This page lists 317 engine parts for the 2021 Ford Bronco, across 69 part types, covering all 4 engine options (1.5L L3 Turbocharged, 2.0L L4 Turbocharged, 2.3L L4 Turbocharged and 2.7L V6 Turbocharged). Every part shows its brand, manufacturer part number and fitment notes.
The engine on the 2021 Ford Bronco covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (33 parts), Oil (31 parts) and Motor Mount (14 parts). The other 66 part types cover the remaining 239 parts.
The 2021 Ford Bronco was sold with 4 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2021 Ford Bronco engine parts are MAHLE / CLEVITE (35 parts), MELLING (28 parts) and DORMAN (22 parts), plus 51 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
31 parts on this 2021 Ford Bronco page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FEL-PRO 26751PT (Cylinder Head Gasket) and ANCHOR 3622 (Motor Mount). Click any part number to see every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | GS34060 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Camshaft Seal KitIncludes 4 Pieces | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2021 Ford Bronco — MAHLE / CLEVITE GS34060.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Fits: 2.3L L4 Turbocharged | 46050A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: SEALED POWER 46050A.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged | 805070 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Integrated Shaft Seal | View on Amazon |
| ELRING Fits: 2.3L L4 Turbocharged | 771030 | 🇺🇸 US 🇨🇦 CA | BadlandsBody code: E5C | View on Amazon |
| MAHLE / CLEVITE Fits: 2.3L L4 Turbocharged | CS55526 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Conversion / Lower Gasket Set parts for the 2021 Ford Bronco come from 2 brands — ELRING and MAHLE / CLEVITE.
This group includes ELRING 805070, ELRING 771030 and MAHLE / CLEVITE CS55526.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged | 023631 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (Fluoride Rubber)Outer Diameter [mm]: 50 | View on Amazon |
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 649250 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (Fluoride Rubber)Outer Diameter [mm]: 50 | View on Amazon |
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 023940 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Mounting SleeveMaterial: PTFE (polytetrafluoroethylene) | View on Amazon |
| FEL-PRO Fits: 2.7L V6 Turbocharged | TCS46117 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 67756 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PTFE (Polytetrafluoroethylene)Includes Retainer | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | 68115 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fluoroelastomer | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | JV1754 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetIncludes RTV | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Crankshaft Seal parts are listed for the 2021 Ford Bronco, from ELRING, MAHLE / CLEVITE and FEL-PRO.
Listed part numbers: ELRING 023631, ELRING 649250 and ELRING 023940, plus the other parts above.
Crankshaft Seal Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 635557 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Crankshaft Seal covers.
This group shows a single part: DORMAN 635557.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 756750 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetBolt Head-/Nut Design: Female Torx | View on Amazon |
| FEL-PRO Fits: 2.3L L4 Turbocharged | ES72207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | GS33489 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cylinder Head Bolt KitSet | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | GS33863 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cylinder Head Bolt KitSet | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
4 Cylinder Head Bolt parts for the 2021 Ford Bronco come from 3 brands — MAHLE / CLEVITE, ELRING and FEL-PRO.
Listed part numbers: ELRING 756750, FEL-PRO ES72207 and MAHLE / CLEVITE GS33489, plus the other parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.7L V6 Turbocharged | 26751PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma TorqueMLS | View on Amazon |
| FEL-PRO Popular Fits: 2.7L V6 Turbocharged | 26752PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma TorqueMLS | View on Amazon |
| ELRING Fits: 2.7L V6 Turbocharged | 220384 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftFrom 03/05/2021 | View on Amazon |
| ELRING Fits: 2.7L V6 Turbocharged | 220373 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightFrom 05/03/2021 | View on Amazon |
| FEL-PRO Fits: 2.0L L4 Turbocharged | 26860PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 55526 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | 55303 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | 55302 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 611122000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Cylinder Head Gasket parts for the 2021 Ford Bronco come from 4 brands — FEL-PRO, MAHLE / CLEVITE, ELRING and 1 other brand. The "Popular" part is FEL-PRO 26751PT.
This group includes FEL-PRO 26751PT, FEL-PRO 26752PT and ELRING 220384 and the remaining parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged | 756200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged | HS55526A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 2.3L L4 Turbocharged | HS55526 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts for the 2021 Ford Bronco come from 2 brands — MAHLE / CLEVITE and ELRING.
This group includes ELRING 756200, MAHLE / CLEVITE HS55526A and MAHLE / CLEVITE HS55526.
Cylinder Head Temperature Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.3L L4 Turbocharged | TX365 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 2.7L V6 Turbocharged | TS685 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Attachment Method: Screw-InConnector Type: Plug | View on Amazon |
| WELLS Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 5S17577 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 2.7L V6 Turbocharged | 5S17550 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring.
