2026 Ford E-450 Engine Parts

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS TX365.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2026 Ford E-450 come from 2 brands — MELLING and QUALCAST.

Part numbers include MELLING V5830 and QUALCAST 1013512.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 2026 Ford E-450 come from 2 brands — MELLING and QUALCAST.

Listed part numbers: MELLING V5829 and QUALCAST 1013511.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MOTORCRAFT YOC32.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2026 Ford E-450 come from MOTORCRAFT.

This group includes MOTORCRAFT EDPS66 and MOTORCRAFT EDPST40.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2026 Ford E-450 come from 2 brands — MOTORAD and MOTORCRAFT.

This group includes MOTORAD MO201 and MOTORCRAFT EC791.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts for the 2026 Ford E-450 come from 6 brands — FRAM, VARIOUS MFR, MOBIL and 3 other brands. The "Popular" part is MOTORCRAFT FL820S.

The Economy section lists 2 options from FRAM and VARIOUS MFR — the catalog's value-priced group. FRAM FE2 is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1210A is listed in this group.

In the Standard Replacement grade, MOTORCRAFT, WIX, FRAM and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is MOTORCRAFT FL820S.

Part numbers include MOTORCRAFT FL820S, FRAM FE2 and VARIOUS MFR PG4651, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MELLING M589.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: MELLING BT7045.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

One part is listed for the 2026 Ford E-450 — MELLING MPR556.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2026 Ford E-450 — MELLING 1091.

This table covers the guides and dampers that keep the timing chain on its path. Read more

One part is listed for the 2026 Ford E-450 — MELLING BG7054.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: MELLING BT7044.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: MELLING S1286.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: QUALCAST 303229.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts for the 2026 Ford E-450 come from 2 brands — MELLING and QUALCAST.

The High Performance section lists 1 option from MELLING — engineered beyond original-equipment specification. MELLING 292110R is listed in this group.

Standard Replacement: 2 parts, from MELLING and QUALCAST. A representative part number is MELLING JB6600.

This group includes MELLING 292110R, MELLING JB6600 and QUALCAST 366600.

This table covers the Valve seats. Read more

QUALCAST supplies both parts for the 2026 Ford E-450.

Listed part numbers: QUALCAST 21175050N and QUALCAST 21218751.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

MELLING supplies both parts for the 2026 Ford E-450.

This group includes MELLING VS2497 and MELLING VS2498.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2026 Ford E-450 — MELLING VSR718.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2026 Ford E-450 — MELLING VL1083.