How many engine parts fit the 2011 GMC Savana 2500?

Our catalog currently lists 754 engine parts for the 2011 GMC Savana 2500 across 123 subcategories and 68 brands, covering both the 4.8L V8 and the 6.0L V8. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2011 GMC Savana 2500 engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2011 GMC Savana 2500?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 GMC Savana 2500 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2011 GMC Savana 2500?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

2011 GMC Savana 2500 Engine Parts: OEM & Replacement (754 Parts)

Q: What oil viscosity is listed for the 2011 GMC Savana 2500?

Oil rows on this page include SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

Barometric Pressure Sensor

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12711681	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Barometric pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor.

Camshaft

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	22309	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22309 Stage 3 LSHigh PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Popular Fits: 4.8L V8	22206	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING 22206 Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22310	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22310 Stage 3 LSHigh PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 4.8L V8	22207	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING 22207 Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22323	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22323 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22324	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22324 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22325	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22325 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22326	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22326 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22327	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22327 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22328	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22328 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22422	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22422 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22423	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22423 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22424	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22424 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22425	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22425 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22501	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING 22501 Stage 5 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	22502	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING 22502 Stage 5 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22425D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22309B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22309B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22310B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22310B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Hydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 4.8L V8	CK22207D	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceChromoly Retainers And Dual Springs Fitment notes — MELLING CK22207D Stage 2 LSl High PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22325D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22326D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22328D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22422D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22423D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423D Stage 4 LSHigh PerformanceChromoly Retainers And Dual Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22424D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22501D	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501D Stage 5 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22502D	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502D Stage 5 LSHigh PerformanceChromoly Retainers And Dual Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22206B	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceChromoly Retainers And Beehive Springs Fitment notes — MELLING CK22206B Stage 2 LSl High PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22207B	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceChromoly Retainers And Beehive Springs Fitment notes — MELLING CK22207B Stage 2 LSl High PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22323B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22323B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22324B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22324B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22325B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22326B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22327B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22328B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22422B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22423B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22424B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22425B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22206DT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22206DT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Dual Spring111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22501B	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501B Stage 5 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22502B	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502B Stage 5 LSHigh PerformanceChromoly Retainers And Beehive Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22309BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22309BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22310BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22310BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Hydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 4.8L V8	CK22207BT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22207BT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22323BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22323BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22325BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22326BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22327BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22328BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22422BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22423BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22424BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22425BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22206BT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22206BT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22324BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22324BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22207DT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22207DT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Dual Spring112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22325DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22326DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22327DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22328DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22422DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22423DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22424DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22425DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22501DT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501DT Stage 5 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22502DT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502DT Stage 5 LSHigh PerformanceTitanium Retainers And Dual Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22501BT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501BT Stage 5 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22502BT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502BT Stage 5 LSHigh PerformanceTitanium Retainers And Beehive Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 4.8L V8	CK22327D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	ES5437	🇺🇸 US	Engine VIN code A,C,FUse roller followers	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	12689035	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Popular Fits: 4.8L V8	MC1390	🇺🇸 US 🇨🇦 CA	Single Bolt Camshaft	View on Amazon
SKP Popular Fits: 4.8L V8	SKES5437	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the camshafts that open the valves.

Camshaft Bearing

Brand	Part Number	Markets	Notes	Buy
DURA-BOND Popular Fits: 4.8L V8	CH25	🇺🇸 US 🇨🇦 CA		View on Amazon
ENGINETECH Popular Fits: 4.8L V8	CC433W	🇺🇸 US	Full Set Fitment notes — ENGINETECH CC433W Full Set 0.765 Wide Bearings	View on Amazon
SEALED POWER Popular Fits: 4.8L V8	1923M	🇺🇸 US 🇨🇦 CA	0.775 IN WidePosition # 1 or Position # 5	View on Amazon
CLOYES Fits: 4.8L V8	9232	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9232 High Performance CenterReplacement Camshaft Sprocket Thrust Bearing	View on Amazon
DURA-BOND Fits: 4.8L V8	CHP25	🇺🇸 US 🇨🇦 CA		View on Amazon
DURA-BOND Fits: 4.8L V8	CHP25T	🇺🇸 US 🇨🇦 CA	Coated	View on Amazon
ENGINE PRO Fits: 4.8L V8	152125	🇺🇸 US 🇨🇦 CA	(.775" Wide No. 1-5 Position)	View on Amazon
ENGINETECH Fits: 4.8L V8	CC433W1	🇺🇸 US 🇨🇦 CA	.001 undersized ID For tighter Oil clearance	View on Amazon
ENGINETECH Fits: 4.8L V8	CC438W	🇺🇸 US	Full Set Fitment notes — ENGINETECH CC438W Full Set .010 undersized ID For reground camshaft journals	View on Amazon
GM GENUINE Fits: 4.8L V8	19260877	🇺🇸 US 🇨🇦 CA	with Iron BlockThickness Diameter .0898-.0894 Fitment notes — GM GENUINE 19260877 with Iron BlockThickness Diameter .0898-.0894Position # 1 and # 5	View on Amazon
GM GENUINE Fits: 4.8L V8	19260878	🇺🇸 US 🇨🇦 CA	Thickness Diameter .082-.0798Position 2 and 4 Fitment notes — GM GENUINE 19260878 Thickness Diameter .082-.0798Position 2 and 4Position # 2 and # 4	View on Amazon
GM GENUINE Fits: 4.8L V8	19260879	🇺🇸 US 🇨🇦 CA	with Iron BlockTHK DIA .0703-.0699 Fitment notes — GM GENUINE 19260879 with Iron BlockTHK DIA .0703-.0699Position 3	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CS5171BB	🇺🇸 US 🇨🇦 CA	Bi-Metal (Babbitt) Fitment notes — KING ENGINE BEARINGS CS5171BB Bi-Metal (Babbitt) .775 IN Wide	View on Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Camshaft Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	857390	🇺🇸 US 🇨🇦 CA	Retainer Bolt	View on Amazon

This table covers the Camshaft bolts.

Camshaft Dowel Pin

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	24575061	🇺🇸 US 🇨🇦 CA	Outside Diameter (In): 0.185 In Fitment notes — GM GENUINE 24575061 Outside Diameter (In): 0.185 In 17MM LONG	View on Amazon

This table covers the Camshaft Dowel pins.

Camshaft Gear Installation Tool

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	CSITLS	🇺🇸 US 🇨🇦 CA	No Warranty Fitment notes — MELLING CSITLS No Warranty Designed To AID In The Installation of Both Camshaft Sprockets and VVT PhasersCan be Used On Both Single and Three Bolt Camshafts	View on Amazon

This table covers the Camshaft Gear Installation tools. This is a service tool, not a wear part — match the application in the notes.

Camshaft Hardware Kit

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	HK119	🇺🇸 US		View on Amazon

This table covers the Camshaft hardware kits.

Camshaft Retainer / Thrust Plate

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	ES73115	🇺🇸 US 🇨🇦 CA	Camshaft retainer plate & mounting bolts includedComplete Set Fitment notes — FEL-PRO ES73115 Camshaft retainer plate & mounting bolts includedComplete Set Will Service Both Recessed Bolt Holes & Flat-Type Bolt Holes	View on Amazon
MELLING Popular Fits: 4.8L V8	MF127	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 4.8L V8	AES319	🇺🇸 US 🇨🇦 CA	Retainer Bolt	View on Amazon
APEX Fits: 4.8L V8	AES318	🇺🇸 US 🇨🇦 CA	with Mounting Bolts	View on Amazon
ELRING Fits: 4.8L V8	857150	🇺🇸 US 🇨🇦 CA	without Bolts/Screws Fitment notes — ELRING 857150 without Bolts/Screws Frontal sidedExtended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	857320	🇺🇸 US 🇨🇦 CA	with Bolts/Screws Fitment notes — ELRING 857320 with Bolts/Screws Frontal sidedExtended Cargo VanBody code: G234	View on Amazon
ENGINETECH Fits: 4.8L V8	CR9016	🇺🇸 US 🇨🇦 CA	Retainer plate with recessed bolt holes	View on Amazon
GM GENUINE Fits: 4.8L V8	12589016	🇺🇸 US 🇨🇦 CA	Includes Seal Fitment notes — GM GENUINE 12589016 Includes Seal Use with Bolt 11561455	View on Amazon

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Camshaft Seal

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Fits: 4.8L V8	B32270	🇺🇸 US 🇨🇦 CA	Steel with Molded RubberCamshaft Cover Gasket Fitment notes — MAHLE / CLEVITE B32270 Steel with Molded RubberCamshaft Cover Gasket Recessed Bolt Holes In Camshaft Retainer Plate	View on Amazon
VICTOR REINZ Fits: 4.8L V8	711836900	🇺🇸 US 🇨🇦 CA	with Recessed Bolts	View on Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Camshaft Thrust Button

Brand	Part Number	Markets	Notes	Buy
INA Fits: 4.8L V8	ZM9232	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Camshaft Thrust buttons.

Connecting Rod

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	ECR324	🇺🇸 US	Reconditioned Fitment notes — ENGINETECH ECR324 Reconditioned Floating pinsStandard Bearing Outer Diameter	View on Amazon
GM GENUINE Fits: 4.8L V8	12607478	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the connecting rods between each piston and the crankshaft.

Connecting Rod Bearing

High Performance

Brand	Part Number	Markets	Notes	Buy
ENGINE PRO Fits: 4.8L V8	11663H	🇺🇸 US 🇨🇦 CA	Performance H SeriesSet Fitment notes — ENGINE PRO 11663H Performance H SeriesSetPair	View on Amazon
ENGINE PRO Fits: 4.8L V8	11663HX	🇺🇸 US 🇨🇦 CA	High PerformanceExtra Oil Clearance of .001 Fitment notes — ENGINE PRO 11663HX High PerformanceExtra Oil Clearance of .001Pair (Size: Standard)	View on Amazon
ENGINE PRO Fits: 4.8L V8	11663HD	🇺🇸 US 🇨🇦 CA	High Performancewith dowel hole Fitment notes — ENGINE PRO 11663HD High Performancewith dowel holePair	View on Amazon
ENGINE PRO Fits: 4.8L V8	11663HC	🇺🇸 US 🇨🇦 CA	High PerformanceCoated Fitment notes — ENGINE PRO 11663HC High PerformanceCoatedPerformance H Series CoatedSetPairNitro Black Coated Performance	View on Amazon
ENGINE PRO Fits: 4.8L V8	11663HXC	🇺🇸 US 🇨🇦 CA	High PerformanceCoated Fitment notes — ENGINE PRO 11663HXC High PerformanceCoatedExtra Oil Clearance of .001Performance H Series +.001 Bearing Oversize CoatedSetPairNitro Black Coated Performance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807HPNX	🇺🇸 US 🇨🇦 CA	BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPNX BI-Metal [Alecular]Setwith Extra Oil Clearance	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807HPN	🇺🇸 US 🇨🇦 CA	BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPN BI-Metal [Alecular]SetNarrow	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807HPND	🇺🇸 US 🇨🇦 CA	BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPND BI-Metal [Alecular]SetNarrowwith dowel hole	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807HPNDX	🇺🇸 US 🇨🇦 CA	BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPNDX BI-Metal [Alecular]Setwith Extra Oil ClearanceNarrowwith dowel hole	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807XPN	🇺🇸 US 🇨🇦 CA	SetNarrow Fitment notes — KING ENGINE BEARINGS CR807XPN SetNarrowPmaxblack	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807XPNX	🇺🇸 US 🇨🇦 CA	SetPmaxblack Fitment notes — KING ENGINE BEARINGS CR807XPNX SetPmaxblackwith Extra Oil Clearance	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807XPND	🇺🇸 US 🇨🇦 CA	SetNarrow Fitment notes — KING ENGINE BEARINGS CR807XPND SetNarrowPmaxblackwith dowel hole	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807XPNDX	🇺🇸 US 🇨🇦 CA	SetPmaxblack Fitment notes — KING ENGINE BEARINGS CR807XPNDX SetPmaxblackwith Extra Oil ClearanceNarrowwith dowel hole (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663HN	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HN High PerformanceH Series (Tri-Metal)NarrowedPairMax. Length: 0.7920 N	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663HND	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HND High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting RodPairMax. Length: 0.7920	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663FN	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FN High PerformancePairNarrowed F Series (Tri-Metal)N	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663VN	🇺🇸 US 🇨🇦 CA	High PerformanceNarrowed Fitment notes — MAHLE / CLEVITE CB663VN High PerformanceNarrowedV Series (TRI-Metal/Lead-Indium Overlay)Pair N	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663VXN	🇺🇸 US 🇨🇦 CA	High Performance.001in Extra Oil Clearance / Narrowed Fitment notes — MAHLE / CLEVITE CB663VXN High Performance.001in Extra Oil Clearance / NarrowedV Series (TRI-Metal/Lead-Indium Overlay)Pair XN (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663FND	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FND High PerformancePairNarrowed / Doweled Connecting Rod F Series (Tri-Metal)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663FXN	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FXN High PerformancePair.001in Extra Oil Clearance / Narrowed F Series (Tri-Metal)XN	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663FXND	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FXND High PerformancePair.001in Extra Oil Clearance / Narrowed / Doweled Connecting Rod F Series (Tri-Metal)XND	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663HXN	🇺🇸 US 🇨🇦 CA	High Performance.001in Extra Oil Clearance / Narrowed Fitment notes — MAHLE / CLEVITE CB663HXN High Performance.001in Extra Oil Clearance / NarrowedH Series (Tri-Metal)PairMax. Length: 0.7920 XN (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663HXND	🇺🇸 US 🇨🇦 CA	High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting Rod Fitment notes — MAHLE / CLEVITE CB663HXND High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting RodH Series (Tri-Metal)PairMax. Length: 0.7920 XND (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663HNC	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HNC High PerformanceH Series (Tri-Metal)Narrowed / CoatedPair NC	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663HXNC	🇺🇸 US 🇨🇦 CA	High Performance.001in Extra Oil Clearance / Narrowed / Coated Fitment notes — MAHLE / CLEVITE CB663HXNC High Performance.001in Extra Oil Clearance / Narrowed / CoatedH Series (Tri-Metal)Pair XNC (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB663HNDC	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HNDC High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting Rod / CoatedPair	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	BB253J	🇺🇸 US	Set Fitment notes — ENGINETECH BB253J Set Standard OD	View on Amazon
KING ENGINE BEARINGS Popular Fits: 4.8L V8	CR807SI	🇺🇸 US 🇨🇦 CA	SetBI-Metal (aluminum silicon base)	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	CB663A	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Pair Fitment notes — MAHLE / CLEVITE CB663A A Series (Aluminum)PairVertical Oil Clearance (maximum): 0.0028	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	CB663P	🇺🇸 US 🇨🇦 CA	P Series (Tri-Metal)Pair Fitment notes — MAHLE / CLEVITE CB663P P Series (Tri-Metal)Pair Chevrolet Engine	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	CB663A8	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE CB663A8 A Series (Aluminum)SetVertical Oil Clearance (maximum): 0.0028	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	CB663P8	🇺🇸 US 🇨🇦 CA	P Series (Tri-Metal)Set Fitment notes — MAHLE / CLEVITE CB663P8 P Series (Tri-Metal)SetVertical Oil Clearance (minimum): 0.0007	View on Amazon
ENGINETECH Fits: 4.8L V8	BB353J	🇺🇸 US	Set Fitment notes — ENGINETECH BB353J Set 0.002 Oversized OD	View on Amazon
GM GENUINE Fits: 4.8L V8	89017573	🇺🇸 US 🇨🇦 CA	Standard	View on Amazon
ITM ENGINE COMPONENTS Fits: 4.8L V8	8B6956	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR865SI	🇺🇸 US 🇨🇦 CA	Housing Bore +.002 INSet Fitment notes — KING ENGINE BEARINGS CR865SI Housing Bore +.002 INSetBI-Metal (aluminum silicon base)	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	CR807SIX	🇺🇸 US 🇨🇦 CA	BI-Metal (aluminum silicon base)Set Fitment notes — KING ENGINE BEARINGS CR807SIX BI-Metal (aluminum silicon base)Setwith Extra Oil Clearance	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB1776A	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Pair Fitment notes — MAHLE / CLEVITE CB1776A A Series (Aluminum)Pair Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CB1776A8	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE CB1776A8 A Series (Aluminum)Set Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock	View on Amazon
SEALED POWER Fits: 4.8L V8	2555CP	🇺🇸 US 🇨🇦 CA	Overplated Copper-Lead Alloy Fitment notes — SEALED POWER 2555CP Overplated Copper-Lead Alloy 1.5800 IN Wall Thickness	View on Amazon
SEALED POWER Fits: 4.8L V8	2555A	🇺🇸 US 🇨🇦 CA	A-Series Aluminum BearingsStandard Shaft Minimum (Inch): 2.0990 In	View on Amazon
SEALED POWER Fits: 4.8L V8	82555A	🇺🇸 US 🇨🇦 CA	SetA-Series aluminum bearings	View on Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	11570662	🇺🇸 US 🇨🇦 CA	SINGLE USEM9X44,13	View on Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	C293CSA	🇺🇸 US	Does Not Include Cam Retainer Plate	View on Amazon
FEL-PRO Popular Fits: 4.8L V8	CS9284	🇺🇸 US 🇨🇦 CA	Lower Oil Pan Gasket Not IncludedPermadry Molded Rubber Oil Pan Gasket(s) Included	View on Amazon
ULTRA-POWER Popular Fits: 4.8L V8	CS9284	🇺🇸 US 🇨🇦 CA	SetLower Oil Pan Gasket Not Included Fitment notes — ULTRA-POWER CS9284 SetLower Oil Pan Gasket Not IncludedMolded Rubber Oil Pan Gasket(s) Included	View on Amazon
AJUSA Fits: 4.8L V8	54329700	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 4.8L V8	ACS3071	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 4.8L V8	ACS3072	🇺🇸 US 🇨🇦 CA	with Camshaft retainer plate	View on Amazon
ELRING Fits: 4.8L V8	816400	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Oil Drain Plug Fitment notes — ELRING 816400 with Crankshaft Seal, Oil Drain Plug Extended Cargo VanBody code: G234	View on Amazon
FEL-PRO Fits: 4.8L V8	CS92841	🇺🇸 US 🇨🇦 CA	Permadry Rubber Oil Pan Gasket(s) Included Fitment notes — FEL-PRO CS92841 Permadry Rubber Oil Pan Gasket(s) Included Camshaft sensor, Flow valve connector, Vacuum pump gaskets included	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	CS5975A	🇺🇸 US 🇨🇦 CA	Recessed Bolt Holes In Camshaft Retainer Plate	View on Amazon
SKP Fits: 4.8L V8	SKCS9284	🇺🇸 US 🇨🇦 CA	Molded Rubber Oil Pan Gasket(s) Included	View on Amazon
VICTOR REINZ Fits: 4.8L V8	081012601	🇺🇸 US 🇨🇦 CA	Does Not Include Camshaft Retainer Plate	View on Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	104250	🇺🇸 US	RemanufacturedIncludes Connecting Rod Bearings & Crankshaft Main Bearings Fitment notes — ENGINETECH 104250 RemanufacturedIncludes Connecting Rod Bearings & Crankshaft Main BearingsReman Rod and Main Bearings IncludedCasting # 12553482, 482with 58 tooth reluctor Wheel	View on Amazon