4 Cylinder Head Temperature Sensor parts are listed for the 2021 Ford Bronco, from STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS TX365, STANDARD MOTOR PRODUCTS TS685 and WELLS 5S17577, among others listed above.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 2.0L L4 Turbocharged | FO1228183 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAPA Certified | View on Amazon |
| TECHPRO Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | FO1228196 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| TECHPRO Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | FO1228195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Lower | View on Amazon |
| VARIOUS MFR Fits: 2.0L L4 Turbocharged | FO1228183 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE New | View on Amazon |
| VARIOUS MFR Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | FO1228195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAPA Certified | View on Amazon |
| VARIOUS MFR Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | FO1228207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAPA Certified | View on Amazon |
This table covers the Engine covers.
6 Engine Cover parts for the 2021 Ford Bronco come from 2 brands — TECHPRO and VARIOUS MFR.
Part numbers include TECHPRO FO1228183, TECHPRO FO1228196 and TECHPRO FO1228195, among others listed above.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | V5823 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.7L V6 Turbocharged | V3497 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 2.7L V6 Turbocharged | 1013497 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.116 Head DIA. 0.2134 Stem. 3.837 OAL. OEM # JT4Z6505A | View on Amazon |
| SBI Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 13481SN | 🇺🇸 US 🇨🇦 CA | Stellite FaceSodium Filled | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | 13497 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Exhaust Valve parts are listed for the 2021 Ford Bronco, from MELLING, SBI and QUALCAST.
Listed part numbers: MELLING V5823, MELLING V3497 and QUALCAST 1013497, plus the other parts above.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 102450 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Automatic trans. | View on Amazon |
| DORMAN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 594726 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
2 Harmonic Balancer parts for the 2021 Ford Bronco come from 2 brands — ATP and DORMAN.
This group includes ATP 102450 and DORMAN 594726.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 926885 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: 2.3L L4 Turbocharged | SK926885 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Harmonic Balancer bolts.
2 Harmonic Balancer Bolt parts are listed for the 2021 Ford Bronco, from DORMAN and SKP.
Listed part numbers: DORMAN 926885 and SKP SK926885.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 756820 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (Fluoride Rubber) | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | MS19948 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| ULTRA-POWER Fits: 2.3L L4 Turbocharged | MS19948 | 🇺🇸 US 🇨🇦 CA | Intake Manifold Set | View on Amazon |
| VICTOR REINZ Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 111109501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Intake Manifold Gasket parts for the 2021 Ford Bronco come from 4 brands — ELRING, MAHLE / CLEVITE, ULTRA-POWER and 1 other brand.
Listed part numbers: ELRING 756820 and MAHLE / CLEVITE MS19948, plus the other parts above.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | MS97205 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | MS97205 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Intake Plenum Gasket parts are listed for the 2021 Ford Bronco, from FEL-PRO and ULTRA-POWER.
This group includes FEL-PRO MS97205 and the remaining parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | V5824 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.7L V6 Turbocharged | V3428 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 2.7L V6 Turbocharged | 1013428 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.280 Head Dia. 0.2142 Stem. 4.242 OAL | View on Amazon |
| SBI Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 13480 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 2.7L V6 Turbocharged | 13510 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 2.7L V6 Turbocharged | 13428 | 🇺🇸 US 🇨🇦 CA | OEM # FT4Z6507A | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
6 Intake Valve parts are listed for the 2021 Ford Bronco, from SBI, MELLING and QUALCAST.
This group includes MELLING V5824, MELLING V3428 and QUALCAST 1013428 and the remaining parts above.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 2.0L L4 Turbocharged | 3622 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightHydraulic | View on Amazon |
| ANCHOR Popular Fits: 2.3L L4 Turbocharged | 3715 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftHydraulic | View on Amazon |
| ANCHOR Fits: 2.0L L4 Turbocharged | 3567 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| ANCHOR Fits: 2.3L L4 Turbocharged | 3716 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightHydraulic | View on Amazon |
| ANCHOR Fits: 2.7L V6 Turbocharged | 3697 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| ANCHOR Fits: 2.7L V6 Turbocharged | 3698 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.0L L4 Turbocharged | A20117 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.3L L4 Turbocharged | A20188 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.3L L4 Turbocharged | A20189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.7L V6 Turbocharged | A20161 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.7L V6 Turbocharged | A20162 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| PIONEER Fits: 2.0L L4 Turbocharged | 603567 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| PIONEER Fits: 2.0L L4 Turbocharged | 613622 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightComplete Assembly | View on Amazon |
| WESTAR Fits: 2.3L L4 Turbocharged | EM4675 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
14 Motor Mount parts are listed for the 2021 Ford Bronco, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 3622 carries the "Popular" badge.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.0L L4 Turbocharged | 300973 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Motor Mount kits.
One part is listed for the 2021 Ford Bronco — ANCHOR 300973.
