2018 Freightliner Sprinter 2500 Engine Parts

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING 125820.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2018 Freightliner Sprinter 2500 — KING ENGINE BEARINGS CR6876SV.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2018 Freightliner Sprinter 2500, from ELRING and AJUSA.

This group includes AJUSA 54161500, ELRING 790220 and ELRING 717570.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB4532XA.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2018 Freightliner Sprinter 2500 come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Crankshaft Seal parts for the 2018 Freightliner Sprinter 2500 come from 7 brands — ELRING, NATIONAL, WJB / INMOTION PARTS and 4 other brands. The "Popular" part is ELRING 424841.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2018 Freightliner Sprinter 2500, from AJUSA and ELRING.

Listed part numbers: AJUSA 81052400 and ELRING 372940.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2018 Freightliner Sprinter 2500, from AJUSA and ELRING. ELRING 475480 carries the "Popular" badge.

Part numbers include ELRING 475480, ELRING 475490 and AJUSA 10170900, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2018 Freightliner Sprinter 2500 — AJUSA 52366100.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2018 Freightliner Sprinter 2500 — AJUSA 50331200.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Intake Manifold Actuator parts are listed for the 2018 Freightliner Sprinter 2500, from DORMAN and PIERBURG.

This group includes DORMAN 911920 and PIERBURG 701132110.

This table covers the Intake Manifold Adjuster repair kits. Read more

3 Intake Manifold Adjuster Repair Kit parts are listed for the 2018 Freightliner Sprinter 2500, from SKP and DORMAN.

Listed part numbers: DORMAN 615907, SKP SKY01411 and SKP SKKIT159.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2018 Freightliner Sprinter 2500, from AJUSA, MAHLE / CLEVITE, ELRING and 2 other brands. MAHLE / CLEVITE MS19834 carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE MS19834, AJUSA 13211500 and AJUSA 16073300, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts for the 2018 Freightliner Sprinter 2500 come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER.

Part numbers include ANCHOR 9838, DEA / MARMON RIDE CONTROL A4046 and PIONEER 609838.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300118.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

25 Oil parts for the 2018 Freightliner Sprinter 2500 come from 4 brands — LIQUI MOLY, PENTOSIN, LUCAS OIL and 1 other brand. The "Popular" part is LIQUI MOLY 2004.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: REIN ECK0026.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Cooler Gasket parts are listed for the 2018 Freightliner Sprinter 2500, from AJUSA and ELRING.

Listed part numbers: AJUSA 77026800, AJUSA 77028800 and ELRING 524270, plus the other parts above.

This table covers the Oil Cooler Mounting kits. Read more

One part is listed for the 2018 Freightliner Sprinter 2500 — REIN ECK0025.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2018 Freightliner Sprinter 2500 come from 4 brands — ELRING, AGS, DORMAN and 1 other brand. The "Popular" part is AGS ODP00007.

Part numbers include AGS ODP00007, DORMAN 090164 and ELRING 303220, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2018 Freightliner Sprinter 2500, from DORMAN, ELRING and ULTRA-POWER.

Listed part numbers: DORMAN 65399 and ELRING 115100, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts for the 2018 Freightliner Sprinter 2500 come from 12 brands — CHAMP / LUBER-FINER, FVP, PRO-TEC and 9 other brands. The "Popular" part is HENGST E71HD141.

The Economy section lists 4 options from CHAMP / LUBER-FINER, FVP, PRO-TEC and 1 other brand — the catalog's value-priced group. CHAMP / LUBER-FINER P3969 is listed in this group.

In the Standard Replacement grade, HENGST, MAHLE / CLEVITE, MANN and 5 other brands supply 8 parts: built to original-equipment specification. A representative part number is HENGST E71HD141.

This table covers the Oil Filter covers. Read more

One part is listed for the 2018 Freightliner Sprinter 2500 — REIN CPL0075.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Filter Gasket parts are listed for the 2018 Freightliner Sprinter 2500, from AJUSA and ÜRO PARTS.

Listed part numbers: AJUSA 01140700, AJUSA 01681100 and ÜRO PARTS 6421801410R.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Filter Housing Seal parts for the 2018 Freightliner Sprinter 2500 come from 2 brands — ELRING and DORMAN.

Listed part numbers: DORMAN 926365, ELRING 588480 and ELRING 066090.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2018 Freightliner Sprinter 2500, from DORMAN, REIN, SKP and 1 other brand.

This group includes DORMAN 264286, REIN ESK0184 and SKP SKMDP12A and the remaining parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Freightliner Sprinter 2500 — ELRING 540930.

This table covers the Timing Chain Tensioner O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ELRING 079820.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 16506200.

This table covers the turbochargers that compress intake air. Read more

4 Turbocharger parts for the 2018 Freightliner Sprinter 2500 come from 3 brands — ROTOMASTER, GPD and STANDARD MOTOR PRODUCTS.

The New section lists 3 options from GPD, ROTOMASTER and STANDARD MOTOR PRODUCTS — brand-new units rather than rebuilt ones. GPD 2511430 is listed in this group.

The Remanufactured section lists 1 option from ROTOMASTER — factory-rebuilt units with new wear components. ROTOMASTER A8200103R is listed in this group.

Listed part numbers: GPD 2511430, ROTOMASTER A1220104N and STANDARD MOTOR PRODUCTS TBC602, plus the other parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Turbocharger Gasket parts are listed for the 2018 Freightliner Sprinter 2500, from ELRING and AJUSA.

This group includes AJUSA JTC11791, ELRING 129031 and ELRING 738470.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2018 Freightliner Sprinter 2500 — ELRING 309980.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: AJUSA 01141100.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 75000400.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85009300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 57057800.