This table covers the crankshafts that turn piston motion into rotation.

Crankshaft Main Bearing

High Performance

Brand	Part Number	Markets	Notes	Buy
KING ENGINE BEARINGS Popular Fits: 4.8L V8	MB5013XP	🇺🇸 US 🇨🇦 CA	SetPmaxblack	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	MS2199H	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE MS2199H High PerformanceH Series (Tri-Metal)Set	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	MB5013HP	🇺🇸 US 🇨🇦 CA	Setalecular	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	MB5013XPX	🇺🇸 US 🇨🇦 CA	SetPmaxblack Fitment notes — KING ENGINE BEARINGS MB5013XPX SetPmaxblackwith Extra Oil Clearance	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	MB5777XPX	🇺🇸 US 🇨🇦 CA	SetPmaxblack Fitment notes — KING ENGINE BEARINGS MB5777XPX SetPmaxblackwith Extra Oil Clearance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	MB5013HPX	🇺🇸 US 🇨🇦 CA	Setalecular Fitment notes — KING ENGINE BEARINGS MB5013HPX Setalecularwith Extra Oil Clearance (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	MS2199HXC	🇺🇸 US 🇨🇦 CA	High Performance.001in Extra Oil Clearance / Coated Fitment notes — MAHLE / CLEVITE MS2199HXC High Performance.001in Extra Oil Clearance / CoatedH Series (Tri-Metal)Set (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	MS2199HC	🇺🇸 US 🇨🇦 CA	High PerformanceCoated Fitment notes — MAHLE / CLEVITE MS2199HC High PerformanceCoatedH Series (Tri-Metal)Set	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	MS2199HX	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE MS2199HX High PerformanceH Series (Tri-Metal)Set .001 IN Extra Oil Clearance (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	MB3592HX	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE MB3592HX High PerformanceH Series (Tri-Metal) X-.001 IN Extra Oil Clearance (Size: Standard)	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	BC409J	🇺🇸 US	Set	View on Amazon
KING ENGINE BEARINGS Popular Fits: 4.8L V8	MB5293SI	🇺🇸 US 🇨🇦 CA	BI-Metal (aluminum silicon base)Set	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	MS2199A	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Set	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	MS2199P	🇺🇸 US 🇨🇦 CA	P Series (Tri-Metal)Set	View on Amazon
ENGINE PRO Fits: 4.8L V8	122199H	🇺🇸 US 🇨🇦 CA	Performance H SeriesSet	View on Amazon
ENGINE PRO Fits: 4.8L V8	122199HX	🇺🇸 US 🇨🇦 CA	Performance H Series +.001 Bearing OversizeSet Fitment notes — ENGINE PRO 122199HX Performance H Series +.001 Bearing OversizeSet (Size: Standard)	View on Amazon
ENGINE PRO Fits: 4.8L V8	122199HC	🇺🇸 US 🇨🇦 CA	Performance H Series CoatedSet Fitment notes — ENGINE PRO 122199HC Performance H Series CoatedSetNitro Black Coated Performance	View on Amazon
ENGINE PRO Fits: 4.8L V8	122199HXC	🇺🇸 US 🇨🇦 CA	Performance H Series +.001 Bearing Oversize CoatedSet Fitment notes — ENGINE PRO 122199HXC Performance H Series +.001 Bearing Oversize CoatedSetNitro Black Coated Performance (Size: Standard)	View on Amazon
GM GENUINE Fits: 4.8L V8	89017572	🇺🇸 US 🇨🇦 CA	Standard# 3 Fitment notes — GM GENUINE 89017572 Standard# 3Thrust Bearing	View on Amazon
GM GENUINE Fits: 4.8L V8	89017571	🇺🇸 US 🇨🇦 CA	# 1,2,4,5Standard	View on Amazon
ITM ENGINE COMPONENTS Fits: 4.8L V8	5M6956	🇺🇸 US 🇨🇦 CA	Set Fitment notes — ITM ENGINE COMPONENTS 5M6956 Set LS2	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	MB5293MC	🇺🇸 US 🇨🇦 CA	BI-Metal (aluminum silicon base)Set Fitment notes — KING ENGINE BEARINGS MB5293MC BI-Metal (aluminum silicon base)SetCoated	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	MB5766SI	🇺🇸 US 🇨🇦 CA	Housing Bore +.010 INSet Fitment notes — KING ENGINE BEARINGS MB5766SI Housing Bore +.010 INSetBI-Metal (aluminum silicon base)	View on Amazon
KING ENGINE BEARINGS Fits: 4.8L V8	MB5398SI	🇺🇸 US 🇨🇦 CA	Housing Bore +.020 INSet Fitment notes — KING ENGINE BEARINGS MB5398SI Housing Bore +.020 INSetBI-Metal (aluminum silicon base)	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	MS2366A	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE MS2366A A Series (Aluminum)Set .020 IN Oversize Housing Bore (Size: 0.010" Undersize)	View on Amazon
SEALED POWER Fits: 4.8L V8	7298MA	🇺🇸 US 🇨🇦 CA	SetA-Series aluminum bearings	View on Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing Cap Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12556127	🇺🇸 US 🇨🇦 CA	M8X1.25X24	View on Amazon
GM GENUINE Fits: 4.8L V8	12560272	🇺🇸 US 🇨🇦 CA	M10X2X102.5	View on Amazon

This table covers the Crankshaft Main Bearing Cap bolts.

Crankshaft Main Bearing Gasket

Brand	Part Number	Markets	Notes	Buy
SKP Fits: 4.8L V8	SKBS40640	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon

This table covers the gaskets that seal the Crankshaft Main Bearing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Crankshaft Main Bearing Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
VICTOR REINZ Fits: 4.8L V8	711348000	🇺🇸 US 🇨🇦 CA	CrankshaftCrankshaft Machining Required	View on Amazon

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface.

Crankshaft Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
NATIONAL Popular Fits: 4.8L V8	99210	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
WJB / INMOTION PARTS Popular Fits: 4.8L V8	WS99210	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
FEL-PRO Fits: 4.8L V8	16229	🇺🇸 US 🇨🇦 CA	RearWide Lip Fitment notes — FEL-PRO 16229 RearWide Lip1.156 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool	View on Amazon
FEL-PRO Fits: 4.8L V8	16228	🇺🇸 US 🇨🇦 CA	RearNarrow Lip Fitment notes — FEL-PRO 16228 RearNarrow Lip0.780 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool	View on Amazon
TIMKEN Fits: 4.8L V8	KWK99210	🇺🇸 US 🇨🇦 CA	Kwik-Sleeve Fitment notes — TIMKEN KWK99210 Kwik-Sleeve Front	View on Amazon
VICTOR REINZ Fits: 4.8L V8	711457300	🇺🇸 US 🇨🇦 CA	RearWide Lip Fitment notes — VICTOR REINZ 711457300 RearWide Lip1.156 IN LengthCrankshaft Machining Required	View on Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Repair Sleeve Tool

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Fits: 4.8L V8	16329	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.

Crankshaft Seal

Brand	Part Number	Markets	Notes	Buy
APEX Popular Fits: 4.8L V8	ABS371	🇺🇸 US 🇨🇦 CA	Rearwith Housing Gasket	View on Amazon
APEX Popular Fits: 4.8L V8	ABS372	🇺🇸 US 🇨🇦 CA	Rearwith Rear Main Seal Cover, Housing Gasket & Bolts	View on Amazon
FEL-PRO Popular Fits: 4.8L V8	BS40640	🇺🇸 US 🇨🇦 CA	PTFE RubberIncludes Sleeve Fitment notes — FEL-PRO BS40640 PTFE RubberIncludes Sleeve Rear1 Piece	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	89060436	🇺🇸 US 🇨🇦 CA	RearReverse Lip Seal	View on Amazon
TIMKEN Popular Fits: 4.8L V8	100470	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
AJUSA Fits: 4.8L V8	15113900	🇺🇸 US 🇨🇦 CA	FrontClockwise	View on Amazon
APEX Fits: 4.8L V8	ATC3711	🇺🇸 US 🇨🇦 CA	Seal Only Fitment notes — APEX ATC3711 Seal Only Front	View on Amazon
APEX Fits: 4.8L V8	ABS377	🇺🇸 US 🇨🇦 CA	Seal Only Fitment notes — APEX ABS377 Seal Only Rear	View on Amazon
AUTOTECNICA Fits: 4.8L V8	GM1419631	🇺🇸 US 🇨🇦 CA	Includes Seal, Gasket & Hardware	View on Amazon
BCA Fits: 4.8L V8	NS100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
ELRING Fits: 4.8L V8	877130	🇺🇸 US 🇨🇦 CA	Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Left-hand Twist Fitment notes — ELRING 877130 Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Left-hand Twist Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	868600	🇺🇸 US 🇨🇦 CA	Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand Twist Fitment notes — ELRING 868600 Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand Twist Extended Cargo VanBody code: G234	View on Amazon
ENGINETECH Fits: 4.8L V8	S5671	🇺🇸 US	PTFE	View on Amazon
ENGINETECH Fits: 4.8L V8	SK5671	🇺🇸 US	PTFE Fitment notes — ENGINETECH SK5671 PTFE Includes Housing Gasket	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	JV1657	🇺🇸 US 🇨🇦 CA	Includes Carrier GasketPTFE (Polytetrafluoroethylene) Fitment notes — MAHLE / CLEVITE JV1657 Includes Carrier GasketPTFE (Polytetrafluoroethylene)Rear	View on Amazon
NATIONAL Fits: 4.8L V8	100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
NATIONAL Fits: 4.8L V8	100470	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
SKF Fits: 4.8L V8	38617	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
SKP Fits: 4.8L V8	SK100470	🇺🇸 US 🇨🇦 CA	Frontfluoroelastomer	View on Amazon
SKP Fits: 4.8L V8	SK100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
TIMKEN Fits: 4.8L V8	100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
ULTRA-POWER Fits: 4.8L V8	BS40640	🇺🇸 US 🇨🇦 CA	Set Fitment notes — ULTRA-POWER BS40640 Set RearProtective Sleeve Included To Prevent Seal Lip Damage During InstallationPtfe Rubber Seal1 Piece	View on Amazon
VICTOR REINZ Fits: 4.8L V8	191008001	🇺🇸 US 🇨🇦 CA	PTFESet Fitment notes — VICTOR REINZ 191008001 PTFESet Rear1 Piece	View on Amazon
WJB / INMOTION PARTS Fits: 4.8L V8	WS100085	🇺🇸 US 🇨🇦 CA	Inside Diameter: 3.8580000000000001 In Fitment notes — WJB / INMOTION PARTS WS100085 Inside Diameter: 3.8580000000000001 In Rear	View on Amazon
WJB / INMOTION PARTS Fits: 4.8L V8	WS100470	🇺🇸 US 🇨🇦 CA	Front	View on Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Cover

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	635518	🇺🇸 US 🇨🇦 CA	Improved DesignMust Use Dorman 635-000 Installation Tool or Equivalent	View on Amazon
GM GENUINE Fits: 4.8L V8	12639250	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
SKP Fits: 4.8L V8	SK635518	🇺🇸 US 🇨🇦 CA	Includes Bolts, Gasket, Housing, and Seal	View on Amazon

This table covers the Crankshaft Seal covers.

Crankshaft Seal Cover Tool

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	635000	🇺🇸 US 🇨🇦 CA	IMPROVED DESIGN	View on Amazon

This table covers the Crankshaft Seal Cover tools. This is a service tool, not a wear part — match the application in the notes.