Oil
Summary: Notes list SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged, 2.0L L4 Turbocharged | 20228 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 125195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged, 2.0L L4 Turbocharged | 124315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30Mobil 1 Advanced | View on Amazon |
| MOTORCRAFT Popular Fits: 2.0L L4 Turbocharged | XO5W30Q1FS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full SyntheticSAE 5W-30 | View on Amazon |
| VALVOLINE Popular Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged, 2.0L L4 Turbocharged | VV955 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| IDEMITSU Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 30015204750 | 🇺🇸 US | IFG3 5W-30 SP/Motor Oil1 Quart | View on Amazon |
| LIQUI MOLY Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 20136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 20226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 20138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-305 Liter | View on Amazon |
| LUCAS OIL Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 18008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 0W-306 Gallon | View on Amazon |
| MOBIL Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 112627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 124595 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Truck & SUV 5W-30Mobil 1 Truck & SUV | View on Amazon |
| PENTOSIN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 8044214 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 8044216 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 891678 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 904564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 891670 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 904566 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 881164 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | VV1556 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-301 Quart | View on Amazon |
| MOBIL Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 125201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage 5W-301 Quart | View on Amazon |
| MOBIL Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 123842 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| MOBIL Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 103767 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | VV179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 881163 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 881169 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 124407 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super 5W-30Mobil Super | View on Amazon |
| MOTORCRAFT Popular Fits: 2.0L L4 Turbocharged | XO5W30Q1SP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Synthetic BlendSAE 5W-30 | View on Amazon |
| MOTORCRAFT Popular Fits: 2.0L L4 Turbocharged | XO5W305Q3SP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Synthetic BlendSAE 5W-30 | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 797975 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | 881159 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
31 Oil parts are listed for the 2021 Ford Bronco, from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Grades run from Full Synthetic through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.3L L4 Turbocharged | 918625 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GPD Fits: 2.3L L4 Turbocharged | 2611478 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORCRAFT Fits: 2.7L V6 Turbocharged | YOC16 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 2.3L L4 Turbocharged | OCK27 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
4 Oil Cooler parts are listed for the 2021 Ford Bronco, from DORMAN, GPD, MOTORCRAFT and 1 other brand.
Part numbers include DORMAN 918625, GPD 2611478 and MOTORCRAFT YOC16, among others listed above.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.0L L4 Turbocharged | 72709 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plastic Carrier Gasket with Silicone Beading | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged | B32785 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Cooler GasketMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.3L L4 Turbocharged | B33818 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Cooler GasketMolded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Cooler Gasket parts for the 2021 Ford Bronco come from 2 brands — MAHLE / CLEVITE and FEL-PRO.
Part numbers include FEL-PRO 72709, MAHLE / CLEVITE B32785 and MAHLE / CLEVITE B33818.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT Fits: 2.0L L4 Turbocharged | EDPS59 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil DipstickDipstick Only | View on Amazon |
| MOTORCRAFT Fits: 2.7L V6 Turbocharged | EDPS42 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil DipstickDipstick Only | View on Amazon |
This table covers the Oil Dipstick tubes.
MOTORCRAFT supplies both parts for the 2021 Ford Bronco.
This group includes MOTORCRAFT EDPS59 and MOTORCRAFT EDPS42.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 090034 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.75 Thread | View on Amazon |
| DORMAN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 090175 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Integrated GasketM12 x 1.75 Thread | View on Amazon |
| DORMAN Fits: 2.7L V6 Turbocharged | 097826 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plastic | View on Amazon |
| DORMAN Fits: 2.7L V6 Turbocharged | 097826HPCD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | - ClamshellHigh Performance | View on Amazon |
| DORMAN Fits: 2.7L V6 Turbocharged | 097826HP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Performance | View on Amazon |
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 823400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts are listed for the 2021 Ford Bronco, from DORMAN and ELRING.
This group includes DORMAN 090034, DORMAN 090175 and DORMAN 097826 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 056130 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 | View on Amazon |
| FEL-PRO Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 72907 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged | B33828 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.3L L4 Turbocharged | B32655 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.0L L4 Turbocharged | 712492000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Drain Plug Gasket parts for the 2021 Ford Bronco come from 4 brands — MAHLE / CLEVITE, ELRING, FEL-PRO and 1 other brand.
This group includes ELRING 056130, FEL-PRO 72907 and MAHLE / CLEVITE B33828 and the remaining parts above.
Oil Drain Plug Removal Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.7L V6 Turbocharged | 090999 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | For GM, Ford, VW, Audi and BMW | View on Amazon |
This table covers the Oil Drain Plug Removal tools. This is a service tool, not a wear part — match the application in the notes.
One part is listed for the 2021 Ford Bronco — DORMAN 090999.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | MO201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORCRAFT Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | EC791 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SAE-5W30 | View on Amazon |
This table covers the caps on the oil filler neck.
