7 Ignition parts are listed for the 1930 Franklin Model 145, in 4 part types, covering the 6cyl engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 1930 Franklin Model 145 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Distributor Rotor (3 parts), Spark Plug (2 parts) and Distributor Cap (1 part). The other 1 part type covers the remaining 1 part.
The 1930 Franklin Model 145 came with a single engine, the 6cyl, and every part is verified against it.
3 brands supply ignition parts for the 1930 Franklin Model 145, led by STANDARD MOTOR PRODUCTS (4 parts), CHAMPION (2 parts) and UNITED MOTOR PRODUCTS (1 part). Quality grades include Economy and Standard Replacement.
Each part number listed for the 1930 Franklin Model 145 opens a page with every vehicle that part fits.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | DR413 | 🇺🇸 US | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
One part is listed for the 1930 Franklin Model 145 — STANDARD MOTOR PRODUCTS DR413.
Distributor Rotor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | DR158T | 🇺🇸 US | T-Series | View on Amazon |
| UNITED MOTOR PRODUCTS | DR650 | 🇺🇸 US | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | DR158 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
3 Distributor Rotor parts are listed for the 1930 Franklin Model 145, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.
In the Economy grade, STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS supply 2 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS DR158T.
The Standard Replacement section lists 1 option from STANDARD MOTOR PRODUCTS — built to original-equipment specification. STANDARD MOTOR PRODUCTS DR158 is listed in this group.
This group includes STANDARD MOTOR PRODUCTS DR158T, UNITED MOTOR PRODUCTS DR650 and STANDARD MOTOR PRODUCTS DR158.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | DR2227PT | 🇺🇸 US | T-Series | View on Amazon |
This table covers the breaker points in a points-type distributor.
This group shows a single part: STANDARD MOTOR PRODUCTS DR2227PT.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION | 516 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 541 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
CHAMPION supplies both parts for the 1930 Franklin Model 145.
This group includes CHAMPION 516 and CHAMPION 541.
Buying Ignition Parts for a 1930 Franklin Model 145
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 6cyl engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Distributor Rotor and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1930 Franklin Model 145?
Our catalog currently lists 7 ignition parts for the 1930 Franklin Model 145 across 4 subcategories and 3 brands, covering the 6cyl engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1930 Franklin Model 145?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1930 Franklin Model 145?
Notes on this page include a 0.025" pre-set gap. Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1930 Franklin Model 145 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1930 Franklin Model 145?
Every part on this page is matched to the 6cyl engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1930 Franklin Model 145
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.