2019 Freightliner Cascadia Steering Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2019 Freightliner Cascadia has 14 steering parts with verified fitment on this page — 5 part types and 6 brands, covering all 3 engine options (11.9L Turbocharged, 14.8L L6 DIESEL Turbocharged and 15.6L DIESEL Turbocharged). Each part includes a manufacturer part number and application notes.

The steering system on the 2019 Freightliner Cascadia connects driver to road through the rack, pump, tie rods, and column components. The largest groups are King Pin Set (6 parts), Power Steering Filter (4 parts) and O-Ring (2 parts). The other 2 part types cover the remaining 2 parts.

King Pin Repair Kit

Brand Part Number Markets Notes Buy
DAYTON Fits: all 2019 Cascadia engines 300414
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Detroit Alliance Front Axle
View on
Amazon

This table covers the King Pin repair kits.

King Pin Set

Brand Part Number Markets Notes Buy
MEVOTECH Popular Fits: all 2019 Cascadia engines MS95988
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Supreme
Fitment notes — MEVOTECH MS95988
Supreme
FrontDouble lock opposite side8.84 IN Length1.7935 IN Pin Diameterwith Roller BearingComposite Bushing
View on
Amazon
MEVOTECH Popular Fits: all 2019 Cascadia engines MS95987
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Supreme
Fitment notes — MEVOTECH MS95987
Supreme
FrontDouble lock opposite side8.84 IN Length1.7935 IN Pin Diameterwith Roller BearingBi-Metal Bushing
View on
Amazon
MEVOTECH Fits: all 2019 Cascadia engines MS95996
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Supreme
Fitment notes — MEVOTECH MS95996
Supreme
FrontDouble lock opposite side10.406 IN Length1.7935 IN Pin Diameterwith Roller BearingComposite Bushing
View on
Amazon
MEVOTECH Fits: all 2019 Cascadia engines MS95989
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SupremeContains Pre-Sized Metal Bushings
Fitment notes — MEVOTECH MS95989
SupremeContains Pre-Sized Metal Bushings
FrontDouble lock opposite side8.84 IN Length1.7935 IN Pin Diameterwith Roller Bearingwith Screwithoutn Cap
View on
Amazon
MEVOTECH Fits: all 2019 Cascadia engines MS959106
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SupremeContains Pre-Sized BI-Metal Bushings
Fitment notes — MEVOTECH MS959106
SupremeContains Pre-Sized BI-Metal Bushings
FrontDouble Lock Same Side9.07 IN Length1.872 IN Pin Diameterwith Roller Bearing
View on
Amazon
MEVOTECH Fits: all 2019 Cascadia engines MS959105
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Supreme
Fitment notes — MEVOTECH MS959105
Supreme
FrontDouble Lock Same Side9.07 IN Length1.872 IN Pin Diameterwith Roller BearingComposite Bushing
View on
Amazon

This table covers the King Pin sets.

O-Ring

Brand Part Number Markets Notes Buy
ELRING Fits: 14.8L L6 DIESEL Turbocharged 653770
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Inner Diameter [MM]: 155
View on
Amazon
ELRING Fits: 14.8L L6 DIESEL Turbocharged 653760
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Inner Diameter [MM]: 138.5
View on
Amazon

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Power Steering Filter

Daily Driver

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN Fits: 15.6L DIESEL Turbocharged PT23629
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WIX Fits: 15.6L DIESEL Turbocharged 57191
🇺🇸 US 🇨🇦 CA
Spin-On Filter
View on
Amazon
Brand Part Number Markets Notes Buy
DONALDSON Fits: 14.8L L6 DIESEL Turbocharged, 15.6L DIESEL Turbocharged P573482
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Outer Diameter: 67.5 mm (2.66")Length: 89.1 mm (3.51")
Fitment notes — DONALDSON P573482
Outer Diameter: 67.5 mm (2.66")Length: 89.1 mm (3.51")Thread Size: 3/4-16 UN
Engine Code DD16Detroit Diesel engine
View on
Amazon
HASTINGS / BALDWIN Fits: 11.9L Turbocharged, 14.8L L6 DIESEL Turbocharged PT23629
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Power Steering filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.

Steering Gear Housing Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 14.8L L6 DIESEL Turbocharged 651250
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the seals at the Steering Gear Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Steering Parts for a 2019 Freightliner Cascadia

On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.

  • Match the engine first. Some steering parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: King Pin Set and Power Steering Filter .

Frequently Asked Questions

How many steering parts fit the 2019 Freightliner Cascadia?

Our catalog currently lists 14 steering parts for the 2019 Freightliner Cascadia across 5 subcategories and 6 brands, covering all 3 engine options (11.9L Turbocharged, 14.8L L6 DIESEL Turbocharged and 15.6L DIESEL Turbocharged). Each part is matched to the engine(s) it fits.

Do steering parts differ between 2019 Freightliner Cascadia engines?

Some do. 7 parts fit every engine; the other 7 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of steering problems on a 2019 Freightliner Cascadia?

Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Freightliner Cascadia was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2019 Freightliner Cascadia?

First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2019 Freightliner Cascadia

Steering Parts for Other Freightliner Cascadia Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.