2 Oil Filler Cap parts are listed for the 2021 Ford Bronco, from MOTORAD and MOTORCRAFT.
Listed part numbers: MOTORAD MO201 and MOTORCRAFT EC791.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRO-TEC Popular Fits: 2.7L V6 Turbocharged | PXL10050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BOSCH Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 72161WS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Workshop Oil Filter | View on Amazon |
| CHAMP / LUBER-FINER Fits: 2.7L V6 Turbocharged | P2062 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FRAM Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | FE3614 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FRAM Fits: 2.7L V6 Turbocharged | FE11955 | 🇺🇸 US 🇨🇦 CA | Synthetic Endurance or Tough Guard | View on Amazon |
| FVP Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | R1348 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On Filter | View on Amazon |
| FVP Fits: 2.7L V6 Turbocharged | G0050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE# KU2Z6731A | View on Amazon |
| PRIME GUARD Fits: 2.7L V6 Turbocharged | POF8154 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PRO-TEC Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | PXL51348 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On Filter | View on Amazon |
| VARIOUS MFR Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | PG241 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On | View on Amazon |
| VARIOUS MFR Fits: 2.7L V6 Turbocharged | PG8154 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 2.7L V6 Turbocharged | M1C351A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
| WIX Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 51348XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | M1102A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 3330 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil FilterConnection Size: 3/4-16 | View on Amazon |
| MOTORCRAFT Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | FL910S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Design3/4" Thread | View on Amazon |
| MOTORCRAFT Popular Fits: 2.7L V6 Turbocharged | FL2062A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WIX Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 51348 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On Filter | View on Amazon |
| WIX Popular Fits: 2.7L V6 Turbocharged | WL10050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ACDELCO Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | PF53 | 🇺🇸 US 🇨🇦 CA | Gold / Professional or Gold / Professional DurapackSpin-On | View on Amazon |
| ACDELCO Fits: 2.7L V6 Turbocharged | PF684G | 🇺🇸 US 🇨🇦 CA | Gold / Professional | View on Amazon |
| DENSO Fits: 2.7L V6 Turbocharged | 1503100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| FEL-PRO Fits: 2.7L V6 Turbocharged | OFCS1007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Cap and Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | LF655 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On | View on Amazon |
| HASTINGS / BALDWIN Fits: 2.7L V6 Turbocharged | LF732 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HENGST Fits: 2.0L L4 Turbocharged | H319W | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On | View on Amazon |
| HENGST Fits: 2.7L V6 Turbocharged | E894HD100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket SetCartridge | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | OC338 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On87.00mm Height | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | OX1214D | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cartridge | View on Amazon |
| MOTORCRAFT Fits: 2.0L L4 Turbocharged | FL2114 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Retail Spec | View on Amazon |
| MOTORCRAFT Fits: 2.7L V6 Turbocharged | FL2062AW | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | PG241EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended LifeSpin-On | View on Amazon |
| VARIOUS MFR Fits: 2.7L V6 Turbocharged | PO8154EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
33 Oil Filter parts are listed for the 2021 Ford Bronco, from VARIOUS MFR, MOTORCRAFT, WIX and 13 other brands. PRO-TEC PXL10050 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by MOTORCRAFT, WIX, ACDELCO and 7 other brands.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.0L L4 Turbocharged | 73195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Equipment (OE) Part Number FB5Z6840A | View on Amazon |
| FEL-PRO Fits: 2.0L L4 Turbocharged | 72949 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Equipment (OE) Part Number 1S7Z6840AA | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | B33849 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Filter Adapter GasketMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 712028400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
4 Oil Filter Adapter Gasket / O-Ring parts for the 2021 Ford Bronco come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO 73195, FEL-PRO 72949 and MAHLE / CLEVITE B33849, plus the other parts above.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 2.7L V6 Turbocharged | FD1416939PRM | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Filter and AEM o-ringsÜRO Solutions | View on Amazon |
| DORMAN Fits: 2.7L V6 Turbocharged | 921157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Plastic Design | View on Amazon |
| MOTORAD Fits: 2.7L V6 Turbocharged | MO363 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Filter covers.
3 Oil Filter Cover parts for the 2021 Ford Bronco come from 3 brands — AUTOTECNICA, DORMAN and MOTORAD.
Part numbers include AUTOTECNICA FD1416939PRM, DORMAN 921157 and MOTORAD MO363.
Oil Filter Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.0L L4 Turbocharged | 73869 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: FEL-PRO 73869.
Oil Filter Housing Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged | 059920 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Number of Mounting Bores: 4 | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | GS33875 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Filter Housing Seal KitMolded Rubber | View on Amazon |
This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Oil Filter Housing Seal parts are listed for the 2021 Ford Bronco, from ELRING and MAHLE / CLEVITE.
Part numbers include ELRING 059920 and MAHLE / CLEVITE GS33875.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2021 Ford Bronco — VICTOR REINZ 703141410.
Oil Pump Control Valve / Solenoid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.0L L4 Turbocharged | 926542 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 2.3L L4 Turbocharged | OPS410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 2.7L V6 Turbocharged | OPS411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
3 Oil Pump Control Valve / Solenoid parts for the 2021 Ford Bronco come from 2 brands — STANDARD MOTOR PRODUCTS and DORMAN.
