2026 Ford Transit Custom Engine Parts

Engine:
2.0L L4 DIESEL Turbocharged

11 Engine parts are listed for the 2026 Ford Transit Custom, in 1 part type, covering the 2.0L L4 DIESEL Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2026 Ford Transit Custom, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Every listed part is an Oil Filter.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP R0290
🇲🇽 MX
Original Equipment (OE) Part Number NU2Z6731F22X1.5MM Thread Size
View on
Amazon
FVP R1348
🇲🇽 MX
Spin-On Filter
Fitment notes — FVP R1348
Spin-On Filter
3/4-16 Thread Size
View on
Amazon
PRO-TEC PXL51348
🇲🇽 MX
Spin-On Filter
Fitment notes — PRO-TEC PXL51348
Spin-On Filter
3/4-16 Thread Size
View on
Amazon
PRO-TEC PXL10290
🇲🇽 MX
22x1.5mm Thread Size
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Popular M1212A
🇲🇽 MX
Extended Performance
View on
Amazon
WIX Popular 51348XP
🇲🇽 MX
XP Extreme DutyBest for Synthetic Motor Oils
Fitment notes — WIX 51348XP
XP Extreme DutyBest for Synthetic Motor OilsSpin-On Filter
3/4-16 Thread Size
View on
Amazon
WIX WL10290XP
🇲🇽 MX
XP Extreme DutyBest for Synthetic Motor Oils
Fitment notes — WIX WL10290XP
XP Extreme DutyBest for Synthetic Motor Oils
22x1.5mm Thread Size
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WIX Popular 51348
🇲🇽 MX
Spin-On Filter
Fitment notes — WIX 51348
Spin-On Filter
3/4-16 Thread Size
View on
Amazon
FVP R0290XL
🇲🇽 MX
Extended Life
Fitment notes — FVP R0290XL
Extended Life
Original Equipment (OE) Part Number NU2Z6731F22X1.5MM Thread Size
View on
Amazon
MANN W7015
🇲🇽 MX
Bypass Relief Valve Setting: 20 PSIHeight: 3.39 In
Fitment notes — MANN W7015
Bypass Relief Valve Setting: 20 PSIHeight: 3.39 InOuter Diameter Bottom: 2.99 InThread Size: 3/4-16 UNF-2B In
View on
Amazon
WIX WL10290
🇲🇽 MX
22x1.5mm Thread Size
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Buying Engine Parts for a 2026 Ford Transit Custom

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 2.0L L4 DIESEL Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2026 Ford Transit Custom?

Our catalog currently lists 11 engine parts for the 2026 Ford Transit Custom across 1 subcategory and 5 brands, covering the 2.0L L4 DIESEL Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2026 Ford Transit Custom?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Ford Transit Custom was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2026 Ford Transit Custom?

Every part on this page is matched to the 2.0L L4 DIESEL Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2026 Ford Transit Custom

Engine Parts for Other Ford Transit Custom Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.