Crankshaft Seal Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	948270	🇺🇸 US 🇨🇦 CA	Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	782350	🇺🇸 US 🇨🇦 CA	Gasket Design: Metal Elastomer Gasket Fitment notes — ELRING 782350 Gasket Design: Metal Elastomer Gasket UpperExtended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	104560	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Bolts/Screws Fitment notes — ELRING 104560 with Crankshaft Seal, Bolts/Screws Transmission SidedExtended Cargo VanBody code: G234	View on Amazon
GM GENUINE Fits: 4.8L V8	12639249	🇺🇸 US 🇨🇦 CA	Color: Black, Coated Aluminum Fitment notes — GM GENUINE 12639249 Color: Black, Coated Aluminum Rear	View on Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	CH1060R	🇺🇸 US	RemanufacturedIncludes Valves and springs Fitment notes — ENGINETECH CH1060R RemanufacturedIncludes Valves and springs Casting # 243,799Sold Individually	View on Amazon
GM GENUINE Fits: 4.8L V8	12746921	🇺🇸 US 🇨🇦 CA	INCLUDES VALVESdoes not include Engine COOL Air Bleed PLUG (12602048)	View on Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Alignment Dowel Pin

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12570326	🇺🇸 US 🇨🇦 CA		View on Amazon
PIONEER Fits: 4.8L V8	S1115	🇺🇸 US 🇨🇦 CA	Base Model	View on Amazon
PIONEER Fits: 4.8L V8	PG525	🇺🇸 US 🇨🇦 CA	Base Model	View on Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand	Part Number	Markets	Notes	Buy
APEX Popular Fits: 4.8L V8	AHB390	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
FEL-PRO Popular Fits: 4.8L V8	ES72390	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
ENGINETECH Fits: 4.8L V8	HB288	🇺🇸 US	Set	View on Amazon
ENGINETECH Fits: 4.8L V8	HBK288	🇺🇸 US	Set Fitment notes — ENGINETECH HBK288 Set Full Engine Set	View on Amazon
GM GENUINE Fits: 4.8L V8	19258707	🇺🇸 US 🇨🇦 CA	M11X2X100	View on Amazon
GM GENUINE Fits: 4.8L V8	12558840	🇺🇸 US 🇨🇦 CA	SINGLE USEM8X1.25X45	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	GS33449	🇺🇸 US 🇨🇦 CA	Cylinder Head Bolt KitSet Fitment notes — MAHLE / CLEVITE GS33449 Cylinder Head Bolt KitSetSteel	View on Amazon
VICTOR REINZ Fits: 4.8L V8	141009901	🇺🇸 US 🇨🇦 CA	Set	View on Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	26190PT	🇺🇸 US 🇨🇦 CA	Permatorquemls Laserweld Technology	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	54442	🇺🇸 US 🇨🇦 CA	Consolidated MLS DesignMulti-Layered Steel	View on Amazon
SKP Popular Fits: 4.8L V8	SK54442	🇺🇸 US 🇨🇦 CA	Multi-Layered Steel Fitment notes — SKP SK54442 Multi-Layered Steel Consolidated MLS Design	View on Amazon
AJUSA Fits: 4.8L V8	10241700	🇺🇸 US 🇨🇦 CA	Multi Layered Steel Fitment notes — AJUSA 10241700 Multi Layered Steel 100 Bore Diameter	View on Amazon
APEX Fits: 4.8L V8	AHG389	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 4.8L V8	261721	🇺🇸 US 🇨🇦 CA	Diameter [MM]: 100Material: Multi-Layer Steel (MLS) Fitment notes — ELRING 261721 Diameter [MM]: 100Material: Multi-Layer Steel (MLS) Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	058420	🇺🇸 US 🇨🇦 CA	Diameter [MM]: 100,08Material: Metalofl Fitment notes — ELRING 058420 Diameter [MM]: 100,08Material: Metalofl Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	466520	🇺🇸 US 🇨🇦 CA	Diameter [MM]: 100,3Material: Multi-Layer Steel (MLS) Fitment notes — ELRING 466520 Diameter [MM]: 100,3Material: Multi-Layer Steel (MLS) Extended Cargo VanBody code: G234	View on Amazon
ENGINETECH Fits: 4.8L V8	HC293B	🇺🇸 US	Multi-Layer Steel Fitment notes — ENGINETECH HC293B Multi-Layer Steel Engine VIN code A,C,F	View on Amazon
ENGINETECH Fits: 4.8L V8	PHC293B	🇺🇸 US	Fire Seal Premium Head MLS Gasket Fitment notes — ENGINETECH PHC293B Fire Seal Premium Head MLS Gasket 7 Layer	View on Amazon
GM GENUINE Fits: 4.8L V8	12589226	🇺🇸 US 🇨🇦 CA	HEAD BOLT REPLACEMENT REQUIRED	View on Amazon
VICTOR REINZ Fits: 4.8L V8	611064800	🇺🇸 US 🇨🇦 CA	Thick: 0.053 In	View on Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	C293HSE	🇺🇸 US	with MLS head gaskets Fitment notes — ENGINETECH C293HSE with MLS head gaskets with upgraded metal intake gaskets	View on Amazon
FEL-PRO Popular Fits: 4.8L V8	HS26190PT4	🇺🇸 US 🇨🇦 CA	Perma Dry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Valve Stem Seals	View on Amazon
APEX Fits: 4.8L V8	AHS3137	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 4.8L V8	042760	🇺🇸 US 🇨🇦 CA	Includes Valve Stem Seals Fitment notes — ELRING 042760 Includes Valve Stem Seals Extended Cargo VanBody code: G234	View on Amazon
FEL-PRO Fits: 4.8L V8	HS26190APT4VK	🇺🇸 US 🇨🇦 CA	Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets, Valve Stem Seals Fitment notes — FEL-PRO HS26190APT4VK Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets, Valve Stem Seals Head bolt replacement recommended	View on Amazon
ITM ENGINE COMPONENTS Fits: 4.8L V8	0914604	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	HS54442C	🇺🇸 US 🇨🇦 CA	Includes Valve Stem Seals	View on Amazon
ULTRA-POWER Fits: 4.8L V8	HS26190PT4	🇺🇸 US 🇨🇦 CA	Head Bolts Not IncludedHead Bolt Replacement Recommended Fitment notes — ULTRA-POWER HS26190PT4 Head Bolts Not IncludedHead Bolt Replacement RecommendedIncludes Valve Stem Seals, Molded Rubber Valve Cover Gasket(s), Intake Manifold Gaskets, Premium Valve Stem Seals	View on Amazon
VICTOR REINZ Fits: 4.8L V8	021009401	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Plug

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	11562126	🇺🇸 US 🇨🇦 CA	Press In CupCup, 32.03X7.88X1.27, S30400 Stainless Steel Per SAE J405	View on Amazon
GM GENUINE Fits: 4.8L V8	11610259	🇺🇸 US 🇨🇦 CA	M12X1.5X21.2Hex, Socket	View on Amazon

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Cylinder Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	ESL173	🇺🇸 US		View on Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Block Heater

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12586687	🇺🇸 US 🇨🇦 CA	Engine Block Heater (K05)	View on Amazon
GM GENUINE Fits: 4.8L V8	19130016	🇺🇸 US 🇨🇦 CA	Coolant Heater Fitment notes — GM GENUINE 19130016 Coolant Heater Mating Connector Use 88986262Auxiliary Heater (K08)	View on Amazon
KAT'S HEATERS Fits: 4.8L V8	11484	🇺🇸 US 🇨🇦 CA	Freeze Plug Heater Fitment notes — KAT'S HEATERS 11484 Freeze Plug Heater Threaded Electrical Plug End28mm400 WattsEasiest Mounting Location: Rear Left or: Front LeftThreadedOEM Thermostatically Controlled Heat	View on Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Kit Gasket Set

Brand	Part Number	Markets	Notes	Buy
AJUSA Fits: 4.8L V8	50568600	🇺🇸 US 🇨🇦 CA		View on Amazon
FEL-PRO Fits: 4.8L V8	2603197	🇺🇸 US 🇨🇦 CA	Includes Permadry Molded Rubber Oil Pan Gasket(s), Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets	View on Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	V4371	🇺🇸 US	Gasoline & FLEX Fuel.3130 Stem Fitment notes — ENGINETECH V4371 Gasoline & FLEX Fuel.3130 Stem1.551" Head23-8N stainless	View on Amazon
MELLING Popular Fits: 4.8L V8	V1935	🇺🇸 US 🇨🇦 CA	OE Replacement	View on Amazon
ENGINETECH Fits: 4.8L V8	V4371S	🇺🇸 US	Stellite Fitment notes — ENGINETECH V4371S Stellite LPG.3127 stem1.551 Head23-8N stainless	View on Amazon
GM GENUINE Fits: 4.8L V8	12694167	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	2114172	🇺🇸 US 🇨🇦 CA	1.551 IN Head Diameter0.3134 IN Stem Diameter Fitment notes — MAHLE / CLEVITE 2114172 1.551 IN Head Diameter0.3134 IN Stem Diameter105.50mm Length1 Lock Groove Valve	View on Amazon
MELLING Fits: 4.8L V8	V1935S	🇺🇸 US 🇨🇦 CA	STELLITE	View on Amazon
QUALCAST Fits: 4.8L V8	101935	🇺🇸 US 🇨🇦 CA	1.550 Head Diameter.	View on Amazon
QUALCAST Fits: 4.8L V8	101935S	🇺🇸 US 🇨🇦 CA	1.550 Head Diameter Stellite Seat Face LPG	View on Amazon
SBI Fits: 4.8L V8	01935	🇺🇸 US 🇨🇦 CA	Base Model	View on Amazon
SBI Fits: 4.8L V8	01935S	🇺🇸 US 🇨🇦 CA	Stellite Face Fitment notes — SBI 01935S Stellite Face Base ModelLPG	View on Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Expansion Plug

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	MPE900BR	🇺🇸 US 🇨🇦 CA	BrassOil Galley Plug Not Included Fitment notes — MELLING MPE900BR BrassOil Galley Plug Not Included Cylinder Block Kit	View on Amazon
MELLING Popular Fits: 4.8L V8	MPE900BRGP	🇺🇸 US 🇨🇦 CA	Includes Oil Galley PlugBrass Fitment notes — MELLING MPE900BRGP Includes Oil Galley PlugBrass Cylinder Block Kit	View on Amazon
ENGINETECH Fits: 4.8L V8	PK827	🇺🇸 US	Steel Fitment notes — ENGINETECH PK827 Steel Cylinder Head Plug Kit	View on Amazon
MELLING Fits: 4.8L V8	MPE901BR	🇺🇸 US 🇨🇦 CA	BrassCylinder Head Plug Kit	View on Amazon
PIONEER Fits: 4.8L V8	PE496	🇺🇸 US 🇨🇦 CA	Steel Fitment notes — PIONEER PE496 Steel Base Model	View on Amazon
PIONEER Fits: 4.8L V8	PE496B	🇺🇸 US 🇨🇦 CA	Brass Fitment notes — PIONEER PE496B Brass Base Model	View on Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Harmonic Balancer

Economy

Brand	Part Number	Markets	Notes	Buy
SKP Fits: 4.8L V8	SK594209	🇺🇸 US 🇨🇦 CA	Double Serpentine, Groove Quantity 6 and 4Depth 4-3/8" Fitment notes — SKP SK594209 Double Serpentine, Groove Quantity 6 and 4Depth 4-3/8"Outer Diameter: 7-9/16"Inner Diameter: 1-1/2"	View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
DAYCO Fits: 4.8L V8	PBU1190SS25	🇺🇸 US 🇨🇦 CA	Race Performance 25% Underdrive	View on Amazon
DAYCO Fits: 4.8L V8	PBO81190SC10	🇺🇸 US 🇨🇦 CA	SC Performance 8 Rib 10% Overdrive	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: 4.8L V8	594209	🇺🇸 US 🇨🇦 CA	Double SerpentineDiameter Fitment notes — DORMAN 594209 Double SerpentineDiameter7.72"Width: 4.75"Weight (lbs.): 10.4lbs	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	19300488	🇺🇸 US 🇨🇦 CA		View on Amazon
ATP Fits: 4.8L V8	102171	🇺🇸 US 🇨🇦 CA	Double Serpentine	View on Amazon
DAYCO Fits: 4.8L V8	PB1190N	🇺🇸 US 🇨🇦 CA	Premium	View on Amazon
PIONEER Fits: 4.8L V8	DA3510	🇺🇸 US 🇨🇦 CA	Groove Quantity 6 or 4Double Serpentine Fitment notes — PIONEER DA3510 Groove Quantity 6 or 4Double SerpentineOuter Diameter: 7.732 In	View on Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Bolt

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	917139	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	12557840	🇺🇸 US 🇨🇦 CA	M16X2.0X103	View on Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12638038	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.

Intake Manifold Bolt

Brand	Part Number	Markets	Notes	Buy
ARP Fits: 4.8L V8	1302001	🇺🇸 US 🇨🇦 CA	Hex Bolt Head Fitment notes — ARP 1302001 Hex Bolt Head Engine Designation: LS1, LS4, LS6, LM7, LQ4, RL4	View on Amazon
ARP Fits: 4.8L V8	1302101	🇺🇸 US 🇨🇦 CA	Black Oxide12 Point Bolt Head Fitment notes — ARP 1302101 Black Oxide12 Point Bolt Head Engine Designation: LS1, LS4, LS6, LM7, LQ4, RL4	View on Amazon
ARP Fits: 4.8L V8	4302101	🇺🇸 US 🇨🇦 CA	Stainless Steel12 Point Bolt Head Fitment notes — ARP 4302101 Stainless Steel12 Point Bolt Head Engine Designation: LS1, LS4, LS6, LM7, LQ4, RL4	View on Amazon
GM GENUINE Fits: 4.8L V8	12575384	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Intake Manifold bolts.

Intake Manifold Gasket

Premium

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	MS98016T	🇺🇸 US 🇨🇦 CA	SetIncludes Perma DryPlus Intake Manifold Gaskets Fitment notes — FEL-PRO MS98016T SetIncludes Perma DryPlus Intake Manifold Gaskets Lower	View on Amazon
VICTOR REINZ Fits: 4.8L V8	111056401	🇺🇸 US 🇨🇦 CA	Maxdry STL®Improved Design Fitment notes — VICTOR REINZ 111056401 Maxdry STL®Improved DesignSet Lower	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	IC293A	🇺🇸 US		View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	MS16340	🇺🇸 US 🇨🇦 CA	Contains Premium Grade Intake Manifold GasketsMolded Rubber	View on Amazon
ULTRA-POWER Popular Fits: 4.8L V8	MS96587	🇺🇸 US 🇨🇦 CA	SetIncludes OEM design intake manifold gaskets Fitment notes — ULTRA-POWER MS96587 SetIncludes OEM design intake manifold gaskets Lower	View on Amazon
AJUSA Fits: 4.8L V8	13288600	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 4.8L V8	AMS3901	🇺🇸 US 🇨🇦 CA	Set Fitment notes — APEX AMS3901 Set Lifter Valley Cover Set Type	View on Amazon
APEX Fits: 4.8L V8	AMS3850	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
APEX Fits: 4.8L V8	AMS3851P	🇺🇸 US 🇨🇦 CA	Set Fitment notes — APEX AMS3851P Set IMPROVED DESIGN	View on Amazon
FEL-PRO Fits: 4.8L V8	MS96169	🇺🇸 US 🇨🇦 CA	Includes SealValley Gasket Fitment notes — FEL-PRO MS96169 Includes SealValley GasketSet	View on Amazon
FEL-PRO Fits: 4.8L V8	MS96587	🇺🇸 US 🇨🇦 CA	Set Fitment notes — FEL-PRO MS96587 Set Lower	View on Amazon
GM GENUINE Fits: 4.8L V8	12610141	🇺🇸 US 🇨🇦 CA	Valley Pan	View on Amazon
GM GENUINE Fits: 4.8L V8	89060413	🇺🇸 US 🇨🇦 CA	Set Fitment notes — GM GENUINE 89060413 Set does not include EGR Valve Pipe Gasket	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	MS19305	🇺🇸 US 🇨🇦 CA	SetMolded Rubber Fitment notes — MAHLE / CLEVITE MS19305 SetMolded Rubber Lifter Valley Gasket Type	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	MS20135	🇺🇸 US 🇨🇦 CA	SetMolded Rubber / Steel	View on Amazon
SKP Fits: 4.8L V8	SK615211	🇺🇸 US 🇨🇦 CA		View on Amazon
ULTRA-POWER Fits: 4.8L V8	MS98016T	🇺🇸 US 🇨🇦 CA	SetIncludes Intake Manifold Gaskets Fitment notes — ULTRA-POWER MS98016T SetIncludes Intake Manifold Gaskets Lower	View on Amazon
VICTOR REINZ Fits: 4.8L V8	111028901	🇺🇸 US 🇨🇦 CA	Set Fitment notes — VICTOR REINZ 111028901 Set Valley Pan	View on Amazon
VICTOR REINZ Fits: 4.8L V8	111063101	🇺🇸 US 🇨🇦 CA	Set Fitment notes — VICTOR REINZ 111063101 Set Lower	View on Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Plenum Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	878650	🇺🇸 US 🇨🇦 CA	Extended Cargo VanBody code: G234	View on Amazon

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12627971	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 4.8L V8	V3244	🇺🇸 US 🇨🇦 CA		View on Amazon
QUALCAST Fits: 4.8L V8	1013244	🇺🇸 US 🇨🇦 CA	2.000 Head Dia. 0.3135 Stem. 4.870 OAL. SG. Nitrided	View on Amazon
SBI Fits: 4.8L V8	13244	🇺🇸 US 🇨🇦 CA	Base Model	View on Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Economy

Brand	Part Number	Markets	Notes	Buy
SKP Fits: 4.8L V8	SKM3178	🇺🇸 US 🇨🇦 CA	Fits Front Right Fitment notes — SKP SKM3178 Fits: Front Right or: Front Left	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ANCHOR Popular Fits: 4.8L V8	3178	🇺🇸 US 🇨🇦 CA	Fits Front Right Fitment notes — ANCHOR 3178 Fits: Front Right or: Front Left	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	25863822	🇺🇸 US 🇨🇦 CA		View on Amazon
DEA / MARMON RIDE CONTROL Fits: 4.8L V8	A5109	🇺🇸 US 🇨🇦 CA	Fits Front Right Fitment notes — DEA / MARMON RIDE CONTROL A5109 Fits: Front Right or: Front Left	View on Amazon
PIONEER Fits: 4.8L V8	605109	🇺🇸 US 🇨🇦 CA	Fits Front Right Fitment notes — PIONEER 605109 Fits: Front Right or: Front Left	View on Amazon
WESTAR Fits: 4.8L V8	EM5354	🇺🇸 US 🇨🇦 CA	Front	View on Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	11588273	🇺🇸 US 🇨🇦 CA	To Frame10mm x 1.5 x 40mm	View on Amazon

This table covers the Motor Mount bolts.