This group includes DORMAN 926542, STANDARD MOTOR PRODUCTS OPS410 and STANDARD MOTOR PRODUCTS OPS411.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | GS34093 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE GS34093.
Oil Pump Pickup Tube / Screen
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | EPT1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Pump Pickup Tube | View on Amazon |
| MOTORCRAFT Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | EPT2 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Pump Pickup Tube | View on Amazon |
| MOTORCRAFT Fits: 2.7L V6 Turbocharged | EPT3 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Pump Pickup Tube and Screen | View on Amazon |
This table covers the pickup tubes and screens that feed the oil pump.
3 Oil Pump Pickup Tube / Screen parts for the 2021 Ford Bronco come from MOTORCRAFT.
Listed part numbers: MOTORCRAFT EPT1, MOTORCRAFT EPT2 and MOTORCRAFT EPT3.
Oil Pump Pickup Tube O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 157310 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BadlandsBody code: R9D | View on Amazon |
This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2021 Ford Bronco — ELRING 157310.
Oil Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.3L L4 Turbocharged | 013640 | 🇺🇸 US 🇨🇦 CA | BadlandsBody code: E5C | View on Amazon |
| FEL-PRO Fits: 2.0L L4 Turbocharged | 72705 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Oil Pump Seal parts for the 2021 Ford Bronco come from 2 brands — ELRING and FEL-PRO.
Part numbers include ELRING 013640 and FEL-PRO 72705.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.7L V6 Turbocharged | K27206P | 🇺🇸 US | Includes Premium Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
This group shows a single part: ENGINETECH K27206P.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS Fits: 2.7L V6 Turbocharged | 0219276 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
This group shows a single part: ITM ENGINE COMPONENTS 0219276.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 2.7L V6 Turbocharged | VF02551 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.7L V6 Turbocharged | MR1352 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 2.7L V6 Turbocharged | 402923 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Roller cam follower | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | 1801342 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustRoller cam follower | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
4 Rocker Arm parts are listed for the 2021 Ford Bronco, from INA, MELLING, QUALCAST and 1 other brand.
Listed part numbers: INA VF02551, MELLING MR1352 and QUALCAST 402923, plus the other parts above.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | C567 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CLOYES Fits: 2.7L V6 Turbocharged | C959 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 1078 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.7L V6 Turbocharged | 959 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 2.3L L4 Turbocharged | C1175 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Chain | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
5 Timing Chain parts for the 2021 Ford Bronco come from 3 brands — CLOYES, MELLING and S.A. GEAR.
Part numbers include CLOYES C567, CLOYES C959 and MELLING 1078, among others listed above.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Fits: 2.3L L4 Turbocharged | 76409 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Guide, Tensioner Arm, Tensioner | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.3L L4 Turbocharged | 90567S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Chain Tensioner Guide, Chain Guide, Chain Tensioner, Timing Chain, Crankshaft Sprocket | View on Amazon |
| ENGINETECH Fits: 2.3L L4 Turbocharged | TS020 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 2.3L L4 Turbocharged | 31078S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.0L L4 Turbocharged | 90567S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Chain Tensioner Guide, Chain Guide, Chain Tensioner, Timing Chain, Crankshaft Sprocket | View on Amazon |
| ENGINETECH Fits: 2.0L L4 Turbocharged | TS020 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 2.0L L4 Turbocharged | 31078S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
7 Timing Chain & Component Kit parts are listed for the 2021 Ford Bronco, from CLOYES, ENGINETECH, MELLING and 1 other brand.
In the Economy grade, S.A. GEAR supplies 1 part: the catalog's value-priced group. A representative part number is S.A. GEAR 76409.
The Standard Replacement section lists 3 options from CLOYES, ENGINETECH and MELLING — built to original-equipment specification. CLOYES 90567S is listed in this group.
3 ungrouped parts are not assigned to a grade, with the same engine-level match.
This group includes S.A. GEAR 76409, CLOYES 90567S and ENGINETECH TS020 and the remaining parts above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.3L L4 Turbocharged, 2.0L L4 Turbocharged | BG7040 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Popular Fits: 2.3L L4 Turbocharged | 71190 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | BT7040 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| MELLING Fits: 2.7L V6 Turbocharged | BG7026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| MELLING Fits: 2.7L V6 Turbocharged | BT7024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | R76291 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | R76290 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| S.A. GEAR Fits: 2.3L L4 Turbocharged | 91338 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmArm | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
8 Timing Chain Guide / Damper parts for the 2021 Ford Bronco come from 3 brands — MELLING, S.A. GEAR and PREFERRED COMPONENTS INC. The "Popular" part is MELLING BG7040.
