2025 Ford Escape Engine Parts

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2025 Ford Escape — SCHAEFFLER SS2502.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2025 Ford Escape come from 2 brands — FEL-PRO and MOTORCRAFT.

Part numbers include FEL-PRO 26948PT and MOTORCRAFT CHG4.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

One part is listed for the 2025 Ford Escape — WELLS 5S17577.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2025 Ford Escape come from TECHPRO. Every part fits all 3 engine options (1.5L L3 Turbocharged, 2.0L L4 Turbocharged and 2.5L L4 ELECTRIC/GAS).

Part numbers include TECHPRO FO1228194 and TECHPRO FO1228178.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2025 Ford Escape, from MELLING, SBI and SKP.

Listed part numbers: MELLING V2007, SBI 02007 and SKP SKV2007.

This table covers the Harmonic Balancer bolts. Read more

2 Harmonic Balancer Bolt parts are listed for the 2025 Ford Escape, from DORMAN and SKP.

Listed part numbers: DORMAN 926885 and SKP SK926885.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2025 Ford Escape, from MELLING, QUALCAST and SBI.

This group includes MELLING V2006, QUALCAST 1030842 and SBI 02006.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

9 Motor Mount parts are listed for the 2025 Ford Escape, from DEA / MARMON RIDE CONTROL and ANCHOR.

Listed part numbers: ANCHOR 3620, ANCHOR 3710 and ANCHOR 3606, plus the other parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2025 Ford Escape — ANCHOR 301012.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

59 Oil parts are listed for the 2025 Ford Escape, from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 42 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

MOTORCRAFT supplies both parts for the 2025 Ford Escape.

Listed part numbers: MOTORCRAFT YOC23 and MOTORCRAFT YOC24.

This table covers the Oil Dipstick tubes. Read more

MOTORCRAFT supplies the 3 Oil Dipstick / Tube parts for the 2025 Ford Escape.

This group includes MOTORCRAFT EDPS83, MOTORCRAFT EDPS78 and MOTORCRAFT EDPS71.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2025 Ford Escape, from DORMAN and NEEDA.

Listed part numbers: DORMAN 097826, DORMAN 097826HPCD and DORMAN 097826HP, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2025 Ford Escape, from MOTORCRAFT and MOTORAD.

Listed part numbers: MOTORAD MO203, MOTORAD MO201 and MOTORCRAFT EC793, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

28 Oil Filter parts are listed for the 2025 Ford Escape, from WIX, FRAM, FVP and 10 other brands. WIX 51348XP carries the "Popular" badge. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 13 parts.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2025 Ford Escape come from 2 brands — SKP and SPECTRA PREMIUM.

This group includes SKP SK264372 and SPECTRA PREMIUM FP81A.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2025 Ford Escape — MELLING M352.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: MELLING 718F.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2025 Ford Escape — MELLING BT7016.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 2025 Ford Escape come from MOTORCRAFT.

Part numbers include MOTORCRAFT EEG1663 and MOTORCRAFT EEG1664.

This table covers the pickup tubes and screens that feed the oil pump. Read more

3 Oil Pump Pickup Tube / Screen parts for the 2025 Ford Escape come from 2 brands — MOTORCRAFT and MELLING.

Part numbers include MELLING 424S, MOTORCRAFT EPT1 and MOTORCRAFT EPT2.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: MELLING S1241.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 2025 Ford Escape — MELLING S898.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: MELLING 705.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

MELLING supplies the 4 Timing Chain & Component Kit parts for the 2025 Ford Escape.

Listed part numbers: MELLING 3705SIX, MELLING 3705SI and MELLING 3705SHX, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 2025 Ford Escape come from MELLING.

Part numbers include MELLING BG5515 and MELLING BT5513.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Chain Tensioner parts are listed for the 2025 Ford Escape, from INA, MELLING and PREFERRED COMPONENTS INC.

Listed part numbers: INA ZT0269, MELLING BT7051 and PREFERRED COMPONENTS INC T66003A.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts are listed for the 2025 Ford Escape, from INA and MELLING.

Part numbers include INA ZS0202, INA ZS0298 and MELLING S891.

This table covers the brackets that mount the Torque Strut. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2025 Ford Escape — DEA / MARMON RIDE CONTROL A20136.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts for the 2025 Ford Escape come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL. 1 part fits every engine; the other 3 are engine-specific.

This group includes ANCHOR 3564, ANCHOR 3573 and DEA / MARMON RIDE CONTROL A20119 and the remaining parts above.

This table covers the turbochargers that compress intake air. Read more

One part is listed for the 2025 Ford Escape — MOTORCRAFT TC73.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: WELLS 5S15716.

This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2025 Ford Escape — DORMAN 667445.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

MOTORCRAFT supplies the 3 Turbocharger Oil Line parts for the 2025 Ford Escape.

Part numbers include MOTORCRAFT OSL31, MOTORCRAFT OSL37 and MOTORCRAFT OSL35.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

8 Valve Lifter parts are listed for the 2025 Ford Escape, from MELLING, ENGINETECH, SBI and 1 other brand. MELLING JB7534 carries the "Popular" badge.

This group includes MELLING JB7534, ENGINETECH L5000 and MELLING JB7501 and the remaining parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: MELLING VS2496.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR715.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts for the 2025 Ford Escape come from 2 brands — MELLING and SBI.

Part numbers include MELLING VL1120, MELLING VL1125 and SBI 1211082, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2025 Ford Escape — SBI 1221411.