Motor Mount Bracket

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	20886359	🇺🇸 US 🇨🇦 CA	Left	View on Amazon

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Motor Mount Kit

Brand	Part Number	Markets	Notes	Buy
ANCHOR Fits: 4.8L V8	300034	🇺🇸 US 🇨🇦 CA		View on Amazon
WESTAR Fits: 4.8L V8	ETK079	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Motor Mount kits.

Oil

Summary: Notes list SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.

Full Synthetic

Brand	Part Number	Markets	Notes	Buy
ACDELCO Popular Fits: 4.8L V8	109324	🇺🇸 US	5W-30(DEXOS1 GEN 3)(Full Synthetic) X 61 Quart	View on Amazon
LIQUI MOLY Popular Fits: 4.8L V8	20228	🇺🇸 US 🇨🇦 CA	Molygen New Generation 5W-305 Liter	View on Amazon
MOBIL Popular Fits: 4.8L V8	125195	🇺🇸 US 🇨🇦 CA	Full Synthetic 5W-30Mobil Full Synthetic Fitment notes — MOBIL 125195 Full Synthetic 5W-30Mobil Full SyntheticSAE 5W-301 Quart	View on Amazon
MOBIL Popular Fits: 4.8L V8	124315	🇺🇸 US 🇨🇦 CA	5W-30Mobil 1 Advanced Fitment notes — MOBIL 124315 5W-30Mobil 1 AdvancedFull SyntheticSAE 5W-301 Quart	View on Amazon
VALVOLINE Popular Fits: 4.8L V8	VV955	🇺🇸 US 🇨🇦 CA	Advanced Protection Full Synthetic SAE 5W-301 Quart	View on Amazon
LIQUI MOLY Fits: 4.8L V8	20136	🇺🇸 US 🇨🇦 CA	Special Tec AA 5W-301 Liter	View on Amazon
LIQUI MOLY Fits: 4.8L V8	20226	🇺🇸 US 🇨🇦 CA	Molygen New Generation 5W-301 Liter	View on Amazon
LIQUI MOLY Fits: 4.8L V8	20138	🇺🇸 US 🇨🇦 CA	Special Tec AA 5W-305 Liter	View on Amazon
LUCAS OIL Fits: 4.8L V8	10049	🇺🇸 US 🇨🇦 CA	FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt	View on Amazon
LUCAS OIL Fits: 4.8L V8	18005	🇺🇸 US 🇨🇦 CA	Full Synthetic Motor Oil SAE 5W-306 Gallon	View on Amazon
LUCAS OIL Fits: 4.8L V8	18008	🇺🇸 US 🇨🇦 CA	Full Synthetic Motor Oil SAE 0W-306 Gallon	View on Amazon
MOBIL Fits: 4.8L V8	112627	🇺🇸 US 🇨🇦 CA	Extended Performance 5W-30Mobil 1 Extended Performance Fitment notes — MOBIL 112627 Extended Performance 5W-30Mobil 1 Extended PerformanceFull SyntheticSAE 5W-301 Quart	View on Amazon
MOBIL Fits: 4.8L V8	124595	🇺🇸 US 🇨🇦 CA	Truck & SUV 5W-30Mobil 1 Truck & SUV Fitment notes — MOBIL 124595 Truck & SUV 5W-30Mobil 1 Truck & SUVFull SyntheticSAE 5W-301 Quart	View on Amazon
PENTOSIN Fits: 4.8L V8	8044214	🇺🇸 US 🇨🇦 CA	5W-30-Pentospeed-DEXOS1 GEN31 Liter Fitment notes — PENTOSIN 8044214 5W-30-Pentospeed-DEXOS1 GEN31 Liter For Temperature Above -20 F	View on Amazon
PENTOSIN Fits: 4.8L V8	8044216	🇺🇸 US 🇨🇦 CA	5W-30-Pentospeed-DEXOS1 GEN35 Liters Fitment notes — PENTOSIN 8044216 5W-30-Pentospeed-DEXOS1 GEN35 Liters For Temperature Above -20 F	View on Amazon
VALVOLINE Fits: 4.8L V8	891678	🇺🇸 US 🇨🇦 CA	Extended Protection Full Synthetic SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: 4.8L V8	904564	🇺🇸 US 🇨🇦 CA	Restore & Protect Full Synthetic SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: 4.8L V8	891670	🇺🇸 US 🇨🇦 CA	Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart	View on Amazon
VALVOLINE Fits: 4.8L V8	904566	🇺🇸 US 🇨🇦 CA	Restore & Protect Full Synthetic SAE 5W-305 Quart	View on Amazon
VALVOLINE Fits: 4.8L V8	881164	🇺🇸 US 🇨🇦 CA	Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart	View on Amazon

High Mileage (>75,000 Miles)

Brand	Part Number	Markets	Notes	Buy
MOBIL Fits: 4.8L V8	103767	🇺🇸 US 🇨🇦 CA	High Mileage 5W-30Mobil 1 High Mileage Fitment notes — MOBIL 103767 High Mileage 5W-30Mobil 1 High MileageFull SyntheticSAE 5W-301 Quart	View on Amazon
MOBIL Fits: 4.8L V8	123842	🇺🇸 US 🇨🇦 CA	Extended Performance High Mileage 5W-30Synthetic Fitment notes — MOBIL 123842 Extended Performance High Mileage 5W-30Synthetic1 Quart	View on Amazon
VALVOLINE Fits: 4.8L V8	VV179	🇺🇸 US 🇨🇦 CA	Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: 4.8L V8	881169	🇺🇸 US 🇨🇦 CA	Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart	View on Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	72435	🇺🇸 US 🇨🇦 CA	with Oval Port	View on Amazon
FEL-PRO Popular Fits: 4.8L V8	72462	🇺🇸 US 🇨🇦 CA	Center Tubewith Dual Round Port	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	15203889	🇺🇸 US 🇨🇦 CA	Configuration: ONE Piece Fitment notes — GM GENUINE 15203889 Configuration: ONE Piece Engine Oil Cooling System (KC4)	View on Amazon
APEX Fits: 4.8L V8	AOM6016	🇺🇸 US 🇨🇦 CA	Oval Port	View on Amazon
APEX Fits: 4.8L V8	AOM6015	🇺🇸 US 🇨🇦 CA	Dual round port	View on Amazon
DORMAN Fits: 4.8L V8	66219	🇺🇸 US 🇨🇦 CA	Seals Two Pipes	View on Amazon
DORMAN Fits: 4.8L V8	66218	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 4.8L V8	853210	🇺🇸 US 🇨🇦 CA	Material: Metaloseal Fitment notes — ELRING 853210 Material: Metaloseal Extended Cargo VanBody code: G234	View on Amazon
GM GENUINE Fits: 4.8L V8	12611384	🇺🇸 US 🇨🇦 CA	Use with 11588714 BoltExc. Engine Oil Cooling System (KC4) Fitment notes — GM GENUINE 12611384 Use with 11588714 BoltExc. Engine Oil Cooling System (KC4)Oil Pan Cover Gasket	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	B31867	🇺🇸 US 🇨🇦 CA	Beaded Steel Fitment notes — MAHLE / CLEVITE B31867 Beaded Steel Oval Port	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	B31872	🇺🇸 US 🇨🇦 CA	Engine Oil Cooler GasketMetal with Molded Rubber Fitment notes — MAHLE / CLEVITE B31872 Engine Oil Cooler GasketMetal with Molded Rubber Dual round port	View on Amazon
VICTOR REINZ Fits: 4.8L V8	711350900	🇺🇸 US 🇨🇦 CA	Replaces OE Part Number(s) 12593252, 12611384with Oval Ports	View on Amazon
VICTOR REINZ Fits: 4.8L V8	711351000	🇺🇸 US 🇨🇦 CA	CenterReplaces OE Part Number(s) 12561710 Fitment notes — VICTOR REINZ 711351000 CenterReplaces OE Part Number(s) 12561710with Dual Round Ports	View on Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Cooler Line

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	625522	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	20832452	🇺🇸 US 🇨🇦 CA	Engine Oil Cooling System (KC4)	View on Amazon
SUNSONG Fits: 4.8L V8	5801389	🇺🇸 US 🇨🇦 CA	Inlet and Outlet Assembly	View on Amazon
ULTRA-POWER Fits: 4.8L V8	625522	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Oil Cooler Line Connector

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	800607	🇺🇸 US 🇨🇦 CA	Transmission/Oil Line Connector Fitment notes — DORMAN 800607 Transmission/Oil Line Connector 20 mm	View on Amazon
GM GENUINE Fits: 4.8L V8	19303965	🇺🇸 US 🇨🇦 CA	Includes O-RingSteel Fitment notes — GM GENUINE 19303965 Includes O-RingSteel without Bypass20mm	View on Amazon
GM GENUINE Fits: 4.8L V8	23378668	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the harness connectors at the Oil Cooler Line. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Oil Cooler Seal

Brand	Part Number	Markets	Notes	Buy
ULTRA-POWER Fits: 4.8L V8	72435	🇺🇸 US 🇨🇦 CA	Oval Port	View on Amazon
ULTRA-POWER Fits: 4.8L V8	72462	🇺🇸 US 🇨🇦 CA	with Dual Round PortCenter Tube	View on Amazon

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Dipstick / Tube

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	12609269	🇺🇸 US 🇨🇦 CA	Tube OnlyIncludes seal Fitment notes — GM GENUINE 12609269 Tube OnlyIncludes seal Lower Tube	View on Amazon
DORMAN Fits: 4.8L V8	917433	🇺🇸 US 🇨🇦 CA	Tube Only	View on Amazon
GM GENUINE Fits: 4.8L V8	12609756	🇺🇸 US 🇨🇦 CA	Tube Only Fitment notes — GM GENUINE 12609756 Tube Only Upper	View on Amazon
GM GENUINE Fits: 4.8L V8	12580069	🇺🇸 US 🇨🇦 CA	Dipstick Only Fitment notes — GM GENUINE 12580069 Dipstick Only 1288.76MM	View on Amazon
SKP Fits: 4.8L V8	SK917433	🇺🇸 US 🇨🇦 CA	Tube Only	View on Amazon

This table covers the Oil Dipstick tubes.

Oil Dipstick / Tube Seal

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	584210	🇺🇸 US 🇨🇦 CA	Inner Diameter [MM]: 6,07 Fitment notes — ELRING 584210 Inner Diameter [MM]: 6,07 Extended Cargo VanBody code: G234	View on Amazon
FEL-PRO Fits: 4.8L V8	73889	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	24504031	🇺🇸 US 🇨🇦 CA	6.07 ID1.78 Diameter	View on Amazon

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Drain Plug

Economy

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: 4.8L V8	090175	🇺🇸 US 🇨🇦 CA	Integrated GasketM12 x 1.75 Thread	View on Amazon

Twist Drain

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	092018	🇺🇸 US 🇨🇦 CA	Thread Size: M12-1.75Twist Style	View on Amazon

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: 4.8L V8	090034	🇺🇸 US 🇨🇦 CA	M12 x 1.75 Thread Fitment notes — DORMAN 090034 M12 x 1.75 Thread Gasket Included	View on Amazon
AGS Fits: 4.8L V8	ODP00009	🇺🇸 US 🇨🇦 CA	M12x1.75	View on Amazon
ELRING Fits: 4.8L V8	823400	🇺🇸 US 🇨🇦 CA	with Seal RingBolt Head-/Nut Design: Male Hex Fitment notes — ELRING 823400 with Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,75x17 Extended Cargo VanBody code: G234	View on Amazon
GM GENUINE Fits: 4.8L V8	11562588	🇺🇸 US 🇨🇦 CA	with SealExc. Magnet Fitment notes — GM GENUINE 11562588 with SealExc. Magnetwith Hex HeadM12X1.75X25	View on Amazon
VAICO Fits: 4.8L V8	V400755	🇺🇸 US 🇨🇦 CA	Thread Size: M 12 X 1,75Includes Gasket	View on Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	70820	🇺🇸 US 🇨🇦 CA	Rubber Fitment notes — FEL-PRO 70820 Rubber Dished Washer0.410 (in) Inside Diameter x 0.820 (in) Outside Diameter	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	12616850	🇺🇸 US 🇨🇦 CA	Diameter 19.39	View on Amazon
AJUSA Fits: 4.8L V8	01288800	🇺🇸 US 🇨🇦 CA		View on Amazon
DORMAN Fits: 4.8L V8	097119	🇺🇸 US 🇨🇦 CA	Rubber Gasket Fitment notes — DORMAN 097119 Rubber Gasket M12 Drain Plug	View on Amazon
DORMAN Fits: 4.8L V8	97119	🇺🇸 US 🇨🇦 CA	Rubber GasketRubber Fitment notes — DORMAN 97119 Rubber GasketRubberSizeM12, 7/16"Inside Dia: 0.448"/11.38mmOutside Dia.: 0.811"/20.60mmThickness: 0.102"/2.59mm M12 Drain Plug	View on Amazon
ELRING Fits: 4.8L V8	056130	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 Fitment notes — ELRING 056130 Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8Shape: O-Ring Extended Cargo VanBody code: G234	View on Amazon
FEL-PRO Fits: 4.8L V8	71244	🇺🇸 US 🇨🇦 CA	Rubber Fitment notes — FEL-PRO 71244 Rubber Dished Washer0.415 (in) Inside Diameter x 0.740 (in) Outside Diameter	View on Amazon
ULTRA-POWER Fits: 4.8L V8	097119	🇺🇸 US 🇨🇦 CA	ID: 0.448"RUBBER GASKET	View on Amazon
VAICO Fits: 4.8L V8	V401110	🇺🇸 US 🇨🇦 CA		View on Amazon
VICTOR REINZ Fits: 4.8L V8	711351300	🇺🇸 US 🇨🇦 CA	0.4150 IN Inside Diameter	View on Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand	Part Number	Markets	Notes	Buy
MOTORAD Popular Fits: 4.8L V8	MO99	🇺🇸 US 🇨🇦 CA		View on Amazon
ACDELCO Fits: 4.8L V8	FC208	🇺🇸 US 🇨🇦 CA	GM Original Equipment Fitment notes — ACDELCO FC208 GM Original Equipment 5W30	View on Amazon
CALORSTAT Fits: 4.8L V8	OC2314	🇺🇸 US 🇨🇦 CA	PlasticTwist-On	View on Amazon
GATES Fits: 4.8L V8	31103	🇺🇸 US 🇨🇦 CA		View on Amazon
SKP Fits: 4.8L V8	SKMO99	🇺🇸 US 🇨🇦 CA	with Plastic cap	View on Amazon

This table covers the caps on the oil filler neck.