Part numbers include MELLING BG7040, S.A. GEAR 71190 and MELLING BT7040, among others listed above.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.7L V6 Turbocharged | 96066 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| CLOYES Fits: 2.7L V6 Turbocharged | 96065 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| INA Fits: 2.3L L4 Turbocharged | ZT0692 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | BT7051 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.7L V6 Turbocharged | BT7026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| MELLING Fits: 2.7L V6 Turbocharged | BT7025 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | T66003A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 2.3L L4 Turbocharged | 91299 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
8 Timing Chain Tensioner parts are listed for the 2021 Ford Bronco, from MELLING, CLOYES, INA and 2 other brands.
This group includes CLOYES 96066, CLOYES 96065 and INA ZT0692 and the remaining parts above.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | T33854 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2021 Ford Bronco — MAHLE / CLEVITE T33854.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 68072 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | 68024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fluoroelastomer | View on Amazon |
| SKF Fits: 2.3L L4 Turbocharged | 14671 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 2.7L V6 Turbocharged | 811049600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Timing Cover Seal parts are listed for the 2021 Ford Bronco, from MAHLE / CLEVITE, SKF and VICTOR REINZ.
Part numbers include MAHLE / CLEVITE 68072, MAHLE / CLEVITE 68024 and SKF 14671, among others listed above.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | S1205 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | S1315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 2.3L L4 Turbocharged | S1466 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
3 Timing Crank Sprocket parts are listed for the 2021 Ford Bronco, from CLOYES, MELLING and S.A. GEAR.
Part numbers include CLOYES S1205, MELLING S1315 and S.A. GEAR S1466.
Torque Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.0L L4 Turbocharged | 3564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.0L L4 Turbocharged | A20119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| PIONEER Fits: 2.0L L4 Turbocharged | 633564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Lower | View on Amazon |
| WESTAR Fits: 2.0L L4 Turbocharged | EM4554 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
4 Torque Strut Mount parts for the 2021 Ford Bronco come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.
This group includes ANCHOR 3564, DEA / MARMON RIDE CONTROL A20119 and PIONEER 633564 and the remaining parts above.
Turbocharger
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Fits: 2.0L L4 Turbocharged | 2511785 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GPD Fits: 2.3L L4 Turbocharged | 2511865 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GPD Fits: 2.7L V6 Turbocharged | 2513001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| GPD Fits: 2.7L V6 Turbocharged | 2513002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| MOTORCRAFT Fits: 2.0L L4 Turbocharged | TC57 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORCRAFT Fits: 2.3L L4 Turbocharged | TC56 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ROTOMASTER Fits: 2.0L L4 Turbocharged | K1020102N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the turbochargers that compress intake air.
7 Turbocharger parts are listed for the 2021 Ford Bronco, from GPD, MOTORCRAFT and ROTOMASTER.
Part numbers include GPD 2511785, GPD 2511865 and GPD 2513001, among others listed above.
Turbocharger Boost Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 2.0L L4 Turbocharged | 5S15716 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 2.3L L4 Turbocharged | 5S15723 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | CX2621 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Located On Intercooler | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NTK Fits: 2.7L V6 Turbocharged | TP0032 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 2.7L V6 Turbocharged | 5S15115 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Connector Gender: Female | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
5 Turbocharger Boost Sensor parts for the 2021 Ford Bronco come from 3 brands — WELLS, MOTORCRAFT and NTK.
The Economy section: 2 options from WELLS. WELLS 5S15716 is listed in this group.
Standard Replacement: 1 part, from MOTORCRAFT. A representative part number is MOTORCRAFT CX2621.
2 further parts sit outside the graded sections, with the same engine-level match.
Listed part numbers: WELLS 5S15716, WELLS 5S15723 and MOTORCRAFT CX2621, plus the other parts above.
Turbocharger Coolant Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.0L L4 Turbocharged | 667782 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply | View on Amazon |
| DORMAN Fits: 2.0L L4 Turbocharged | 667783 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return | View on Amazon |
| DORMAN Fits: 2.3L L4 Turbocharged | 667383 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| DORMAN Fits: 2.3L L4 Turbocharged | 667382 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
DORMAN supplies the 4 Turbocharger Coolant Line parts for the 2021 Ford Bronco.
Part numbers include DORMAN 667782, DORMAN 667783 and DORMAN 667383, among others listed above.
Turbocharger Diverter / Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.0L L4 Turbocharged | 667445 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 2.0L L4 Turbocharged | TBV1009 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Turbocharger Diverter / Bypass Valve parts are listed for the 2021 Ford Bronco, from DORMAN and STANDARD MOTOR PRODUCTS.
Part numbers include DORMAN 667445 and STANDARD MOTOR PRODUCTS TBV1009.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Fits: 2.0L L4 Turbocharged | 2535127 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Only Fits Compatible Aftermarket Turbochargers | View on Amazon |
| GPD Fits: 2.3L L4 Turbocharged | 2535105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Only Fits Compatible Aftermarket Turbochargers | View on Amazon |
| GPD Fits: 2.7L V6 Turbocharged | 2535130 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged | GS34097 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetTurbocharger Mounting Gasket Mounting Gasket Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.3L L4 Turbocharged | GS34095 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetTurbocharger Mounting Gasket Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Turbocharger Gasket parts for the 2021 Ford Bronco come from 2 brands — GPD and MAHLE / CLEVITE.
