6 Electrical parts are listed for the 1933 Graham Model 57A, in 4 part types, covering the 245cid L8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1933 Graham Model 57A, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors. Most of the listed parts are Starter Bushing (2 parts), Starter Solenoid (2 parts) and Alternator / Generator Brush (1 part). The other 1 part type covers the remaining 1 part.
The 1933 Graham Model 57A came with a single engine, the 245cid L8, and every part is verified against it.
2 brands supply electrical parts for the 1933 Graham Model 57A, led by STANDARD MOTOR PRODUCTS (5 parts) and UNITED MOTOR PRODUCTS (1 part). Quality grades include Economy and Standard Replacement.
Each part number listed for the 1933 Graham Model 57A opens a page with every vehicle that part fits.
Alternator / Generator Brush
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | RX31 | 🇺🇸 US | View on Amazon |
This table covers the brushes inside the alternator.
This group shows a single part: STANDARD MOTOR PRODUCTS RX31.
Starter Brush
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | RX60 | 🇺🇸 US | Width (In): 3/4 | View on Amazon |
This table covers the brushes inside the starter motor.
One part is listed for the 1933 Graham Model 57A — STANDARD MOTOR PRODUCTS RX60.
Starter Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | X4378 | 🇺🇸 US | Direct OE Replacement Package Quantity 50 per Box Outer Diameter O D Inches 629 Material Brass Length Inches 670 Inner Diameter I D Inches 564 | View on Amazon |
| STANDARD MOTOR PRODUCTS | X4265 | 🇺🇸 US | Direct OE Replacement Outer Diameter O D Inches 565 Material Brass Length Inches 781 Inner Diameter I D Inches 5 | View on Amazon |
This table covers the Starter bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
STANDARD MOTOR PRODUCTS supplies both parts for the 1933 Graham Model 57A.
Listed part numbers: STANDARD MOTOR PRODUCTS X4378 and STANDARD MOTOR PRODUCTS X4265.
Starter Solenoid
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS | SS17 | 🇺🇸 US | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | SS529 | 🇺🇸 US | View on Amazon |
This table covers the Starter solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
2 Starter Solenoid parts for the 1933 Graham Model 57A come from 2 brands — UNITED MOTOR PRODUCTS and STANDARD MOTOR PRODUCTS.
The Economy section lists 1 option from UNITED MOTOR PRODUCTS — the catalog's value-priced group. UNITED MOTOR PRODUCTS SS17 is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS SS529.
This group includes UNITED MOTOR PRODUCTS SS17 and STANDARD MOTOR PRODUCTS SS529.
Buying Electrical Parts for a 1933 Graham Model 57A
On this vehicle, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors.
- Confirm you have the 245cid L8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Starter Bushing and Starter Solenoid .
Frequently Asked Questions
How many electrical parts fit the 1933 Graham Model 57A?
Our catalog currently lists 6 electrical parts for the 1933 Graham Model 57A across 4 subcategories and 2 brands, covering the 245cid L8 engine. Each part is matched to the engine(s) it fits.
What are the signs of electrical problems on a 1933 Graham Model 57A?
Common symptoms include slow cranking on cold mornings, a battery light that flickers, dim lights at idle, or a check-engine code pointing at a sensor circuit. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1933 Graham Model 57A was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1933 Graham Model 57A?
Every part on this page is matched to the 245cid L8 engine. Then test before replacing — a failed alternator and a bad ground can look identical, and sensors are frequently condemned for wiring faults. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1933 Graham Model 57A
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.