Oil Filler Cap Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	592250	🇺🇸 US 🇨🇦 CA	SealMaterial: AEM (Ethylene Acrylate Rubber) Fitment notes — ELRING 592250 SealMaterial: AEM (Ethylene Acrylate Rubber) Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	823620	🇺🇸 US 🇨🇦 CA	SealMaterial: HNBR (hydrogenated nitrile butadiene rubber) Fitment notes — ELRING 823620 SealMaterial: HNBR (hydrogenated nitrile butadiene rubber) Extended Cargo VanBody code: G234	View on Amazon
FEL-PRO Fits: 4.8L V8	73193	🇺🇸 US 🇨🇦 CA	Services OEM bonded Cap sealAftermarket Design Fitment notes — FEL-PRO 73193 Services OEM bonded Cap sealAftermarket Design28 (mm) Inside DiameterSeal	View on Amazon
GM GENUINE Fits: 4.8L V8	24100002	🇺🇸 US 🇨🇦 CA	Size # 32027.94MM Inner Diameter	View on Amazon

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Tube

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12577224	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Filler tubes.

Oil Filler Tube Grommet

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12610201	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Filler Tube grommets.

Oil Filter

Economy

Brand	Part Number	Markets	Notes	Buy
FRAM Fits: 4.8L V8	FE10060	🇺🇸 US 🇨🇦 CA	Spin-OnTough Guard or Synthetic Endurance	View on Amazon
FVP Fits: 4.8L V8	R7060	🇺🇸 US 🇨🇦 CA		View on Amazon
PRO-TEC Fits: 4.8L V8	PXL57060	🇺🇸 US 🇨🇦 CA		View on Amazon
PUROLATOR Fits: 4.8L V8	PL12222	🇺🇸 US 🇨🇦 CA	Bypass Relief Valve Setting: 12-15 PSIMedia Material: Enhanced Cellulose Fitment notes — PUROLATOR PL12222 Bypass Relief Valve Setting: 12-15 PSIMedia Material: Enhanced Cellulose Synthetic Oil Application. Premium filter recommended	View on Amazon
VAICO Fits: 4.8L V8	V400978	🇺🇸 US 🇨🇦 CA	DURAGUARD (without TOP MOUNTED FILTER BYPASS VALVE)	View on Amazon
VARIOUS MFR Fits: 4.8L V8	PG2222	🇺🇸 US 🇨🇦 CA		View on Amazon

High Performance / Heavy Duty

Brand	Part Number	Markets	Notes	Buy
WIX Popular Fits: 4.8L V8	57060XP	🇺🇸 US 🇨🇦 CA	XP Extreme DutyBest for Synthetic Motor Oils Fitment notes — WIX 57060XP XP Extreme DutyBest for Synthetic Motor Oils Factory filled synthetic oil	View on Amazon
MOBIL Fits: 4.8L V8	M1113A	🇺🇸 US 🇨🇦 CA	Extended Performance	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ACDELCO Popular Fits: 4.8L V8	PF48	🇺🇸 US 🇨🇦 CA	GM Original EquipmentFilter Media Material: Enhanced Cellulose Fitment notes — ACDELCO PF48 GM Original EquipmentFilter Media Material: Enhanced Cellulose without Top Mounted Filter Bypass Valve, New E-Core Construction	View on Amazon
BOSCH Popular Fits: 4.8L V8	3334	🇺🇸 US 🇨🇦 CA	Premium Oil FilterConnection Size: M22X1.5	View on Amazon
WIX Popular Fits: 4.8L V8	57060	🇺🇸 US 🇨🇦 CA	Spin-On Lube Filter Fitment notes — WIX 57060 Spin-On Lube Filter Factory filled synthetic oil	View on Amazon
ACDELCO Fits: 4.8L V8	PF48B	🇺🇸 US 🇨🇦 CA	SilverWhite Shell	View on Amazon
DENSO Fits: 4.8L V8	1502020	🇺🇸 US 🇨🇦 CA	Engine Oil Filter or FTF Engine Oil Filter	View on Amazon
HASTINGS / BALDWIN Fits: 4.8L V8	LF613	🇺🇸 US 🇨🇦 CA		View on Amazon
HENGST Fits: 4.8L V8	H98W	🇺🇸 US 🇨🇦 CA	Spin-On Fitment notes — HENGST H98W Spin-On without Top Mounted Filter Bypass Valve	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	OC614	🇺🇸 US 🇨🇦 CA	Spin-On Fitment notes — MAHLE / CLEVITE OC614 Spin-On Bypass pressure 14 PSI	View on Amazon
MANN Fits: 4.8L V8	W7030	🇺🇸 US 🇨🇦 CA	Anti-Drain Back Valve: No Fitment notes — MANN W7030 Anti-Drain Back Valve: No Synthetic Oil Application. Premium filter recommended	View on Amazon
VARIOUS MFR Fits: 4.8L V8	PG2222EX	🇺🇸 US 🇨🇦 CA	Extended Life	View on Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12600225	🇺🇸 US 🇨🇦 CA	Threaded FittingM20XM22	View on Amazon

This table covers the Oil Filter adapters.

Oil Filter Adapter Gasket / O-Ring

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Fits: 4.8L V8	73548	🇺🇸 US 🇨🇦 CA	Upper	View on Amazon
FEL-PRO Fits: 4.8L V8	73555	🇺🇸 US 🇨🇦 CA	Lower	View on Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Filter Bypass Valve

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	927841	🇺🇸 US 🇨🇦 CA		View on Amazon
DORMAN Fits: 4.8L V8	926600	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	19542299	🇺🇸 US 🇨🇦 CA	Engine Oil Cooling System (KC4)	View on Amazon

This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil Filter Gasket

Brand	Part Number	Markets	Notes	Buy
APEX Fits: 4.8L V8	AOM6015	🇺🇸 US 🇨🇦 CA		View on Amazon
ULTRA-POWER Fits: 4.8L V8	72462	🇺🇸 US 🇨🇦 CA	Oil Filter Gasket or SealGasket Fitment notes — ULTRA-POWER 72462 Oil Filter Gasket or SealGasketCenter Tubewith Dual Round Port	View on Amazon

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter Housing Seal

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12610160	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Galley Plug

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	OGV1	🇺🇸 US	GEN 3	View on Amazon
GM GENUINE Fits: 4.8L V8	12573460	🇺🇸 US 🇨🇦 CA	Includes O-Ring Fitment notes — GM GENUINE 12573460 Includes O-Ring Engine BlockSeal15.68mm Diameter	View on Amazon
MELLING Fits: 4.8L V8	MOGP100	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 4.8L V8	MOGP100HP	🇺🇸 US 🇨🇦 CA	High PerformanceDouble O-Ring Design Fitment notes — MELLING MOGP100HP High PerformanceDouble O-Ring DesignBlack anodized billet 6061-T6 aluminum 2.54 inches Long	View on Amazon

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Pan

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	12640746	🇺🇸 US 🇨🇦 CA	Includes Baffle, Bolts, Plug, Deadener, Gasket, Valve, Fitting, Seal	View on Amazon
SKP Popular Fits: 4.8L V8	SK264375	🇺🇸 US 🇨🇦 CA	without Oil Level Switch	View on Amazon
DORMAN Fits: 4.8L V8	264375	🇺🇸 US 🇨🇦 CA		View on Amazon
SPECTRA PREMIUM Fits: 4.8L V8	GMP53C	🇺🇸 US 🇨🇦 CA	Gasket and/or Sealant Not Includedwithout Sensor Hole	View on Amazon
ULTRA-POWER Fits: 4.8L V8	264375	🇺🇸 US 🇨🇦 CA		View on Amazon
VAICO Fits: 4.8L V8	V570124	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	795390	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	12554990	🇺🇸 US 🇨🇦 CA	RRM6X1.0X136	View on Amazon
PIONEER Fits: 4.8L V8	S1350	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pan bolts.

Oil Pan Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12577903	🇺🇸 US 🇨🇦 CA	without KC4For Models with KC4 See Group 1.540 Engine Oil Cooler Lines	View on Amazon

This table covers the Oil Pan covers.

Oil Pan Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	OS30693R	🇺🇸 US 🇨🇦 CA	Permadry Molded Rubber	View on Amazon
ULTRA-POWER Popular Fits: 4.8L V8	OS30693R	🇺🇸 US 🇨🇦 CA	Molded Rubber Gasket(s) IncludedMolded Rubber	View on Amazon
APEX Fits: 4.8L V8	AOP371	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 4.8L V8	947800	🇺🇸 US 🇨🇦 CA	Material: Ethylene Acrylic Elastomer (AEM)Number of Bolt Holes: 15 Fitment notes — ELRING 947800 Material: Ethylene Acrylic Elastomer (AEM)Number of Bolt Holes: 15 Extended Cargo VanBody code: G234	View on Amazon
ENGINETECH Fits: 4.8L V8	OC293A	🇺🇸 US		View on Amazon
GM GENUINE Fits: 4.8L V8	12612350	🇺🇸 US 🇨🇦 CA	Bolt Hole Quantity: 17	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	OS32241	🇺🇸 US 🇨🇦 CA	Molded Rubber	View on Amazon
VICTOR REINZ Fits: 4.8L V8	101022301	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan Gasket Rivet

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12558759	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pan Gasket rivets.

Oil Pressure Relief Valve

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12608835	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 4.8L V8	MOPR100	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pressure Relief valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil Pressure Relief Valve Deflector

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12639759	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 4.8L V8	MOD100	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pressure Relief Valve deflectors.

Oil Pressure Relief Valve Plug

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	M29537	🇺🇸 US 🇨🇦 CA	Contains 5 Pieces Fitment notes — MELLING M29537 Contains 5 Pieces Fits: All GM LS Engine Oil Pumps	View on Amazon

This table covers the Oil Pressure Relief Valve plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Pressure Relief Valve Spring

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	29555	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 29555 High Performance Relief Pressure 55 Pounds, Use with CautionUse with 10294, 10295, 10296 Oil PumpsHigh Pressure Spring Equivalent To The Springand Shim Used In GM Oil Pump Number 19301144 For The Limited Edition Copo CamaroNote: Changing The Relief Spring Will Not Change Low Idle Oil Pressure	View on Amazon

This table covers the Oil Pressure Relief Valve springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Oil Pump

Economy

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	EPK152	🇺🇸 US	'Pressure King' Value Line Pump Fitment notes — ENGINETECH EPK152 'Pressure King' Value Line Pump Stock	View on Amazon
SKP Fits: 4.8L V8	SKOM295	🇺🇸 US 🇨🇦 CA		View on Amazon
SKP Fits: 4.8L V8	SK10295	🇺🇸 US 🇨🇦 CA		View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	10295	🇺🇸 US 🇨🇦 CA	High PerformanceIncludes Optional Standard and +25 PSI Pressure springs, O-Ring for Oil Pickup Tube Fitment notes — MELLING 10295 High PerformanceIncludes Optional Standard and +25 PSI Pressure springs, O-Ring for Oil Pickup TubeNo Warranty Stock Volume +10 PSI Higher Pressure Over Stock Pressure, High Performance Oil PumpExclusive Rotor DesignUses 7/8 Inch Stock Bolt-On Oil Pickup Tube	View on Amazon
MELLING Fits: 4.8L V8	10294	🇺🇸 US 🇨🇦 CA	High PerformanceIncludes Optional +10 PSI and +25 PSI High Pressure Springs Fitment notes — MELLING 10294 High PerformanceIncludes Optional +10 PSI and +25 PSI High Pressure Springs Use Only On Aftermarket Cylinder Blocks with Priority Main Oiling. Reduced Flow Output (-15%) Compared To Stock M295 Oil PumpStandard Pressure Spring Installed	View on Amazon
MELLING Fits: 4.8L V8	10296	🇺🇸 US 🇨🇦 CA	High PerformanceIncludes Optional Standard and +25 PSI Pressure springs, O-Ring for Oil Pickup Tube Fitment notes — MELLING 10296 High PerformanceIncludes Optional Standard and +25 PSI Pressure springs, O-Ring for Oil Pickup TubeNo Warranty 18% Higher Volume High Performance Oil Pump10 PSI Higher PressureExclusive Rotor DesignUses 7/8 Inch Stock Bolt-On Oil Pickup Tube	View on Amazon

High Volume / Pressure

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	M295HV	🇺🇸 US 🇨🇦 CA	18% Additional Volume Over Stock Oil PumpDoes Not Include Oil Pickup Tube Assembly	View on Amazon
ENGINETECH Fits: 4.8L V8	EP295HV	🇺🇸 US	High Volume	View on Amazon
MELLING Fits: 4.8L V8	M295HV395S	🇺🇸 US 🇨🇦 CA	High Volume Pump18% Additional Volume Over Stock Oil Pump Fitment notes — MELLING M295HV395S High Volume Pump18% Additional Volume Over Stock Oil PumpIncludes Oil Pickup Tube Assembly	View on Amazon
ULTRA-POWER Fits: 4.8L V8	UPOP295HV	🇺🇸 US 🇨🇦 CA	High Volume18% Additional Volume Over Stock Oil Pump Fitment notes — ULTRA-POWER UPOP295HV High Volume18% Additional Volume Over Stock Oil PumpDoes Not Include Oil Pickup Tube AssyRecommended For High Mileage Engines	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	12710303	🇺🇸 US 🇨🇦 CA	Oil Pump Pressure Type: Standard PressureSolenoid Included: No	View on Amazon
MELLING Popular Fits: 4.8L V8	M295	🇺🇸 US 🇨🇦 CA	Does Not Include Oil Pickup Tube Assembly	View on Amazon
ENGINETECH Fits: 4.8L V8	EP295	🇺🇸 US	Housing Material: Cast AluminumOil Pump Volume Type: Standard Volume Fitment notes — ENGINETECH EP295 Housing Material: Cast AluminumOil Pump Volume Type: Standard Volume Stock	View on Amazon
MELLING Fits: 4.8L V8	M295395S	🇺🇸 US 🇨🇦 CA	Includes Oil Pickup Tube AssemblyGears Included: Yes	View on Amazon
SEALED POWER Fits: 4.8L V8	22443645	🇺🇸 US 🇨🇦 CA	Does Not Include Oil Pickup Tube Assembly	View on Amazon
VAICO Fits: 4.8L V8	V510665	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Oil Pump Cover Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	795390	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pump Cover bolts.

Oil Pump Drive Gear

Brand	Part Number	Markets	Notes	Buy
CLOYES Fits: 4.8L V8	9228	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9228 High Performance Replacement Oil Pump Drive Nose / Gear	View on Amazon

This table covers the Oil Pump Drive gears.

Oil Pump Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	875400	🇺🇸 US 🇨🇦 CA	Material: FVMQ fluorosilicone rubber Fitment notes — ELRING 875400 Material: FVMQ fluorosilicone rubber Suction PipeExtended Cargo VanBody code: G234	View on Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Pickup Tube / Screen

Brand	Part Number	Markets	Buy
GM GENUINE Fits: 4.8L V8	12608579	🇺🇸 US 🇨🇦 CA	View on Amazon
MELLING Fits: 4.8L V8	395S	🇺🇸 US 🇨🇦 CA	View on Amazon
SEALED POWER Fits: 4.8L V8	22415095	🇺🇸 US 🇨🇦 CA	View on Amazon

This table covers the pickup tubes and screens that feed the oil pump.

