The 1930 Graham Standard has 13 ignition parts with verified fitment on this page — 6 part types and 6 brands, covering the All Engines engine. Each part includes a manufacturer part number and application notes.
On the 1930 Graham Standard, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 10 parts of the 13 listed are Ignition Coil (6 parts), Spark Plug (3 parts) and Condenser / Capacitor (1 part). The other 3 part types cover the remaining 3 parts.
Every part on this page is matched to the All Engines — the only engine offered in the 1930 Graham Standard.
The most listed brands for 1930 Graham Standard ignition parts are STANDARD MOTOR PRODUCTS (6 parts), CHAMPION (3 parts) and FVP (1 part), plus 3 more brands. Quality grades include Economy, Standard Replacement and Premium.
2 parts on this 1930 Graham Standard page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including STANDARD MOTOR PRODUCTS UC14T (Ignition Coil) and STANDARD MOTOR PRODUCTS UC14 (Ignition Coil). Click any part number to see every vehicle that part fits.
Condenser / Capacitor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | DR60T | 🇺🇸 US | T-SeriesTerminal Type: Blade, Eye-loop | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
One part is listed for the 1930 Graham Standard — STANDARD MOTOR PRODUCTS DR60T.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | DR157 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
This group shows a single part: STANDARD MOTOR PRODUCTS DR157.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | DR1819 | 🇺🇸 US | View on Amazon |
This table covers the breaker points in a points-type distributor.
One part is listed for the 1930 Graham Standard — STANDARD MOTOR PRODUCTS DR1819.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC14T | 🇺🇸 US | T-Series6 Volt | View on Amazon |
| FVP | UC14F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN | 2IGC0057 | 🇺🇸 US | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC14 | 🇺🇸 US | Blue Streak6 Volt | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS | C14 | 🇺🇸 US | View on Amazon | |
| WELLS | 5C1063 | 🇺🇸 US | Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness. | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts are listed for the 1930 Graham Standard, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS UC14T carries the "Popular" badge.
In the Economy grade, STANDARD MOTOR PRODUCTS, FVP and HOLSTEIN supply 3 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS UC14T.
The Premium section lists 1 option from STANDARD MOTOR PRODUCTS — a step above OE specification in materials, tolerances or warranty terms. STANDARD MOTOR PRODUCTS UC14 is listed in this group.
The Standard Replacement section lists 2 options from UNITED MOTOR PRODUCTS and WELLS — built to original-equipment specification. UNITED MOTOR PRODUCTS C14 is listed in this group.
Listed part numbers: STANDARD MOTOR PRODUCTS UC14T, FVP UC14F and HOLSTEIN 2IGC0057, plus the other parts above.
Ignition Coil Mounting Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | CB6 | 🇺🇸 US | View on Amazon |
This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
This group shows a single part: STANDARD MOTOR PRODUCTS CB6.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION | 516 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 541 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 561 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
3 Spark Plug parts for the 1930 Graham Standard come from CHAMPION.
Listed part numbers: CHAMPION 516, CHAMPION 541 and CHAMPION 561.
Buying Ignition Parts for a 1930 Graham Standard
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the All Engines engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1930 Graham Standard?
Our catalog currently lists 13 ignition parts for the 1930 Graham Standard across 6 subcategories and 6 brands, covering the All Engines engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1930 Graham Standard?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1930 Graham Standard?
Notes on this page include a 0.025" pre-set gap. Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1930 Graham Standard was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1930 Graham Standard?
Every part on this page is matched to the All Engines engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1930 Graham Standard
Ignition Parts for Other Graham Standard Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.