1992 Geo Storm Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 1992 Geo Storm, from BCA, NATIONAL, SKF and 1 other brand.

Listed part numbers: BCA NS99157, NATIONAL 99157 and SKF 99114, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Camshaft Seal parts are listed for the 1992 Geo Storm, from BCA, NATIONAL, APEX and 5 other brands. BCA NS710308 carries the "Popular" badge.

Listed part numbers: BCA NS710308, NATIONAL 710308 and APEX ATC3000, plus the other parts above.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRIS8.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 1992 Geo Storm come from 5 brands — ITM ENGINE COMPONENTS, BECK/ARNLEY, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ITM ENGINE COMPONENTS 4B9450.

This group includes ITM ENGINE COMPONENTS 4B9450, BECK/ARNLEY 0146557 and KING ENGINE BEARINGS CR4004AM and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 1992 Geo Storm come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 54069600, APEX ACS3001 and FEL-PRO CS9685, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts are listed for the 1992 Geo Storm, from TOPLINE, ITM ENGINE COMPONENTS and MAHLE / CLEVITE.

Part numbers include ITM ENGINE COMPONENTS 5M9423, MAHLE / CLEVITE MS1820A and TOPLINE TWIS8, among others listed above.

This table covers the gaskets that seal the Crankshaft Main Bearing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO BS40608.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 1992 Geo Storm, from NATIONAL, SCHAEFFLER, TIMKEN and 1 other brand.

Part numbers include NATIONAL 99128, SCHAEFFLER SR3467 and TIMKEN KWK99128, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts are listed for the 1992 Geo Storm, from FEL-PRO, APEX, CORTECO and 4 other brands. FEL-PRO TCS45853 carries the "Popular" badge.

Listed part numbers: FEL-PRO TCS45853, FEL-PRO BS40524 and APEX ATC3011, plus the other parts above.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: PIONEER PC725.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 1992 Geo Storm come from PIONEER.

Part numbers include PIONEER PG416 and PIONEER S160.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 1992 Geo Storm come from 5 brands — OMNI 5, AJUSA, APEX and 2 other brands. The "Popular" part is OMNI 5 PWC41943.

Part numbers include OMNI 5 PWC41943, AJUSA 10086300 and APEX AHG302, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 1992 Geo Storm come from 6 brands — FEL-PRO, APEX, AJUSA and 3 other brands. The "Popular" part is APEX AHS3002.

Part numbers include APEX AHS3002, FEL-PRO HIS9684PT and AJUSA 52119100, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 1992 Geo Storm — GM GENUINE 94029588.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1992 Geo Storm come from MELLING.

Part numbers include MELLING CSL609 and MELLING CSL709.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 1992 Geo Storm.

Listed part numbers: KAT'S HEATERS 11402 and KAT'S HEATERS 16500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 1992 Geo Storm come from 4 brands — AJUSA, APEX, ITM ENGINE COMPONENTS and 1 other brand.

This group includes AJUSA 50132700, APEX AFS3002 and ITM ENGINE COMPONENTS 0901935 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 1992 Geo Storm, from ITM ENGINE COMPONENTS and TOPLINE.

Part numbers include ITM ENGINE COMPONENTS RX9539 and TOPLINE EVIS10.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

10 Expansion Plug parts for the 1992 Geo Storm come from 4 brands — DORMAN, QUALCAST, PIONEER and 1 other brand. The "Popular" part is DORMAN 555093.

This table covers the Intake Manifold bolts. Read more

This group shows a single part: GM GENUINE 11515754.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 1992 Geo Storm come from 5 brands — AJUSA, CORTECO, FEL-PRO and 2 other brands. The "Popular" part is CORTECO 23574.

Listed part numbers: CORTECO 23574, FEL-PRO MS94501 and AJUSA 00678100, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 1992 Geo Storm, from BECK/ARNLEY, ITM ENGINE COMPONENTS and TOPLINE.

Listed part numbers: BECK/ARNLEY 0213350, ITM ENGINE COMPONENTS RV9536 and TOPLINE IVIS10.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

19 Oil parts are listed for the 1992 Geo Storm, from MOBIL and VALVOLINE. MOBIL 125195 carries the "Popular" badge.

In the Full Synthetic grade, MOBIL and VALVOLINE supply 7 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 8 options from VALVOLINE and MOBIL — oils grouped for high-mileage engines. VALVOLINE VV1556 is listed in this group.

In the Synthetic Blend grade, MOBIL and VALVOLINE supply 4 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 1992 Geo Storm, from DORMAN, AGS and SKP. DORMAN 090033 carries the "Popular" badge.

The Piggyback section lists 1 option from DORMAN — grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. DORMAN 65229 is listed in this group.

The Twist Drain section lists 1 option from DORMAN — grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. DORMAN 092020 is listed in this group.

The Universal section lists 1 option from DORMAN — grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. DORMAN 65102 is listed in this group.

5 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: DORMAN 090033, DORMAN 65229 and DORMAN 092020, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts for the 1992 Geo Storm come from 4 brands — AJUSA, DORMAN, FEL-PRO and 1 other brand.

Part numbers include AJUSA 21012700, DORMAN 097026 and FEL-PRO 73351, among others listed above.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 1992 Geo Storm — MOTORAD MO101.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts are listed for the 1992 Geo Storm, from BOSCH, VARIOUS MFR, WIX and 8 other brands. WIX 51334XP carries the "Popular" badge.