This group includes GPD 2535127, GPD 2535105 and GPD 2535130 and the remaining parts above.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 675229 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| DORMAN Fits: 2.7L V6 Turbocharged | 32100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set of 6 Studs and 6 NutsTurbo to Head | View on Amazon |
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 771230 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with gaskets/sealswith Mounting Manual, with Bolts/Screws | View on Amazon |
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 757770 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with gaskets/sealswith Mounting Manual, with Bolts/Screws | View on Amazon |
This table covers the fasteners that mount the turbocharger.
4 Turbocharger Mounting Hardware parts for the 2021 Ford Bronco come from 2 brands — DORMAN and ELRING.
Part numbers include DORMAN 675229, DORMAN 32100 and ELRING 771230, among others listed above.
Turbocharger Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | TF1005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Oil filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.
One part is listed for the 2021 Ford Bronco — GATES TF1005.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 2.3L L4 Turbocharged | TIH73 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Inlet | View on Amazon |
| DORMAN Fits: 2.3L L4 Turbocharged | 667381 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return | View on Amazon |
| DORMAN Fits: 2.3L L4 Turbocharged | 667380 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply | View on Amazon |
| DORMAN Fits: 2.3L L4 Turbocharged | 667384 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE FixIncludes Oil Lines | View on Amazon |
| MOTORCRAFT Fits: 2.3L L4 Turbocharged | OSL33 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pipe - Oil FeedSupply Line | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
5 Turbocharger Oil Line parts are listed for the 2021 Ford Bronco, from DORMAN, STANDARD MOTOR PRODUCTS and MOTORCRAFT. STANDARD MOTOR PRODUCTS TIH73 carries the "Popular" badge.
Listed part numbers: STANDARD MOTOR PRODUCTS TIH73, DORMAN 667381 and DORMAN 667380, plus the other parts above.
Turbocharger Oil Line Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.3L L4 Turbocharged | 760610 | 🇺🇸 US 🇨🇦 CA | Material: ACM (Polyacrylate) | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | GS33886 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Turbocharger Oil Line GasketMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged, 2.7L V6 Turbocharged | B33892 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plastic | View on Amazon |
This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
3 Turbocharger Oil Line Gasket / O-Ring parts are listed for the 2021 Ford Bronco, from MAHLE / CLEVITE and ELRING.
Listed part numbers: ELRING 760610, MAHLE / CLEVITE GS33886 and MAHLE / CLEVITE B33892.
Turbocharger Wastegate Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 0280751042 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Turbocharger Wastegate Actuator | View on Amazon |
This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
One part is listed for the 2021 Ford Bronco — BOSCH 0280751042.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 759100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: Zinc-Copper brazing alloy (ZN-CU) | View on Amazon |
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | VS50983 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts are listed for the 2021 Ford Bronco, from ELRING and MAHLE / CLEVITE.
Listed part numbers: ELRING 759100 and MAHLE / CLEVITE VS50983.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 2.7L V6 Turbocharged | 303215 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.515 OAL | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | 1403215 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2155 I.D. | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
2 Valve Guide parts are listed for the 2021 Ford Bronco, from QUALCAST and SBI.
This group includes QUALCAST 303215 and SBI 1403215.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.7L V6 Turbocharged | L5000 | 🇺🇸 US | Hydraulic | View on Amazon |
| MELLING Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | JB7534 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3.382mm Thick | View on Amazon |
| INA Fits: 2.7L V6 Turbocharged | VT02581 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | JB7501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3.00mm Thick | View on Amazon |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | JB7533 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3.302mm Thick | View on Amazon |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | JB7503 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3.100mm Thick | View on Amazon |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | JB7502 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3.050mm Thick | View on Amazon |
| QUALCAST Fits: 2.7L V6 Turbocharged | 362314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | VL575 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster Type | View on Amazon |
| SEALED POWER Fits: 2.7L V6 Turbocharged | HT2314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
10 Valve Lifter parts are listed for the 2021 Ford Bronco, from MELLING, ENGINETECH, INA and 3 other brands. ENGINETECH L5000 carries the "Popular" badge.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 2.7L V6 Turbocharged | 2212971 | 🇺🇸 US | Intake1.1200T I.D. 1.297 O.D. 0.190 | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | SB1140E1 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Cast Iron Cylinder Head | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | SB1297E1 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Cast Iron Cylinder Head | View on Amazon |
This table covers the Valve seats.
