2022 Ford Expedition Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS TCA91.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TIMKEN FC66998.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts are listed for the 2022 Ford Expedition, from TIMKEN and NATIONAL.

This group includes NATIONAL 710950, TIMKEN SL260013 and TIMKEN SL260453.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

17 CV Axle parts are listed for the 2022 Ford Expedition, from APWI, TRAKMOTIVE, TOP NOTCH and 2 other brands. APWI FD8480 carries the "Popular" badge.

This table covers the CV Intermediate shafts. Read more

This group shows a single part: TRAKMOTIVE FD3524.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

MOTORCRAFT supplies the 4 CV Joint Boot parts for the 2022 Ford Expedition.

Listed part numbers: MOTORCRAFT TS262, MOTORCRAFT TS242 and MOTORCRAFT TS261, plus the other parts above.

This table covers the carriers that hold the differential gears in the axle. Read more

4 Differential Carrier parts are listed for the 2022 Ford Expedition, from MOTIVE GEAR, RICHMOND and AAM.

In the Economy grade, RICHMOND supplies 1 part: the catalog's value-priced group. A representative part number is RICHMOND XL5023.

The Standard Replacement section lists 3 options from MOTIVE GEAR and AAM — built to original-equipment specification. AAM 9L3Z4026H is listed in this group.

This group includes RICHMOND XL5023, AAM 9L3Z4026H and MOTIVE GEAR F975L and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts are listed for the 2022 Ford Expedition, from NSK and TIMKEN.

Listed part numbers: NSK R585U42 and TIMKEN LM104949.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2022 Ford Expedition — DORMAN 541010.

This table covers the Differential Carrier shims. Read more

5 Differential Carrier Shim parts for the 2022 Ford Expedition come from MOTIVE GEAR. The "Popular" part is MOTIVE GEAR SS12.

Listed part numbers: MOTIVE GEAR SS12, MOTIVE GEAR F88MSK and MOTIVE GEAR 1135R, plus the other parts above.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 Ford Expedition — MOTIVE GEAR 5122.

This table covers the Differential Cross pins. Read more

3 Differential Cross Pin parts for the 2022 Ford Expedition come from RICHMOND.

This group includes RICHMOND CSPF88E, RICHMOND 8002731 and RICHMOND 8002791.

This table covers the Differential Crush sleeves. Read more

This group shows a single part: MOTIVE GEAR BL3Z4662B.

This table covers the Differential Gear Installation kits. Read more

This group shows a single part: MOTIVE GEAR F88IKF.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: MOTORCRAFT DM2.

This table covers the bearings and races on the differential pinion. Read more

2 Differential Pinion Bearing / Race parts for the 2022 Ford Expedition come from MOTIVE GEAR.

Part numbers include MOTIVE GEAR R975FRLAPK and MOTIVE GEAR R975FRLATPK.

This table covers the baffles that control oil at the pinion bearings. Read more

3 Differential Pinion Bearing Baffle parts for the 2022 Ford Expedition come from 2 brands — MOTIVE GEAR and RICHMOND.

Part numbers include MOTIVE GEAR 4105, MOTIVE GEAR 4104 and RICHMOND 0400111.

This table covers the Differential Pinion nuts. Read more

MOTIVE GEAR supplies both parts for the 2022 Ford Expedition.

This group includes MOTIVE GEAR N811024S100 and MOTIVE GEAR FL3Z4320A.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2022 Ford Expedition — TIMKEN 3604.

This table covers the Differential Pinion shims. Read more

One part is listed for the 2022 Ford Expedition — MOTIVE GEAR 1136R.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

18 Differential Rebuild Kit parts for the 2022 Ford Expedition come from 5 brands — MOTIVE GEAR, RICHMOND, BCA and 2 other brands. The "Popular" part is MOTIVE GEAR R975FRLBMK.

The Master Kit section lists 11 options from MOTIVE GEAR, RICHMOND, BCA and 1 other brand — grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. MOTIVE GEAR R975FRLBMK is listed in this group.

