1996 Geo Prizm Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts are listed for the 1996 Geo Prizm, from ITM ENGINE COMPONENTS and TOPLINE.

Part numbers include ITM ENGINE COMPONENTS 0564961 and TOPLINE CAMTO29I.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts for the 1996 Geo Prizm come from 4 brands — BCA, NATIONAL, TIMKEN and 1 other brand.

Part numbers include BCA NS99139, NATIONAL 99139 and TIMKEN KWK99139, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 1996 Geo Prizm come from 14 brands — FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 11 other brands. The "Popular" part is FEL-PRO TCS45592.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 1996 Geo Prizm, from BECK/ARNLEY, MAHLE / CLEVITE, SEALED POWER and 1 other brand.

This group includes BECK/ARNLEY 0146564, MAHLE / CLEVITE CB1786A and SEALED POWER 44820A and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 1996 Geo Prizm, from APEX, ENGINETECH, AJUSA and 3 other brands. APEX ACS8034 carries the "Popular" badge.

Part numbers include APEX ACS8034, ENGINETECH TO18CSC and AJUSA 54091900, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 1996 Geo Prizm come from 3 brands — TOPLINE, ITM ENGINE COMPONENTS and MAHLE / CLEVITE.

This group includes ITM ENGINE COMPONENTS 5M9310, MAHLE / CLEVITE MS2211A and TOPLINE MBTO18 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 1996 Geo Prizm come from 4 brands — WJB / INMOTION PARTS, NATIONAL, FEL-PRO and 1 other brand. The "Popular" part is NATIONAL 99128.

Part numbers include NATIONAL 99128, FEL-PRO 16277 and VICTOR REINZ 711641300, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Crankshaft Seal parts for the 1996 Geo Prizm come from 9 brands — FEL-PRO, WJB / INMOTION PARTS, AJUSA and 6 other brands. The "Popular" part is FEL-PRO TCS45955.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts are listed for the 1996 Geo Prizm, from BECK/ARNLEY, ENGINETECH, APEX and 4 other brands. BECK/ARNLEY 0161005 carries the "Popular" badge.

Part numbers include BECK/ARNLEY 0161005, ENGINETECH HB152 and APEX AHB808, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 1996 Geo Prizm, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AHG834 carries the "Popular" badge.

Listed part numbers: APEX AHG834, FEL-PRO 9955PT and AJUSA 10088600, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 1996 Geo Prizm, from FEL-PRO, APEX, AJUSA and 1 other brand. APEX AHS8034 carries the "Popular" badge.

This group includes APEX AHS8034, AJUSA 52122900 and FEL-PRO HS9955PT and the remaining parts above.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 1996 Geo Prizm.

Part numbers include MELLING CSL151 and MELLING CSL251.

This table covers the Engine covers. Read more

TECHPRO supplies the 3 Engine Cover parts for the 1996 Geo Prizm.

Part numbers include TECHPRO GM1228116, TECHPRO GM1228117 and TECHPRO GM1228118.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 1996 Geo Prizm, from APEX, ENGINETECH and TOPLINE.

Part numbers include APEX AFS8034, ENGINETECH TO18K2 and TOPLINE CGSTO29.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 1996 Geo Prizm come from 4 brands — ENGINETECH, QUALCAST, SBI and 1 other brand.

Part numbers include ENGINETECH EM2739, QUALCAST 1010507 and SBI 10507, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

9 Expansion Plug parts are listed for the 1996 Geo Prizm, from DORMAN, QUALCAST and TOPLINE. DORMAN 555093 carries the "Popular" badge.

Part numbers include DORMAN 555093, DORMAN 565095 and DORMAN 570004, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 1996 Geo Prizm, from SKP, ATP, DAYCO and 2 other brands. SKP SK594182 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594182.

The Standard Replacement section lists 4 options from ATP, DAYCO, DORMAN and 1 other brand — built to original-equipment specification. ATP 102157 is listed in this group.

Listed part numbers: SKP SK594182, ATP 102157 and DAYCO PB1153N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 1996 Geo Prizm, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS95516 carries the "Popular" badge.

Part numbers include FEL-PRO MS95516, AJUSA 13102800 and APEX AMS8330, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 1996 Geo Prizm come from 5 brands — ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 2 other brands. The "Popular" part is ENGINETECH IM2736.

Part numbers include ENGINETECH IM2736, ITM ENGINE COMPONENTS RV9552 and QUALCAST 1010506, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

19 Motor Mount parts for the 1996 Geo Prizm come from 5 brands — DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 2 other brands. The "Popular" part is SKP SKM8177.

The Economy section: 3 options from SKP. SKP SKM8177 is listed in this group.

Standard Replacement: 16 parts, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. A representative part number is DEA / MARMON RIDE CONTROL A6260.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL AM263.

This table covers the Motor Mount kits. Read more

5 Motor Mount Kit parts for the 1996 Geo Prizm come from 3 brands — SKP, ANCHOR and DEA / MARMON RIDE CONTROL. The "Popular" part is SKP SKM3054K.

This group includes SKP SKM3054K, ANCHOR 301314 and DEA / MARMON RIDE CONTROL MK5204 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

22 Oil parts for the 1996 Geo Prizm come from 3 brands — MOBIL, VALVOLINE and IDEMITSU. The "Popular" part is MOBIL 125195.

The Conventional section lists 3 options from VALVOLINE — grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. VALVOLINE 797578 is listed in this group.

