The 2022 Genesis GV80 has 9 wheel parts with verified fitment on this page — 2 part types and 5 brands, covering both the 2.5L L4 Turbocharged and the 3.5L V6 Turbocharged. Each part includes a manufacturer part number and application notes.
On the 2022 Genesis GV80, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 9 listed parts are Tire Pressure Monitoring System (TPMS) Sensor (5 parts) and Tire Pressure Monitoring System (TPMS) Stem / Service Kit (4 parts).
The 2022 Genesis GV80 was sold with both the 2.5L L4 Turbocharged and the 3.5L V6 Turbocharged. All 9 parts on this page fit every engine.
5 brands supply wheel parts for the 2022 Genesis GV80, led by VDO / CONTINENTAL (3 parts), SCHRADER (2 parts) and BOSCH (2 parts), plus 2 more brands. Quality grades include OE Replacement, Valve Stem Assembly and Aftermarket / Multi-Application.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2022 Genesis GV80. 1 part has it: BH SENS RDE044V21 (Tire Pressure Monitoring System (TPMS) Sensor). Each part number opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VDO / CONTINENTAL Fits: all 2022 GV80 engines | SE10008 | 🇺🇸 US 🇨🇦 CA | Redi-Sensor433.92 MHz | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Popular Fits: all 2022 GV80 engines | RDE044V21 | 🇺🇸 US 🇨🇦 CA | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
| SCHRADER Fits: all 2022 GV80 engines | 29296 | 🇺🇸 US 🇨🇦 CA | Programmed | View on Amazon |
| SCHRADER Fits: all 2022 GV80 engines | 29109 | 🇺🇸 US 🇨🇦 CA | ProgrammedIncludes Mounting Hardware | View on Amazon |
| VDO / CONTINENTAL Fits: all 2022 GV80 engines | SE55923 | 🇺🇸 US 🇨🇦 CA | Continental OE Sensor433.92 MHz | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
5 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2022 Genesis GV80, from VDO / CONTINENTAL, SCHRADER and BH SENS. BH SENS RDE044V21 carries the "Popular" badge. All of them fit every engine offered in the 2022 GV80.
In the Aftermarket / Multi-Application (Programmed) grade, VDO / CONTINENTAL supplies 1 part: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is VDO / CONTINENTAL SE10008.
The OE Replacement (Programmed) section lists 4 options from SCHRADER, BH SENS and VDO / CONTINENTAL — manufactured to match the original-equipment part in form, fit and function. BH SENS RDE044V21 is listed in this group.
Part numbers include BH SENS RDE044V21, VDO / CONTINENTAL SE10008 and SCHRADER 29296, among others listed above.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VDO / CONTINENTAL Fits: all 2022 GV80 engines | SE54190 | 🇺🇸 US 🇨🇦 CA | OE and Redi Sensor Kit433.92 MHz or 315 MHz | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: all 2022 GV80 engines | QFP085 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
| BOSCH Fits: all 2022 GV80 engines | QFP086 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System (TPMS) Sensor | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DILL AIR CONTROL Fits: all 2022 GV80 engines | 7020K | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitOE KIT (2PC SEAL AND WASHER) | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
4 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2022 Genesis GV80 come from 3 brands — BOSCH, VDO / CONTINENTAL and DILL AIR CONTROL. Every part fits both the 2.5L L4 Turbocharged and the 3.5L V6 Turbocharged.
The Hardware Only section lists 1 option from VDO / CONTINENTAL — grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. VDO / CONTINENTAL SE54190 is listed in this group.
In the Valve Stem Assembly grade, BOSCH supplies 2 parts: grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. A representative part number is BOSCH QFP085.
1 further part sits outside the graded sections, with the same engine-level match.
Part numbers include VDO / CONTINENTAL SE54190, BOSCH QFP085 and BOSCH QFP086, among others listed above.
Buying Wheel Parts for a 2022 Genesis GV80
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- You do not need to pick an engine: every wheel part on this page fits both the 2.5L L4 Turbocharged and the 3.5L V6 Turbocharged.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Sensor and Tire Pressure Monitoring System (TPMS) Stem / Service Kit .
Frequently Asked Questions
How many wheel parts fit the 2022 Genesis GV80?
Our catalog currently lists 9 wheel parts for the 2022 Genesis GV80 across 2 subcategories and 5 brands, covering both the 2.5L L4 Turbocharged and the 3.5L V6 Turbocharged. Each part is matched to the engine(s) it fits.
Do wheel parts differ between 2022 Genesis GV80 engines?
No. On this page every wheel part fits both the 2.5L L4 Turbocharged and the 3.5L V6 Turbocharged. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of wheel problems on a 2022 Genesis GV80?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 Genesis GV80 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2022 Genesis GV80?
Every part on this page already fits both the 2.5L L4 Turbocharged and the 3.5L V6 Turbocharged. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2022 Genesis GV80
Wheel Parts for Other Genesis GV80 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.