Oil Pump Pickup Tube Bracket

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	M29500	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING M29500 High PerformanceNo Warranty Uses The Unused Bolt Hole In The Oil PumpDoes Not Fit Pickup Tube with Welded Flange GM Part Number 12608593Does Not Fit Pickup Tubes with Two Bolt Hole Flanges	View on Amazon

This table covers the brackets that mount the Oil Pump Pickup Tube. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Oil Pump Pickup Tube O-Ring

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	72401	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 4.8L V8	AOM6014	🇺🇸 US 🇨🇦 CA	Inlet Tube	View on Amazon
GM GENUINE Fits: 4.8L V8	12584922	🇺🇸 US 🇨🇦 CA	TEFLON COATEDORANGE Fitment notes — GM GENUINE 12584922 TEFLON COATEDORANGEID=19.63 T=4.32	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	B32790	🇺🇸 US 🇨🇦 CA	Oil Pump Pick-up Tube GasketMolded Rubber Fitment notes — MAHLE / CLEVITE B32790 Oil Pump Pick-up Tube GasketMolded Rubber O-Ring Type	View on Amazon
VICTOR REINZ Fits: 4.8L V8	411041600	🇺🇸 US 🇨🇦 CA	Inlet Tube	View on Amazon

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Strainer Gasket

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	M29517	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Sump Plate

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	99971	🇺🇸 US 🇨🇦 CA	Oil Level Sensor Cover	View on Amazon

This table covers the Oil Sump plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Oil Sump Windage Tray

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12611129	🇺🇸 US 🇨🇦 CA	Mount Hole Diameter (In): 0.452 IN	View on Amazon

This table covers the windage trays that keep crank windage out of the oil sump.

Piston

Premium

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	P5095	🇺🇸 US 🇨🇦 CA	Coated SkirtFlat Top Fitment notes — ENGINETECH P5095 Coated SkirtFlat TopFloating PinAnodized Head	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	2243958WR	🇺🇸 US 🇨🇦 CA	with RingsSkirt Coated Fitment notes — MAHLE / CLEVITE 2243958WR with RingsSkirt Coated Compression Reduced	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	2243887WR	🇺🇸 US 🇨🇦 CA	with RingsSkirt Coated	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	2243958	🇺🇸 US 🇨🇦 CA	Skirt Coated Fitment notes — MAHLE / CLEVITE 2243958 Skirt Coated Compression Reduced	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	2243887	🇺🇸 US 🇨🇦 CA	Skirt Coated	View on Amazon
SEALED POWER Fits: 4.8L V8	H1508CPA	🇺🇸 US 🇨🇦 CA	Flat Head with Two Valve Reliefs Duroshield Skirt Coated PistonRing Groove Widths: 1.5mm, 1.5mm, 3.0mm	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	19208675	🇺🇸 US 🇨🇦 CA	Standard	View on Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Pin Bushing

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	EB0238	🇺🇸 US	Semi-finished ID	View on Amazon

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Piston Pin Retainer

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12569638	🇺🇸 US 🇨🇦 CA	Used with Federal Mogul Pistons	View on Amazon

This table covers the Piston Pin retainers.

Piston Ring

Premium

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	C96008	🇺🇸 US	PremiumSet Fitment notes — ENGINETECH C96008 PremiumSetMoly Coated 1.5mm / 1.5mm / 3.0mm	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	41859CP	🇺🇸 US 🇨🇦 CA	PremiumMaterial Carbon Steel / Carbon Steel / Stainless Steel Fitment notes — MAHLE / CLEVITE 41859CP PremiumMaterial Carbon Steel / Carbon Steel / Stainless SteelSetAxial Height: 1.5MM / 1.5MM / 3.0MMFacing: Plasma-Moly / Chrome Shallow Groove	View on Amazon
HASTINGS MANUFACTURING Fits: 4.8L V8	2M4978S	🇺🇸 US 🇨🇦 CA	Plasma Moly Top Ring1 Cylinder Set Fitment notes — HASTINGS MANUFACTURING 2M4978S Plasma Moly Top Ring1 Cylinder SetFor 2 Ring Pistonwith Shallow Top Groove	View on Amazon
HASTINGS MANUFACTURING Fits: 4.8L V8	2M4978	🇺🇸 US 🇨🇦 CA	Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly Fitment notes — HASTINGS MANUFACTURING 2M4978 Plasma Moly Top RingTop Ring Surface Treatment: Plasma MolyFull Setfor 2 Ring Pistonwith Shallow Top Groove	View on Amazon
SEALED POWER Fits: 4.8L V8	E937K	🇺🇸 US 🇨🇦 CA	PremiumRing Groove Widths: 1.5mm, 1.5mm, 3.0mm Fitment notes — SEALED POWER E937K PremiumRing Groove Widths: 1.5mm, 1.5mm, 3.0mmSetMoly Steel Top RingDuctile Second Ring	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12670787	🇺🇸 US 🇨🇦 CA	Standard	View on Amazon
GM GENUINE Fits: 4.8L V8	12670788	🇺🇸 US 🇨🇦 CA	0.5MM O.S.	View on Amazon
ITM ENGINE COMPONENTS Fits: 4.8L V8	0216837	🇺🇸 US 🇨🇦 CA	Set1.5 X 1.5 X 3mm	View on Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	500704	🇺🇸 US 🇨🇦 CA	High PerformanceChrome Moly Steel Fitment notes — MELLING 500704 High PerformanceChrome Moly SteelNo Warranty	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	EPR614	🇺🇸 US 🇨🇦 CA	7.397" Overall Length Fitment notes — ENGINETECH EPR614 7.397" Overall Length Intake and Exhaust	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	10238852	🇺🇸 US 🇨🇦 CA	Material: 1010 Steel	View on Amazon
MELLING Fits: 4.8L V8	MPR614	🇺🇸 US 🇨🇦 CA		View on Amazon
QUALCAST Fits: 4.8L V8	746614	🇺🇸 US 🇨🇦 CA	7.397 Length	View on Amazon
SBI Fits: 4.8L V8	1901537	🇺🇸 US 🇨🇦 CA	Intake or ExhaustBase Model Fitment notes — SBI 1901537 Intake or ExhaustBase Model7.397 Length312X075 Diameter/Wall	View on Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Push Rod Guide Plate

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	MGP114HP	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING MGP114HP High Performance 5/16" ThickSold as Set of 8	View on Amazon

This table covers the Push Rod Guide plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Rocker Arm

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	ER359	🇺🇸 US 🇨🇦 CA	Fits Engine VIN Code 5,G,H,J,N,UIntake or Exhaust Fitment notes — ENGINETECH ER359 Fits: Engine VIN Code 5,G,H,J,N,UIntake or ExhaustInline Typewith hardened pivot and heavy duty lock ringsor with hardened pivot and heavy duty lock rings	View on Amazon
MELLING Popular Fits: 4.8L V8	MR1341	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	12681275	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 4.8L V8	MRK100HP	🇺🇸 US 🇨🇦 CA	KitHigh Performance Fitment notes — MELLING MRK100HP KitHigh Performance Use with trunion install Kit Mtik-100	View on Amazon
SBI Fits: 4.8L V8	1801337	🇺🇸 US 🇨🇦 CA	Intake or ExhaustBase Model Fitment notes — SBI 1801337 Intake or ExhaustBase ModelRoller Pivot Assy.Note: Captive Bearing Design with High Grade Steel Trunion	View on Amazon
SKP Fits: 4.8L V8	SKMR1341	🇺🇸 US 🇨🇦 CA	ExhaustCaptive Bearing Design Fitment notes — SKP SKMR1341 ExhaustCaptive Bearing DesignCentered	View on Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Rocker Arm Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12560961	🇺🇸 US 🇨🇦 CA	M8X1.25X52.5	View on Amazon

This table covers the Rocker Arm bolts.

Rocker Arm Shaft Support

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 4.8L V8	12742404	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Rocker Arm Shaft supports.

Rocker Arm Stud

Brand	Part Number	Markets	Notes	Buy
ARP Fits: 4.8L V8	2347207	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 4.8L V8	MRDS100HP	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING MRDS100HP High PerformanceNo Warranty 3/8-24 Rocker Nut Thread8mm-1.25X2.300 Base Thread	View on Amazon

This table covers the Rocker Arm studs.

Timing Chain

High Performance

Brand	Part Number	Markets	Notes	Buy
CLOYES Popular Fits: 4.8L V8	9304	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9304 High Performance Center60 Links, Single Roller	View on Amazon
CLOYES Fits: 4.8L V8	9303	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9303 High Performance CenterReplacement High Performance "Z" Chain, 60 Links, Single Roller	View on Amazon
CLOYES Fits: 4.8L V8	9302	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9302 High Performance Center62 Links, Single Roller	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
CLOYES Popular Fits: 4.8L V8	94205	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Popular Fits: 4.8L V8	3SRH60	🇺🇸 US 🇨🇦 CA		View on Amazon
ACDELCO Fits: 4.8L V8	12646386	🇺🇸 US 🇨🇦 CA	GM Original Equipment	View on Amazon
CLOYES Fits: 4.8L V8	93035	🇺🇸 US 🇨🇦 CA	Centerwith Single Roller Chain Fitment notes — CLOYES 93035 Centerwith Single Roller Chain0.005 in Undersize	View on Amazon
GM GENUINE Fits: 4.8L V8	12646387	🇺🇸 US 🇨🇦 CA		View on Amazon
INA Fits: 4.8L V8	ZC94205	🇺🇸 US 🇨🇦 CA	Timing Chain Type: Simplex	View on Amazon
PREFERRED COMPONENTS INC Fits: 4.8L V8	C1360	🇺🇸 US 🇨🇦 CA		View on Amazon
S.A. GEAR Fits: 4.8L V8	3SRH60	🇺🇸 US 🇨🇦 CA	Chain	View on Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Economy

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	33SRH60SDHVVT	🇺🇸 US 🇨🇦 CA	Service GradeIncludes Variable Valve Timing (VVT) Sprocket	View on Amazon
GATES Fits: 4.8L V8	CHK138	🇺🇸 US 🇨🇦 CA	Includes Timing Chain, Tensioner, Sprocket	View on Amazon
MELLING Fits: 4.8L V8	33SRH60HVVT1	🇺🇸 US 🇨🇦 CA	Service GradeIncludes Variable Valve Timing (VVT) Oil Control Valve, Variable Valve Timing (VVT) Sprocket	View on Amazon
PREFERRED COMPONENTS INC Fits: 4.8L V8	TS11361	🇺🇸 US 🇨🇦 CA	Does Not Include Variable Valve Timing (VVT) Sprocket	View on Amazon
PREFERRED COMPONENTS INC Fits: 4.8L V8	TS11360	🇺🇸 US 🇨🇦 CA	Variable Valve Timing (VVT) Sprocket Included Fitment notes — PREFERRED COMPONENTS INC TS11360 Variable Valve Timing (VVT) Sprocket Included Do Not Re-Use VVT Oil Control ValveMust Be Replaced Upon Re-Assembly	View on Amazon
S.A. GEAR Fits: 4.8L V8	76230T	🇺🇸 US 🇨🇦 CA	Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Tensioner Fitment notes — S.A. GEAR 76230T Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Tensioner Does Not Include Cam Sprocket	View on Amazon
S.A. GEAR Fits: 4.8L V8	76230TV	🇺🇸 US 🇨🇦 CA	Includes Chain, Crank Sprocket, Tensioner, VVT Cam	View on Amazon
S.A. GEAR Fits: 4.8L V8	76230TVV	🇺🇸 US 🇨🇦 CA	Includes Chain, Crank Sprocket, Tensioner, VVT Cam, VVT Oil Control Valve	View on Amazon
ULTRA-POWER Fits: 4.8L V8	33SRH60SD	🇺🇸 US 🇨🇦 CA	Variable Valve Timing (VVT) Sprocket Not Included	View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
CLOYES Fits: 4.8L V8	93673TX9Z	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 9 Keyways Fitment notes — CLOYES 93673TX9Z Race BilletContains Crank Sprocket with 9 Keyways with 1 Bolt, 4 Sensor Hubwith "Z" Racing Chain	View on Amazon
CLOYES Fits: 4.8L V8	93673TX9ZR	🇺🇸 US 🇨🇦 CA	Race Billet, with "Z" Chain Fitment notes — CLOYES 93673TX9ZR Race Billet, with "Z" Chain with 1 Bolt, 4 Sensor Hubwith .390" Raised Camshaft Engine	View on Amazon
CLOYES Fits: 4.8L V8	93673TX3Z	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 3 Keyways Fitment notes — CLOYES 93673TX3Z Race BilletContains Crank Sprocket with 3 Keyways with 1 Bolt, 4 Sensor Hubwith "Z" Racing Chain	View on Amazon
CLOYES Fits: 4.8L V8	93673TX3ZR	🇺🇸 US 🇨🇦 CA	Race Billet Fitment notes — CLOYES 93673TX3ZR Race Billet with 1 Bolt, 4 Sensor Hubwith .390" Raised Camshaft Engine	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
CLOYES Popular Fits: 4.8L V8	94205SB	🇺🇸 US 🇨🇦 CA	Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket Fitment notes — CLOYES 94205SB Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket without Camshaft Gear	View on Amazon
ENGINETECH Popular Fits: 4.8L V8	TS1360	🇺🇸 US 🇨🇦 CA	Includes Crank SprocketIncludes crank sprocket, chain & tensioner/guide assembly Fitment notes — ENGINETECH TS1360 Includes Crank SprocketIncludes crank sprocket, chain & tensioner/guide assemblyVVT cam sprocket Not included Engine VIN code Awith VVTwithout Cam SprocketIncludes chain, crank sprocket & tensioner/guide assembly	View on Amazon
MELLING Popular Fits: 4.8L V8	33SRH60SD	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Popular Fits: 4.8L V8	TOPK1000HV	🇺🇸 US 🇨🇦 CA	18% Additional Volume Over Stock Oil PumpIncludes M295HV High Volume Oil Pump, Variable Valve Timing (VVT) Sprocket and VVT Oil Control Valve	View on Amazon
CLOYES Fits: 4.8L V8	93673TX3	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 3 Keyways Fitment notes — CLOYES 93673TX3 Race BilletContains Crank Sprocket with 3 Keyways with 1 Bolt, 4 Sensor Hubwith Single Roller Chain	View on Amazon
CLOYES Fits: 4.8L V8	93673TX9	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 9 Keyways Fitment notes — CLOYES 93673TX9 Race BilletContains Crank Sprocket with 9 Keyways with 1 Bolt, 4 Sensor Hubwith Single Roller Chain	View on Amazon
INA Fits: 4.8L V8	ZC94205SB	🇺🇸 US 🇨🇦 CA	Kit Contains 1 Chain, 1 Crankshaft Sprocket, 1 TensionerDoes Not Include Cam Sprocket Fitment notes — INA ZC94205SB Kit Contains 1 Chain, 1 Crankshaft Sprocket, 1 TensionerDoes Not Include Cam Sprocket Does not include Camshaft Sprocket Option	View on Amazon
INA Fits: 4.8L V8	ZC93673TX9	🇺🇸 US 🇨🇦 CA	Includes 1 Chain, 1 Crank Sprocket, 1 Cam Sprocket, 1 Single Roller 250	View on Amazon
MELLING Fits: 4.8L V8	TOPK1000	🇺🇸 US 🇨🇦 CA	Includes Oil Pump, Variable Valve Timing (VVT) Sprocket and VVT Oil Control Valve	View on Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Cover Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	B81070	🇺🇸 US 🇨🇦 CA	Extended Cargo VanBody code: G234	View on Amazon

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Chain Tensioner

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	BT5490	🇺🇸 US 🇨🇦 CA		View on Amazon
CLOYES Fits: 4.8L V8	95490	🇺🇸 US 🇨🇦 CA	Inner	View on Amazon
ENGINETECH Fits: 4.8L V8	TT5490	🇺🇸 US	Engine VIN code Awith VVT Fitment notes — ENGINETECH TT5490 Engine VIN code Awith VVTTensioner/guide assembly	View on Amazon
GM GENUINE Fits: 4.8L V8	12626407	🇺🇸 US 🇨🇦 CA	Includes Bolt, RetainerKit	View on Amazon
PREFERRED COMPONENTS INC Fits: 4.8L V8	T66092	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Cover

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	635517	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	12594939	🇺🇸 US 🇨🇦 CA	Front	View on Amazon

This table covers the Timing covers.

