2026 Freightliner MT Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

7 Engine parts are listed for the 2026 Freightliner MT, in 1 part type, covering both the 6.6L V8 and the 6.7L L6 DIESEL Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 2026 Freightliner MT covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Every listed part is an Oil Filter.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
PUROLATOR Fits: 6.6L V8 TL22500
🇺🇸 US 🇨🇦 CA
Bypass Relief Valve Setting: 22 PSIMedia Material: Cellulose
Fitment notes — PUROLATOR TL22500
Bypass Relief Valve Setting: 22 PSIMedia Material: Cellulose
MT45
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WIX Popular Fits: 6.6L V8 WL10255
🇺🇸 US 🇨🇦 CA
Fits MT45
Fitment notes — WIX WL10255
Fits:
MT45
or:
MT55
View on
Amazon
HASTINGS / BALDWIN Fits: 6.6L V8 LF641
🇺🇸 US 🇨🇦 CA
View on
Amazon
Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN Fits: 6.7L L6 DIESEL Turbocharged LF551
🇺🇸 US 🇨🇦 CA
View on
Amazon
PUROLATOR Fits: 6.6L V8 2500BP
🇺🇸 US 🇨🇦 CA
MT45
View on
Amazon
PUROLATOR Fits: 6.6L V8 TL22500BP
🇺🇸 US 🇨🇦 CA
Bypass Relief Valve Setting: 22 PSIMedia Material: Cellulose
Fitment notes — PUROLATOR TL22500BP
Bypass Relief Valve Setting: 22 PSIMedia Material: Cellulose
MT45
View on
Amazon
WIX Fits: 6.7L L6 DIESEL Turbocharged 57182
🇺🇸 US 🇨🇦 CA
Spin-On FilterSpin-On Lube Filter
Fitment notes — WIX 57182
Spin-On FilterSpin-On Lube Filter
Fits:
or MT45
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Buying Engine Parts for a 2026 Freightliner MT

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2026 Freightliner MT?

Our catalog currently lists 7 engine parts for the 2026 Freightliner MT across 1 subcategory and 3 brands, covering both the 6.6L V8 and the 6.7L L6 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2026 Freightliner MT engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2026 Freightliner MT?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Freightliner MT was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2026 Freightliner MT?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2026 Freightliner MT

Engine Parts for Other Freightliner MT Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.