In the Standard Kit grade, MOTIVE GEAR, BCA and SKF supply 7 parts: grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. A representative part number is MOTIVE GEAR R975FRLB.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

4 Differential Ring and Pinion parts are listed for the 2022 Ford Expedition, from MOTIVE GEAR and RICHMOND.

In the High Performance grade, MOTIVE GEAR supplies 1 part: engineered beyond original-equipment specification. A representative part number is MOTIVE GEAR F888IFS.

The Standard Replacement section: 3 options from RICHMOND and MOTIVE GEAR. MOTIVE GEAR F88L is listed in this group.

This group includes MOTIVE GEAR F888IFS, MOTIVE GEAR F88L and RICHMOND 4902101 and the remaining parts above.

This table covers the Differential Ring Gear bolts. Read more

One part is listed for the 2022 Ford Expedition — MOTIVE GEAR D5AZ4216A.

This table covers the Differential Spider gears. Read more

3 Differential Spider Gear parts are listed for the 2022 Ford Expedition, from RICHMOND, MOTIVE GEAR and USA STANDARD GEAR.

Economy: 1 part, from RICHMOND. A representative part number is RICHMOND XL4016.

The Standard Replacement section: 2 options from MOTIVE GEAR and USA STANDARD GEAR. MOTIVE GEAR F975BI is listed in this group.

This group includes RICHMOND XL4016, MOTIVE GEAR F975BI and USA STANDARD GEAR ZIKF975S34.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts for the 2022 Ford Expedition come from 4 brands — DORMAN, WJB / INMOTION PARTS, GSP and 1 other brand. The "Popular" part is DORMAN 986992.

Part numbers include DORMAN 986992, DORMAN 986506 and GSP PS901778, among others listed above.

This table covers the Drive Shaft bolts. Read more

One part is listed for the 2022 Ford Expedition — DORMAN 80992.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Drive Shaft Center Support Bearing parts for the 2022 Ford Expedition come from 2 brands — DEA / MARMON RIDE CONTROL and ANCHOR.

The Economy section: 2 options from DEA / MARMON RIDE CONTROL. DEA / MARMON RIDE CONTROL A60140 is listed in this group.

Standard Replacement: 2 parts, from ANCHOR. A representative part number is ANCHOR 6146.

Listed part numbers: DEA / MARMON RIDE CONTROL A60140, DEA / MARMON RIDE CONTROL A60146 and ANCHOR 6146, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

VALVOLINE supplies both parts for the 2022 Ford Expedition.

Part numbers include VALVOLINE 915052 and VALVOLINE 915053.

This table covers the Transfer Case control modules. Read more

This group shows a single part: MOTORCRAFT TM382.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

12 Transfer Case Fluid parts are listed for the 2022 Ford Expedition, from VALVOLINE, PENTOSIN, LUCAS OIL and 2 other brands. ACDELCO 109243 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, VALVOLINE and ACDELCO supply 3 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, VALVOLINE, LUCAS OIL and MOBIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING B16070.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

2 Transfer Case Motor parts for the 2022 Ford Expedition come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT MM1428 and MOTORCRAFT MM1423.

This table covers the Transfer Case Vent hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

One part is listed for the 2022 Ford Expedition — MOTORCRAFT KK62.

This table covers the U-joints in the driveshaft. Read more

12 Universal Joint parts are listed for the 2022 Ford Expedition, from DANA, GMB, FVP and 1 other brand. DANA 51350X carries the "Popular" badge.

Economy: 2 parts, from DANA. A representative part number is DANA 15178X.

The Heavy Duty section lists 5 options from DANA and GMB — rated for severe service. DANA 51350X is listed in this group.

The Standard Replacement section: 5 options from GMB, DANA, FVP and 1 other brand. GMB 2100178 is listed in this group.

This table covers the Universal Joint U-Bolt kits. Read more

This group shows a single part: MOTIVE GEAR MGUB1350.