Timing Cover Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	TCS45993	🇺🇸 US 🇨🇦 CA	Must Use with Part Number(s) OS 30693 R	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	JV5158	🇺🇸 US 🇨🇦 CA	SetMolded Rubber Fitment notes — MAHLE / CLEVITE JV5158 SetMolded RubberIncludes Water Pump Gaskets, and Seal Requires Oil Pan Set	View on Amazon
SKP Popular Fits: 4.8L V8	SKTCS45993	🇺🇸 US 🇨🇦 CA	Gasket Kit Fitment notes — SKP SKTCS45993 Gasket Kit Timing Cover Gasket, Water Pump Gaskets, and Seal	View on Amazon
APEX Fits: 4.8L V8	ATC3710	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 4.8L V8	948280	🇺🇸 US 🇨🇦 CA	Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	231390	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Bolts/Screws Fitment notes — ELRING 231390 with Crankshaft Seal, Bolts/Screws Extended Cargo VanBody code: G234	View on Amazon
ENGINETECH Fits: 4.8L V8	TCG293A	🇺🇸 US	Metal / Rubber Fitment notes — ENGINETECH TCG293A Metal / Rubber Engine VIN code J,W	View on Amazon
ENGINETECH Fits: 4.8L V8	TCC293A	🇺🇸 US		View on Amazon
FEL-PRO Fits: 4.8L V8	TCS459931	🇺🇸 US 🇨🇦 CA	Must Use with Part Number(s) OS 30693 RCamshaft sensor, Flow valve connector, Vacuum pump gaskets included	View on Amazon
GM GENUINE Fits: 4.8L V8	12735382	🇺🇸 US 🇨🇦 CA	Crankshaft Seal Included: No	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	JV5022	🇺🇸 US 🇨🇦 CA	Set Fitment notes — MAHLE / CLEVITE JV5022 Set Requires Oil Pan Set	View on Amazon
SKP Fits: 4.8L V8	SK12633904	🇺🇸 US 🇨🇦 CA	Gasket Only Fitment notes — SKP SK12633904 Gasket Only Timing Cover Gasket Only	View on Amazon
ULTRA-POWER Fits: 4.8L V8	TCS45993	🇺🇸 US 🇨🇦 CA	Set Fitment notes — ULTRA-POWER TCS45993 Set Must Use with #(S) OS 30693 R	View on Amazon
VICTOR REINZ Fits: 4.8L V8	151019801	🇺🇸 US 🇨🇦 CA	Set	View on Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
SCHAEFFLER Fits: 4.8L V8	SR3913	🇺🇸 US 🇨🇦 CA	22.99 mm Width62 mm Outside Diameter Fitment notes — SCHAEFFLER SR3913 22.99 mm Width62 mm Outside Diameter54.99 mm Inside Diameter	View on Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Seal

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	S5673	🇺🇸 US		View on Amazon
GM GENUINE Fits: 4.8L V8	29602	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
SKF Fits: 4.8L V8	21605	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Crank Sprocket

Brand	Part Number	Markets	Buy
GM GENUINE Popular Fits: 4.8L V8	12556582	🇺🇸 US 🇨🇦 CA	View on Amazon
MELLING Popular Fits: 4.8L V8	S827	🇺🇸 US 🇨🇦 CA	View on Amazon
CLOYES Fits: 4.8L V8	S827	🇺🇸 US 🇨🇦 CA	View on Amazon
INA Fits: 4.8L V8	ZSS827	🇺🇸 US 🇨🇦 CA	View on Amazon
PREFERRED COMPONENTS INC Fits: 4.8L V8	G55827	🇺🇸 US 🇨🇦 CA	View on Amazon
S.A. GEAR Fits: 4.8L V8	S827	🇺🇸 US 🇨🇦 CA	View on Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Turbocharger Wastegate Solenoid / Actuator

Brand	Part Number	Markets	Notes	Buy
WELLS Fits: 4.8L V8	5S11636	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Valley Pan Cover

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	615266	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 4.8L V8	12598832	🇺🇸 US 🇨🇦 CA	Configuration: Multi PieceIncludes Cover, Bolts, Gasket, and Seal Fitment notes — GM GENUINE 12598832 Configuration: Multi PieceIncludes Cover, Bolts, Gasket, and Seal INCLUDES COVER,BOLTS,GASKET,SEAL	View on Amazon
SKP Fits: 4.8L V8	SK615832	🇺🇸 US 🇨🇦 CA	Includes Cover, Bolts, Gasket, Seal	View on Amazon

This table covers the Valley Pan covers.

Valve Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	12642655	🇺🇸 US 🇨🇦 CA	LeftINCLUDES COVER,GASKET,BOLT,DEFLECTOR,FITTING	View on Amazon
DORMAN Fits: 4.8L V8	264994	🇺🇸 US 🇨🇦 CA	Right	View on Amazon
DORMAN Fits: 4.8L V8	264969	🇺🇸 US 🇨🇦 CA	Left	View on Amazon
SKP Fits: 4.8L V8	SK264969	🇺🇸 US 🇨🇦 CA	Left	View on Amazon
SKP Fits: 4.8L V8	SK264994	🇺🇸 US 🇨🇦 CA	Includes Gasket Fitment notes — SKP SK264994 Includes Gasket RightBase Model	View on Amazon

This table covers the Valve covers.

Valve Cover Bolt / Screw

Brand	Part Number	Markets	Notes	Buy
ARP Fits: 4.8L V8	4347505	🇺🇸 US 🇨🇦 CA	Stainless Steel Hex Bolt Head Fitment notes — ARP 4347505 Stainless Steel Hex Bolt Head Engine Designation: GENIII IV/LSBlock with 0.750" Spacer	View on Amazon
ARP Fits: 4.8L V8	4347504	🇺🇸 US 🇨🇦 CA	Block with 0.375" spacer12 Point Bolt Head Fitment notes — ARP 4347504 Block with 0.375" spacer12 Point Bolt Head Engine Designation: GENIII IV/LS	View on Amazon
ARP Fits: 4.8L V8	4347506	🇺🇸 US 🇨🇦 CA	Block with 0.750" spacer12 Point Bolt Head Fitment notes — ARP 4347506 Block with 0.750" spacer12 Point Bolt Head Engine Designation: GENIII IV/LS	View on Amazon
GM GENUINE Fits: 4.8L V8	12577215	🇺🇸 US 🇨🇦 CA	with Grommet,SleeveM6.0X1.0	View on Amazon

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.

Valve Cover Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	VS50504R	🇺🇸 US 🇨🇦 CA	Permadry RubberValve Cover Grommets Not Included	View on Amazon
FEL-PRO Popular Fits: 4.8L V8	VS50504R1	🇺🇸 US 🇨🇦 CA	Permadry Molded RubberIncludes Valve Cover Grommets	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	VS50250A	🇺🇸 US 🇨🇦 CA	SetMolded Rubber Fitment notes — MAHLE / CLEVITE VS50250A SetMolded RubberIncludes Valve Cover Grommets	View on Amazon
APEX Fits: 4.8L V8	AVC371	🇺🇸 US 🇨🇦 CA	Does Not Include Grommets	View on Amazon
APEX Fits: 4.8L V8	AVC371S	🇺🇸 US 🇨🇦 CA	Includes Grommets	View on Amazon
ELRING Fits: 4.8L V8	876270	🇺🇸 US 🇨🇦 CA	Material: Polyacrylate Rubber (ACM) Fitment notes — ELRING 876270 Material: Polyacrylate Rubber (ACM) Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	838210	🇺🇸 US 🇨🇦 CA	Material: Multiple Fitment notes — ELRING 838210 Material: Multiple Extended Cargo VanBody code: G234	View on Amazon
ENGINETECH Fits: 4.8L V8	VCC293A	🇺🇸 US	SetIncludes Grommets	View on Amazon
GM GENUINE Fits: 4.8L V8	12637683	🇺🇸 US 🇨🇦 CA	Sold Individually	View on Amazon
MAHLE / CLEVITE Fits: 4.8L V8	VS50250	🇺🇸 US 🇨🇦 CA	SetMolded Rubber	View on Amazon
VICTOR REINZ Fits: 4.8L V8	151066301	🇺🇸 US 🇨🇦 CA	SetValve Cover Grommets Not Included	View on Amazon
VICTOR REINZ Fits: 4.8L V8	151041601	🇺🇸 US 🇨🇦 CA	SetIncludes Grommets Fitment notes — VICTOR REINZ 151041601 SetIncludes Grommets Grommets Included	View on Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Grommet

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Popular Fits: 4.8L V8	GS33466	🇺🇸 US 🇨🇦 CA	KitSet Fitment notes — MAHLE / CLEVITE GS33466 KitSetMolded Rubber	View on Amazon
APEX Fits: 4.8L V8	AES308	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
ELRING Fits: 4.8L V8	875380	🇺🇸 US 🇨🇦 CA	Material: MVQ (silicone rubber) Fitment notes — ELRING 875380 Material: MVQ (silicone rubber) Extended Cargo VanBody code: G234	View on Amazon
FEL-PRO Fits: 4.8L V8	ES72233	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
VICTOR REINZ Fits: 4.8L V8	151014201	🇺🇸 US 🇨🇦 CA	Set	View on Amazon

This table covers the Valve Cover grommets.

Valve Guide

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	GD3053	🇺🇸 US	Iron Fitment notes — ENGINETECH GD3053 Iron Intake and Exhaust .3154 X .5000 X 2.115Spiral ID	View on Amazon
QUALCAST Fits: 4.8L V8	303053	🇺🇸 US 🇨🇦 CA	2.115 OAL. 0.3154 I.D. 0.500 O.D.	View on Amazon
QUALCAST Fits: 4.8L V8	303053H	🇺🇸 US 🇨🇦 CA	2.115 OAL. 0.3154 I.D. 0.500 O.D. Hardened	View on Amazon
SBI Fits: 4.8L V8	1403053	🇺🇸 US 🇨🇦 CA	Intake or ExhaustBase Model Fitment notes — SBI 1403053 Intake or ExhaustBase Model0.3154 I.D.0.5000 O.D.2.115 Length1-SR Type+2 O/S Available (140-3053+2)	View on Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Economy

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Fits: 4.8L V8	2131738	🇺🇸 US 🇨🇦 CA	Hydraulic Fitment notes — MAHLE / CLEVITE 2131738 Hydraulic Fits: with rolleror Lifter Type: Hydraulic Roller	View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 4.8L V8	291009	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 291009 High Performance 0.840" Hydraulic Roller LifterRequires The Use of Roller CamshaftFor High Performance Applications OnlyFor engines originally equipped with hydraulic roller liftersPush Rod Length Must be CheckedLength 2.590"Proprietary Tie-Bar system	View on Amazon
MELLING Fits: 4.8L V8	293126LS	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 293126LS High Performance 0.840" Hydraulic Roller LifterRequires The Use of Roller CamshaftFor High Performance Applications OnlyFor engines originally equipped with hydraulic roller liftersPush Rod Length Must be CheckedLength 3.335"Proprietary Tie-Bar system	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	L2281	🇺🇸 US	HydraulicRoller Follower Fitment notes — ENGINETECH L2281 HydraulicRoller Follower Engine VIN code A,C,F	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	12698945	🇺🇸 US 🇨🇦 CA	LIFTERS ONLYNON-ACTIVE FUEL MANAGEMENT LIFTER	View on Amazon
MELLING Popular Fits: 4.8L V8	JB2079	🇺🇸 US 🇨🇦 CA	Hydraulic	View on Amazon
ENGINETECH Fits: 4.8L V8	LG2281K	🇺🇸 US	KitContains L2281-16, EG365-4 Fitment notes — ENGINETECH LG2281K KitContains L2281-16, EG365-4Roller FollowerHydraulic VIN code A,C,F Contains L2281-16, EG365-4	View on Amazon
MELLING Fits: 4.8L V8	JBK8100	🇺🇸 US 🇨🇦 CA	Kit	View on Amazon
QUALCAST Fits: 4.8L V8	362148	🇺🇸 US 🇨🇦 CA	Hydraulic Roller Fitment notes — QUALCAST 362148 Hydraulic Roller Non-AFM.	View on Amazon
SBI Fits: 4.8L V8	VL559	🇺🇸 US 🇨🇦 CA	Intake or ExhaustBase Model Fitment notes — SBI VL559 Intake or ExhaustBase Model0.842 Body Diameter2.600 LengthHydraulic Roller TypeOil Hole is Positioned In Line with Roller Pin.Non-Active Fuel ManagementOEM # 17122490	View on Amazon
SEALED POWER Fits: 4.8L V8	HT2148AB	🇺🇸 US 🇨🇦 CA	Hydraulic Roller Lifters Fitment notes — SEALED POWER HT2148AB Hydraulic Roller Lifters Non Active Fuel Management EngineRiveted Retaining Pin	View on Amazon
SEALED POWER Fits: 4.8L V8	HT2148A	🇺🇸 US 🇨🇦 CA	Hydraulic Roller Lifters Fitment notes — SEALED POWER HT2148A Hydraulic Roller Lifters Non Active Fuel Management EngineRiveted Retaining Pin	View on Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Lifter Guide

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 4.8L V8	EG365	🇺🇸 US 🇨🇦 CA	Composite Fitment notes — ENGINETECH EG365 Composite Fits: Engine VIN code A,C,F,V# 12591536 or: Complete lifter guide SetEngine VIN code A,C,F,VComposite Lifter Guides# 12591536	View on Amazon
GM GENUINE Fits: 4.8L V8	12595365	🇺🇸 US 🇨🇦 CA	Tray Fitment notes — GM GENUINE 12595365 Tray Accommodates 4 Valve Lifters Each, with Side Grooves	View on Amazon
MELLING Fits: 4.8L V8	MLG100	🇺🇸 US 🇨🇦 CA		View on Amazon
SBI Fits: 4.8L V8	VL559G	🇺🇸 US 🇨🇦 CA	Intake or ExhaustBase Model Fitment notes — SBI VL559G Intake or ExhaustBase ModelNon-AFM Lifter GuideOEM # 12595365	View on Amazon

This table covers the guides that keep each lifter aligned.

Valve Seat

Brand	Part Number	Markets	Notes	Buy
QUALCAST Popular Fits: 4.8L V8	21162564	🇺🇸 US 🇨🇦 CA	INSERT Fitment notes — QUALCAST 21162564 INSERT Exhaust1.335T I.D. 1-5/8 O.D. 0.420 Depth	View on Amazon
SBI Popular Fits: 4.8L V8	SB162564	🇺🇸 US 🇨🇦 CA	High ChromeFor Aluminum Cylinder Head Fitment notes — SBI SB162564 High ChromeFor Aluminum Cylinder Head ExhaustBase Model1-5/8 O.D.1.335T I.D.0.4200 Depth	View on Amazon
ENGINETECH Fits: 4.8L V8	ST162564	🇺🇸 US	Hi-Chrome1.335/1.387T X 1.6320 X .4200" Fitment notes — ENGINETECH ST162564 Hi-Chrome1.335/1.387T X 1.6320 X .4200" Exhaust45 Degree	View on Amazon
QUALCAST Fits: 4.8L V8	21206251	🇺🇸 US 🇨🇦 CA	INSERT Fitment notes — QUALCAST 21206251 INSERT Intake1.750 I.D. 2-1/16 O.D. 0.390 Depth	View on Amazon
QUALCAST Fits: 4.8L V8	21162564N	🇺🇸 US 🇨🇦 CA	INSERT Fitment notes — QUALCAST 21162564N INSERT Exhaust1.335T I.D. 1-5/8 O.D. 0.420 Depth. LPG	View on Amazon
SBI Fits: 4.8L V8	SB162564N	🇺🇸 US 🇨🇦 CA	Non-MagneticStar Series Super Premium Nickel Fitment notes — SBI SB162564N Non-MagneticStar Series Super Premium NickelFor Aluminum Cylinder Head ExhaustBase Model1-5/8 O.D.1.335T I.D.0.4200 DepthLPG	View on Amazon

This table covers the Valve seats.