In the Economy grade, BOSCH, CHAMP / LUBER-FINER, FRAM and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, WIX supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section lists 7 options from BOSCH, WIX, ACDELCO and 4 other brands — built to original-equipment specification. BOSCH 3312 is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 1992 Geo Storm, from VICTOR REINZ, AJUSA, APEX and 1 other brand. VICTOR REINZ 703141410 carries the "Popular" badge.

This group includes VICTOR REINZ 703141410, AJUSA 14023800 and APEX AOP300 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 1992 Geo Storm, from ITM ENGINE COMPONENTS, MELLING and TOPLINE.

This group includes ITM ENGINE COMPONENTS 0571285, MELLING M218 and TOPLINE OPIS10.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

2 Oil Pump Repair Sleeve parts for the 1992 Geo Storm come from 2 brands — SCHAEFFLER and TIMKEN.

Listed part numbers: SCHAEFFLER SR3467 and TIMKEN KWK99128.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts for the 1992 Geo Storm come from 2 brands — SCHAEFFLER and TIMKEN.

This group includes SCHAEFFLER SS2344 and TIMKEN 223235.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts for the 1992 Geo Storm come from 3 brands — ITM ENGINE COMPONENTS, SILV-O-LITE and TOPLINE.

This group includes ITM ENGINE COMPONENTS RY6694, SILV-O-LITE 3414H and TOPLINE PAIS10.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1992 Geo Storm come from 4 brands — HASTINGS MANUFACTURING, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is MAHLE / CLEVITE 41592CP.

In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 41592CP.

Standard Replacement: 4 parts, from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4647.

Part numbers include MAHLE / CLEVITE 41592CP, HASTINGS MANUFACTURING 2C4647 and HASTINGS MANUFACTURING 2C4647S, among others listed above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 1992 Geo Storm — TOPLINE RAIS10.

This table covers the Rocker Arm shafts. Read more

TOPLINE supplies both parts for the 1992 Geo Storm.

Part numbers include TOPLINE RASIIS10 and TOPLINE RASEIS10.

This table covers the Thrust washers. Read more

One part is listed for the 1992 Geo Storm — ITM ENGINE COMPONENTS 1T4405.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

9 Timing Belt parts for the 1992 Geo Storm come from 8 brands — CONTINENTAL, CADNA, ITM ENGINE COMPONENTS and 5 other brands. The "Popular" part is CONTINENTAL T177.

The Economy section: 2 options from CADNA and ITM ENGINE COMPONENTS. CADNA TB177 is listed in this group.

Standard Replacement: 7 parts, from CONTINENTAL, GATES, BECK/ARNLEY and 3 other brands. A representative part number is CONTINENTAL T177.

This group includes CONTINENTAL T177, CADNA TB177 and ITM ENGINE COMPONENTS 4260 and the remaining parts above.

This table covers the Timing Belt & component kits. Read more

6 Timing Belt & Component Kit parts are listed for the 1992 Geo Storm, from GMB, CLOYES, ULTRA-POWER and 2 other brands. GATES TCKWP177 carries the "Popular" badge.

Economy: 2 parts, from CLOYES and ULTRA-POWER. A representative part number is CLOYES BK176.

The Standard Replacement section: 4 options from GMB, GATES and US MOTOR WORKS. GATES TCKWP177 is listed in this group.

This group includes GATES TCKWP177, CLOYES BK176 and ULTRA-POWER TCK177 and the remaining parts above.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

7 Timing Belt Tensioner parts are listed for the 1992 Geo Storm, from CLOYES, GMB, INA and 3 other brands. CLOYES 95277 carries the "Popular" badge.

Listed part numbers: CLOYES 95277, CLOYES 95135 and GMB 4409520, plus the other parts above.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 1992 Geo Storm — CLOYES S622.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 1992 Geo Storm — SKF 99128.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Timing Cover Seal parts are listed for the 1992 Geo Storm, from ITM ENGINE COMPONENTS and SKF.

This group includes ITM ENGINE COMPONENTS 1500519, ITM ENGINE COMPONENTS 1500120 and SKF 12706.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 1992 Geo Storm, from FEL-PRO, OMNI 5, APEX and 3 other brands. FEL-PRO VS50053R carries the "Popular" badge.

Listed part numbers: FEL-PRO VS50053R, OMNI 5 PWC30112 and APEX AVC302, plus the other parts above.

This table covers the Valve Cover grommets. Read more

One part is listed for the 1992 Geo Storm — DORMAN 42502.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

8 Valve Guide parts are listed for the 1992 Geo Storm, from ITM ENGINE COMPONENTS, QUALCAST, BECK/ARNLEY and 1 other brand. ITM ENGINE COMPONENTS VG1098CI carries the "Popular" badge.

Part numbers include ITM ENGINE COMPONENTS VG1098CI, QUALCAST 308189 and BECK/ARNLEY 0221611, among others listed above.

This table covers the Valve seats. Read more

5 Valve Seat parts for the 1992 Geo Storm come from 3 brands — SBI, QUALCAST and DURA-BOND. The "Popular" part is SBI SB118752.

Listed part numbers: SBI SB118752, DURA-BOND 31064 and QUALCAST 21118752, plus the other parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: ITM ENGINE COMPONENTS VS1499.

This table covers the Valve Spring retainers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 051257.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: SBI 1211074.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Valve Stem Seal parts are listed for the 1992 Geo Storm, from AJUSA, ENGINETECH, APEX and 6 other brands. AJUSA 12007900 carries the "Popular" badge.

Listed part numbers: AJUSA 12007900, ENGINETECH S475V and APEX AVS3002, plus the other parts above.