 brands — TECHPRO, DORMAN, GPD and 1 other brand. The "Popular" part is DORMAN 603316.

Listed part numbers: DORMAN 603316, GPD 2411296 and TECHPRO FO3014156, plus the other parts above.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

5 Coolant Reservoir Cap parts for the 2020 Ford Fusion come from 5 brands — MOTORAD, CALORSTAT, GATES and 2 other brands. The "Popular" part is MOTORAD T57.

Part numbers include MOTORAD T57, CALORSTAT RC0150 and GATES 31549, among others listed above.

This table covers the Coolant Reservoir retainers and clips. Read more

One part is listed for the 2020 Ford Fusion — DORMAN 963249D.

This table covers the Cooling Fan control modules. Read more

This group shows a single part: SKP SK1247391.

This table covers the adapters used to pressure-test this cooling system. Read more

One part is listed for the 2020 Ford Fusion — MOTORAD 3043.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

16 Radiator parts are listed for the 2020 Ford Fusion, from CSF, KOYORAD, AGILITY and 7 other brands. CSF 3807 carries the "Popular" badge.

Economy: 1 part, from ULTRA-POWER. A representative part number is ULTRA-POWER 13320.

The Standard Replacement section: 8 options from CSF, KOYORAD, AGILITY and 5 other brands. CSF 3807 is listed in this group.

7 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2020 Ford Fusion — MOTORCRAFT RS531.

This table covers the petcocks used to drain the radiator. Read more

This group shows a single part: DORMAN 61134.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

19 Radiator Fan Assembly parts for the 2020 Ford Fusion come from 10 brands — FOUR SEASONS, DORMAN, GPD and 7 other brands. The "Popular" part is DORMAN 620074.

The Economy section: 6 options from DORMAN, GPD, SKP and 1 other brand. DORMAN 620074 is listed in this group.

Standard Replacement: 13 parts, from FOUR SEASONS, MOTORCRAFT, TYC and 3 other brands. A representative part number is FOUR SEASONS 75190.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

9 Radiator Hose parts for the 2020 Ford Fusion come from 4 brands — MOTORCRAFT, GATES, CONTINENTAL and 1 other brand. The "Popular" part is GATES 24397.

Part numbers include GATES 24397, GATES 24416 and CONTINENTAL 67029, among others listed above.

This table covers the brackets that mount the Radiator Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DORMAN 927842.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

3 Temperature Sender / Sensor parts are listed for the 2020 Ford Fusion, from GPD, HOLSTEIN and UNITED MOTOR PRODUCTS.

This group includes GPD 1712498, HOLSTEIN 2CTS0065 and UNITED MOTOR PRODUCTS CTS97.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

7 Thermostat parts for the 2020 Ford Fusion come from 7 brands — AUTOTECNICA, SKP, MOTORAD and 4 other brands. The "Popular" part is MOTORAD 512185.

The Economy section: 2 options from AUTOTECNICA and SKP. AUTOTECNICA MA0717551 is listed in this group.

Standard Replacement: 5 parts, from MOTORAD, MOTORCRAFT, CALORSTAT and 2 other brands. A representative part number is MOTORAD 512185.

Part numbers include MOTORAD 512185, AUTOTECNICA MA0717551 and SKP SK902733, among others listed above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2020 Ford Fusion, from FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. FEL-PRO 35839 carries the "Popular" badge.

Part numbers include FEL-PRO 35839, FEL-PRO 35833 and APEX AWO2247, among others listed above.

This table covers the housings and outlets the thermostat sits in. Read more

4 Thermostat Housing / Water Outlet parts for the 2020 Ford Fusion come from 3 brands — FOUR SEASONS, DORMAN and MOTORAD.

The Economy section: 1 option from DORMAN. DORMAN 902231 is listed in this group.

Standard Replacement: 3 parts, from FOUR SEASONS and MOTORAD. A representative part number is FOUR SEASONS 86370.

Part numbers include DORMAN 902231, FOUR SEASONS 86370 and FOUR SEASONS 85928, among others listed above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

12 Water Pump parts for the 2020 Ford Fusion come from 12 brands — SKP, US MOTOR WORKS, FVP and 9 other brands. The "Popular" part is SKP SK1256000.

The Economy section: 4 options from SKP, US MOTOR WORKS, FVP and 1 other brand. SKP SK1256000 is listed in this group.

Standard Replacement: 8 parts, from ACDELCO, AISIN, FOUR SEASONS and 5 other brands. A representative part number is ACDELCO 252818.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Water Pump Seal / O-Ring parts for the 2020 Ford Fusion come from 3 brands — APEX, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: APEX AWP3177, FEL-PRO 35772 and MAHLE / CLEVITE 72230.