The Full Synthetic section lists 8 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 8 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 103767.

The Racing section lists 1 option from IDEMITSU — grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. IDEMITSU 30018100750 is listed in this group.

The Synthetic Blend section lists 2 options from MOBIL — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 1996 Geo Prizm come from 2 brands — DORMAN and AGS.

Part numbers include AGS ODP00011, DORMAN 851321 and DORMAN 090049.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 1996 Geo Prizm, from MAHLE / CLEVITE, APEX, DORMAN and 2 other brands. MAHLE / CLEVITE 2051 carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE 2051, APEX ADP1902 and DORMAN 097127, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 1996 Geo Prizm come from 5 brands — MOTORAD, BECK/ARNLEY, GATES and 2 other brands. The "Popular" part is MOTORAD MO80.

Listed part numbers: MOTORAD MO80, BECK/ARNLEY 0160053 and GATES 31081, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 1996 Geo Prizm come from 13 brands — BOSCH, FRAM, VARIOUS MFR and 10 other brands. The "Popular" part is MOBIL M1103A.

The Economy section: 6 options from FRAM, BOSCH, FVP and 2 other brands. BOSCH 72229WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1103A is listed in this group.

Standard Replacement: 9 parts, from ACDELCO, DENSO, WIX and 6 other brands. A representative part number is ACDELCO PF1233.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 1996 Geo Prizm come from 4 brands — VICTOR REINZ, APEX, FEL-PRO and 1 other brand. The "Popular" part is VICTOR REINZ 703141410.

Listed part numbers: VICTOR REINZ 703141410, APEX AOP834 and FEL-PRO OS30917C, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts for the 1996 Geo Prizm come from 3 brands — TOPLINE, SKP and MELLING.

The Economy section: 1 option from SKP. SKP SKOM185 is listed in this group.

Standard Replacement: 2 parts, from MELLING and TOPLINE. A representative part number is MELLING M217.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: SKP SKOM185, MELLING M217 and TOPLINE OPTO29, plus the other parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1996 Geo Prizm — TOPLINE PATO29.

This table covers the rings that seal each piston to the cylinder wall. Read more

7 Piston Ring parts are listed for the 1996 Geo Prizm, from HASTINGS MANUFACTURING, SEALED POWER, MAHLE / CLEVITE and 1 other brand. SEALED POWER E645KC carries the "Popular" badge.

The Premium section lists 2 options from SEALED POWER and MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER E645KC is listed in this group.

The Standard Replacement section: 5 options from HASTINGS MANUFACTURING and TOPLINE. HASTINGS MANUFACTURING 2C4733 is listed in this group.

Listed part numbers: SEALED POWER E645KC, MAHLE / CLEVITE 41697 and HASTINGS MANUFACTURING 2C4733, plus the other parts above.

This table covers the Thrust washers. Read more

2 Thrust Washer parts for the 1996 Geo Prizm come from 2 brands — ENGINETECH and MAHLE / CLEVITE.

Part numbers include ENGINETECH TW1400 and MAHLE / CLEVITE TW401S.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

11 Timing Belt parts are listed for the 1996 Geo Prizm, from GATES, CLOYES, ENGINETECH and 7 other brands. CLOYES B235 carries the "Popular" badge.

Economy: 3 parts, from CLOYES, ENGINETECH and ITM ENGINE COMPONENTS. A representative part number is CLOYES B235.

In the High Performance grade, GATES supplies 1 part: engineered beyond original-equipment specification. A representative part number is GATES T235RB.

The Standard Replacement section: 7 options from GATES, ACDELCO, CONTINENTAL and 4 other brands. GATES T235 is listed in this group.

This table covers the Timing Belt & component kits. Read more

11 Timing Belt & Component Kit parts for the 1996 Geo Prizm come from 8 brands — DAYCO, CONTINENTAL, GMB and 5 other brands. The "Popular" part is CLOYES BK235.

The Economy section: 1 option from CLOYES. CLOYES BK235 is listed in this group.

Standard Replacement: 10 parts, from DAYCO, CONTINENTAL, GMB and 4 other brands. A representative part number is AISIN TKT017.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

14 Timing Belt Tensioner parts for the 1996 Geo Prizm come from 14 brands — CLOYES, FAMOUS BRAND, GMB and 11 other brands. The "Popular" part is CLOYES 95342.

This table covers the Timing Cover Dust Seal sets. Read more

2 Timing Cover Dust Seal Set parts for the 1996 Geo Prizm come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO ES72747 and VICTOR REINZ 711576200.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5025.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 1996 Geo Prizm come from 2 brands — ITM ENGINE COMPONENTS and MAHLE / CLEVITE.

Listed part numbers: ITM ENGINE COMPONENTS 1501513 and MAHLE / CLEVITE B32908.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1996 Geo Prizm come from 5 brands — APEX, BECK/ARNLEY, FEL-PRO and 2 other brands. The "Popular" part is APEX AVC833S.

Listed part numbers: APEX AVC833S, BECK/ARNLEY 0361512 and FEL-PRO VS50440R, plus the other parts above.

This table covers the Valve Cover grommets. Read more

This group shows a single part: BECK/ARNLEY 0396613.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts for the 1996 Geo Prizm come from 4 brands — ENGINETECH, QUALCAST, SBI and 1 other brand.

Part numbers include ENGINETECH GD8147, QUALCAST 308147 and SBI 1408147, among others listed above.