Valve Spring

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	466594	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466594 High PerformanceNo Warranty 151 Pounds At 1.800 Inches417 Pounds At 1.15 InchesSpring Rate: 409 PoundsMax Lift: 0.650"Solid Height: 1.080"1.304 Inch Out Side Spring O.D.0.670 Inner Spring I.D.	View on Amazon
MELLING Popular Fits: 4.8L V8	466524	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466524 High PerformanceNo Warranty Up to 0.600 lift	View on Amazon
MELLING Fits: 4.8L V8	466564	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466564 High PerformanceNo Warranty Closed Pressure And Length Is 147 @ 1.800Open Pressure And Length Is 406 @ 1.230with Dual Springs	View on Amazon
MELLING Fits: 4.8L V8	466734	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466734 High PerformanceNo Warranty Dual SpringO.D. 1.295"I.D. 0.676"Closed Pressure and Length 125.4 @ 1.800Open Pressure and Length 370.4 @ 1.150Solid Height 1.100 Inches	View on Amazon
MELLING Fits: 4.8L V8	461218	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 461218 High Performance Not For Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 4.8L V8	466944	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466944 High PerformanceNo Warranty Single SpringO.D. 1.300"I.D. 0.675"Closed Pressure and Length 125 @ 1.800Open Pressure and Length 370 @ 1.150Solid Height 1.000 Inches	View on Amazon
MELLING Fits: 4.8L V8	225716	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 225716 High PerformanceNo Warranty Set of 16Installed Pressure 95 PSIOpen Pressure 300 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 4.8L V8	461208	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 461208 High PerformanceNo Warranty Dual SpringO.D. 1.350"I.D. 0.704"Closed Pressure and Length 160 @ 1.800Open Pressure and Length 482 @ 1.100Solid Height 1.045 Inches	View on Amazon
MELLING Fits: 4.8L V8	461219	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 461219 High PerformanceNo Warranty Closed Pressure And Length Is 135 @ 1.800Open Pressure And Length Is 348 @ 1.175with Dual Springs	View on Amazon
MELLING Fits: 4.8L V8	4669416	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 4669416 High Performance Set of 16Installed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: 4.8L V8	VSK46659	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46659 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 151 PSIOpen Pressure 417 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 4.8L V8	VSK2257	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK2257 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Steel RetainersClosed Pressure 95.0 PSIOpen Pressure 300.0 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 4.8L V8	VSK46656	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46656 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 147 PSIOpen Pressure 406 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 4.8L V8	VSK461208	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK461208 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 160 PSIOpen Pressure 482 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 4.8L V8	VSK461219	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK461219 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Steel RetainersClosed Pressure 135.0 PSIOpen Pressure 348.0 PSI	View on Amazon
MELLING Fits: 4.8L V8	VSK46652	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46652 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Steel RetainersClosed Pressure 130.0 PSIOpen Pressure 325.4 PSIUp To 0.600 Lift	View on Amazon
MELLING Fits: 4.8L V8	VSK46694	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46694 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Steel RetainersClosed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: 4.8L V8	VSK46673	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46673 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 125 PSIOpen Pressure 370 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 4.8L V8	VSK2257T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK2257T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Titanium RetainersClosed Pressure 95.0 PSIOpen Pressure 300.0 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 4.8L V8	VSK461208T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK461208T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 160 PSIOpen Pressure 482 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 4.8L V8	VSK46659T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46659T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 151 PSIOpen Pressure 417 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 4.8L V8	VSK461219T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK461219T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Titanium RetainersClosed Pressure 135.0 PSIOpen Pressure 348.0 PSI	View on Amazon
MELLING Fits: 4.8L V8	VSK46656T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46656T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 147 PSIOpen Pressure 406 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 4.8L V8	VSK46652T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46652T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Titanium RetainersClosed Pressure 130.0 PSIOpen Pressure 325.4 PSIUp To 0.600 Lift	View on Amazon
MELLING Fits: 4.8L V8	VSK46694T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46694T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Titanium RetainersClosed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: 4.8L V8	VSK46697T	🇺🇸 US 🇨🇦 CA	High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46697T High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersSuper Finished Valve Spring Installed Pressure 151 PSIOpen Pressure 417 PSI	View on Amazon
MELLING Fits: 4.8L V8	VSK46673T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46673T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 125 PSIOpen Pressure 370 PSIStandard Finished Valve Spring	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 4.8L V8	ERV3598	🇺🇸 US 🇨🇦 CA	Conical Fitment notes — ENGINETECH ERV3598 Conical Fits: Intake and Exhaust 2.126 Free HT or: Intake and ExhaustIntake and Exhaust 2.126 Free HT	View on Amazon
GM GENUINE Popular Fits: 4.8L V8	12706568	🇺🇸 US 🇨🇦 CA	Spring Type: Single	View on Amazon
MELLING Popular Fits: 4.8L V8	VS2254	🇺🇸 US 🇨🇦 CA	Not For Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Popular Fits: 4.8L V8	VS2257	🇺🇸 US 🇨🇦 CA	For Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 4.8L V8	VTSS100	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING VTSS100 High Performance Setup Spring	View on Amazon
MELLING Fits: 4.8L V8	46697	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 46697 High Performance Closed Pressure 151 PSIStainless Steel Dual springs	View on Amazon
MELLING Fits: 4.8L V8	VSK46697	🇺🇸 US 🇨🇦 CA	High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46697 High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersSuper Finished Valve Spring Installed Pressure 151 PSIOpen Pressure 417 PSI	View on Amazon
QUALCAST Fits: 4.8L V8	3204046	🇺🇸 US 🇨🇦 CA	2.126 Free Length. Conical	View on Amazon
SBI Fits: 4.8L V8	1601488	🇺🇸 US 🇨🇦 CA	Intake or ExhaustBase Model Fitment notes — SBI 1601488 Intake or ExhaustBase Model2.130 Length1.257T O.D.0.845T I.DConical	View on Amazon
SKP Fits: 4.8L V8	SKST2151	🇺🇸 US 🇨🇦 CA		View on Amazon

Brand	Part Number	Markets	Notes	Buy
SKP Fits: 4.8L V8	SKERV880	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	10166344	🇺🇸 US 🇨🇦 CA	EXH	View on Amazon
MELLING Popular Fits: 4.8L V8	475264	🇺🇸 US 🇨🇦 CA	High PerformanceHardened Steel Fitment notes — MELLING 475264 High PerformanceHardened SteelNo Warranty For Use with Beehive Springs	View on Amazon
MELLING Fits: 4.8L V8	VSR709	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 4.8L V8	475274	🇺🇸 US 🇨🇦 CA	High PerformanceHardened Steel Fitment notes — MELLING 475274 High PerformanceHardened SteelNo Warranty For Use with Dual Springs	View on Amazon
MELLING Fits: 4.8L V8	475284	🇺🇸 US 🇨🇦 CA	High PerformanceTitanium Fitment notes — MELLING 475284 High PerformanceTitaniumNo Warranty For Use with Beehive Springs	View on Amazon
MELLING Fits: 4.8L V8	475294	🇺🇸 US 🇨🇦 CA	High PerformanceTitanium Fitment notes — MELLING 475294 High PerformanceTitaniumNo Warranty For Use with Dual Springs	View on Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 4.8L V8	VL760	🇺🇸 US 🇨🇦 CA		View on Amazon
ENGINETECH Fits: 4.8L V8	EPC291	🇺🇸 US	Single Round Groove	View on Amazon
GM GENUINE Fits: 4.8L V8	10166345	🇺🇸 US 🇨🇦 CA	Material: Alloy Steel	View on Amazon
QUALCAST Fits: 4.8L V8	345005	🇺🇸 US 🇨🇦 CA	0.314 Stem. Round Bead In Middle.	View on Amazon
SBI Fits: 4.8L V8	1211085	🇺🇸 US 🇨🇦 CA	Intake or ExhaustBase Model Fitment notes — SBI 1211085 Intake or ExhaustBase Model0.2900 Length1 Round bead type0.3100 I.D.	View on Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 4.8L V8	SS71039	🇺🇸 US 🇨🇦 CA	Set Fitment notes — FEL-PRO SS71039 Set Intake and Exhaust	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	SS45921	🇺🇸 US 🇨🇦 CA	Metal with Molded RubberSet Fitment notes — MAHLE / CLEVITE SS45921 Metal with Molded RubberSet IntakePositive type	View on Amazon
MAHLE / CLEVITE Popular Fits: 4.8L V8	SS45920	🇺🇸 US 🇨🇦 CA	SetMetal with Molded Rubber Fitment notes — MAHLE / CLEVITE SS45920 SetMetal with Molded Rubber ExhaustPositive Type	View on Amazon
APEX Fits: 4.8L V8	AVS3072	🇺🇸 US 🇨🇦 CA	Set Fitment notes — APEX AVS3072 Set Intake and Exhaust	View on Amazon
ELRING Fits: 4.8L V8	876100	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,1 Fitment notes — ELRING 876100 Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,1Valve Stem Diameter [MM]: 8,5 Extended Cargo VanBody code: G234	View on Amazon
ELRING Fits: 4.8L V8	876110	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,2 Fitment notes — ELRING 876110 Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,2Valve Stem Diameter [MM]: 8,5 Extended Cargo VanBody code: G234	View on Amazon
GM GENUINE Fits: 4.8L V8	12482063	🇺🇸 US 🇨🇦 CA	SetContains 8 Seals Fitment notes — GM GENUINE 12482063 SetContains 8 Seals Intake14.4mm	View on Amazon
GM GENUINE Fits: 4.8L V8	12482062	🇺🇸 US 🇨🇦 CA	SetContains 8 Seals Fitment notes — GM GENUINE 12482062 SetContains 8 Seals Exhaust22.8MM	View on Amazon
QUALCAST Fits: 4.8L V8	3880555	🇺🇸 US 🇨🇦 CA	Viton Metal Clad Fitment notes — QUALCAST 3880555 Viton Metal Clad Viton Metal Clad	View on Amazon
QUALCAST Fits: 4.8L V8	3890045	🇺🇸 US 🇨🇦 CA	Viton Top Hat Fitment notes — QUALCAST 3890045 Viton Top Hat Exhaust	View on Amazon
QUALCAST Fits: 4.8L V8	3890145	🇺🇸 US 🇨🇦 CA	Viton Top Hat Fitment notes — QUALCAST 3890145 Viton Top Hat Intake	View on Amazon
SBI Fits: 4.8L V8	1221337	🇺🇸 US 🇨🇦 CA	IntakeBase Model Fitment notes — SBI 1221337 IntakeBase ModelViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter	View on Amazon
SBI Fits: 4.8L V8	1221338	🇺🇸 US 🇨🇦 CA	ExhaustBase Model Fitment notes — SBI 1221338 ExhaustBase ModelViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter	View on Amazon
ULTRA-POWER Fits: 4.8L V8	SS71039	🇺🇸 US 🇨🇦 CA	SetPremium Valve Stem Seals Included Fitment notes — ULTRA-POWER SS71039 SetPremium Valve Stem Seals Included16 Pieces EXHAUSTINTAKE	View on Amazon
VICTOR REINZ Fits: 4.8L V8	121003401	🇺🇸 US 🇨🇦 CA	SetContains 16 Pieces Fitment notes — VICTOR REINZ 121003401 SetContains 16 PiecesImproved Design Intake and Exhaust	View on Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Economy

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: 4.8L V8	916886XD	🇺🇸 US 🇨🇦 CA	OE FixAdjuster Magnet Fitment notes — DORMAN 916886XD OE FixAdjuster Magnet IMPROVED DESIGN	View on Amazon
DORMAN Fits: 4.8L V8	916865	🇺🇸 US 🇨🇦 CA	Oil Control	View on Amazon
GATES Fits: 4.8L V8	VVS273	🇺🇸 US 🇨🇦 CA	Oil Control Valve	View on Amazon
HOLSTEIN Fits: 4.8L V8	2VTS0059	🇺🇸 US 🇨🇦 CA		View on Amazon
ROSTRA Fits: 4.8L V8	790065	🇺🇸 US 🇨🇦 CA	Oil Control	View on Amazon
WALKER PRODUCTS Fits: 4.8L V8	5901191	🇺🇸 US 🇨🇦 CA		View on Amazon
WELLS Fits: 4.8L V8	2T1031	🇺🇸 US 🇨🇦 CA	Oil Control	View on Amazon
WELLS Fits: 4.8L V8	2T1241	🇺🇸 US 🇨🇦 CA	Adjuster Magnet	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	12653140	🇺🇸 US 🇨🇦 CA	Adjuster Magnet Fitment notes — GM GENUINE 12653140 Adjuster Magnet MUST Use with 12663001	View on Amazon
MELLING Popular Fits: 4.8L V8	VCTO1000	🇺🇸 US 🇨🇦 CA	Oil Control	View on Amazon
GM GENUINE Fits: 4.8L V8	12682000	🇺🇸 US 🇨🇦 CA	Thread Size: .629	View on Amazon
S.A. GEAR Fits: 4.8L V8	S1434S	🇺🇸 US 🇨🇦 CA	Oil Control Fitment notes — S.A. GEAR S1434S Oil Control Oil Control Valve	View on Amazon
STANDARD MOTOR PRODUCTS Fits: 4.8L V8	VVT324	🇺🇸 US 🇨🇦 CA	Oil Control	View on Amazon
STANDARD MOTOR PRODUCTS Fits: 4.8L V8	VVT310	🇺🇸 US 🇨🇦 CA	Adjuster Magnet	View on Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 4.8L V8	858000	🇺🇸 US 🇨🇦 CA	Material: ACM (Polyacrylate) Fitment notes — ELRING 858000 Material: ACM (Polyacrylate) Extended Cargo VanBody code: G234Adjuster Seal	View on Amazon
ELRING Fits: 4.8L V8	B37380	🇺🇸 US 🇨🇦 CA	Extended Cargo VanBody code: G234	View on Amazon
GM GENUINE Fits: 4.8L V8	12594339	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Sprocket

Economy

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 4.8L V8	918186	🇺🇸 US 🇨🇦 CA		View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 4.8L V8	12606358	🇺🇸 US 🇨🇦 CA	Mount Hole Diameter (mm): 21.009mm	View on Amazon
MELLING Popular Fits: 4.8L V8	VCTA1007H	🇺🇸 US 🇨🇦 CA	Service Grade	View on Amazon
CLOYES Fits: 4.8L V8	VC143	🇺🇸 US 🇨🇦 CA	Engine Variable Valve Timing (VVT) Sprocket	View on Amazon
ENGINETECH Fits: 4.8L V8	ECP1007	🇺🇸 US	Aftermarket TypeOne Per engine	View on Amazon
GATES Fits: 4.8L V8	VCP855	🇺🇸 US 🇨🇦 CA		View on Amazon
PREFERRED COMPONENTS INC Fits: 4.8L V8	G58358	🇺🇸 US 🇨🇦 CA	Do Not Re-Use VVT Oil Control ValveMust Be Replaced Upon Re-Assembly	View on Amazon
S.A. GEAR Fits: 4.8L V8	S1434	🇺🇸 US 🇨🇦 CA	Cam VVT	View on Amazon
STANDARD MOTOR PRODUCTS Fits: 4.8L V8	VVT590	🇺🇸 US 🇨🇦 CA		View on Amazon
WELLS Fits: 4.8L V8	3T1077	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the cam phaser sprockets used by the variable-valve-timing system.

Variable Valve Timing (VVT) Sprocket Bolt

Brand	Part Number	Markets	Notes	Buy
CLOYES Fits: 4.8L V8	VTS156	🇺🇸 US 🇨🇦 CA	Engine Variable Valve Timing (VVT) Sprocket Bolt	View on Amazon

This table covers the Variable Valve Timing (VVT) Sprocket bolts.