3 Valve Seat parts for the 2021 Ford Bronco come from 2 brands — SBI and QUALCAST.
Listed part numbers: QUALCAST 2212971, SBI SB1140E1 and SBI SB1297E1.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | VS2496 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| MELLING Fits: 2.0L L4 Turbocharged | VS2495 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| MELLING Fits: 2.7L V6 Turbocharged | VS1666 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
3 Valve Spring parts for the 2021 Ford Bronco come from MELLING.
This group includes MELLING VS2496, MELLING VS2495 and MELLING VS1666.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.7L V6 Turbocharged | VSR714 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve Spring retainers.
This group shows a single part: MELLING VSR714.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | EPF1104 | 🇺🇸 US | Intake and Exhaust1 Round bead type | View on Amazon |
| ENGINETECH Fits: 2.7L V6 Turbocharged | EPF1140 | 🇺🇸 US | Intake and Exhaust3 Round bead type | View on Amazon |
| MELLING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | VL1125 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.7L V6 Turbocharged | VL1140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 345024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Round Groove | View on Amazon |
| QUALCAST Fits: 2.7L V6 Turbocharged | 345143 | 🇺🇸 US | Intake and Exhaust3 Round Grooves | View on Amazon |
| SBI Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 1211104 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2200 Length | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | 1211140 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2000 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
8 Valve Spring Retainer Keeper parts for the 2021 Ford Bronco come from 4 brands — ENGINETECH, MELLING, QUALCAST and 1 other brand.
This group includes ENGINETECH EPF1104, ENGINETECH EPF1140 and MELLING VL1125 and the remaining parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 2.3L L4 Turbocharged | AVS4080 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| FEL-PRO Popular Fits: 2.3L L4 Turbocharged | SS72917 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | SS45968 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FluoroelastomerValve Stem Seal Outside Diameter | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | SS45969 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FluoroelastomerContains 8 PCS | View on Amazon |
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 026650 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Colour: BrownInner Diameter [MM]: 10,8 | View on Amazon |
| ELRING Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 026680 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Colour: GreenHeight [MM]: 18 | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | SS46115 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FluoroelastomerContains 24 PCS | View on Amazon |
| QUALCAST Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 38610555 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton Top Hat | View on Amazon |
| SBI Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 1221410 | 🇺🇸 US 🇨🇦 CA | IntakeViton Material | View on Amazon |
| SBI Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 1221411 | 🇺🇸 US 🇨🇦 CA | ExhaustViton Material | View on Amazon |
| SBI Fits: 2.7L V6 Turbocharged | 1221516 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Valve Stem Seal parts are listed for the 2021 Ford Bronco, from MAHLE / CLEVITE, SBI, ELRING and 3 other brands. APEX AVS4080 carries the "Popular" badge.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 2.7L V6 Turbocharged | VVS246 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HOLSTEIN Fits: 2.7L V6 Turbocharged | 2VTS0238 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 2.7L V6 Turbocharged | 5901217 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 2.7L V6 Turbocharged | 2T1193 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 2.7L V6 Turbocharged | VVT346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.3L L4 Turbocharged | VVT414 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Control | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2021 Ford Bronco, from STANDARD MOTOR PRODUCTS, GATES, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS VVT346 carries the "Popular" badge.
Economy: 4 parts, from GATES, HOLSTEIN, WALKER PRODUCTS and 1 other brand. A representative part number is GATES VVS246.
The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT346 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
This group includes STANDARD MOTOR PRODUCTS VVT346, GATES VVS246 and HOLSTEIN 2VTS0238 and the remaining parts above.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | B33858 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Variable Valve Timing (VVT) Solenoid GasketMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.7L V6 Turbocharged | B33509 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Variable Valve Timing (VVT) Solenoid GasketMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | 711337200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Variable Valve Timing (VVT) Solenoid Gasket / Seal parts for the 2021 Ford Bronco come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include MAHLE / CLEVITE B33858, MAHLE / CLEVITE B33509 and VICTOR REINZ 711337200.
Variable Valve Timing (VVT) Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.0L L4 Turbocharged, 2.3L L4 Turbocharged | VVT722 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.3L L4 Turbocharged | VVT721 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
STANDARD MOTOR PRODUCTS supplies both parts for the 2021 Ford Bronco.
Part numbers include STANDARD MOTOR PRODUCTS VVT722 and STANDARD MOTOR PRODUCTS VVT721.
Buying Engine Parts for a 2021 Ford Bronco
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Oil .
Frequently Asked Questions
How many engine parts fit the 2021 Ford Bronco?
Our catalog currently lists 317 engine parts for the 2021 Ford Bronco across 69 subcategories and 54 brands, covering all 4 engine options (1.5L L3 Turbocharged, 2.0L L4 Turbocharged, 2.3L L4 Turbocharged and 2.7L V6 Turbocharged). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2021 Ford Bronco engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2021 Ford Bronco?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2021 Ford Bronco?
Oil rows on this page include SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Ford Bronco was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2021 Ford Bronco?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2021 Ford Bronco
Engine Parts for Other Ford Bronco Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.