1981 Honda Accord Drivetrain Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 1981 Honda Accord has 24 drivetrain parts with verified fitment on this page — 3 part types and 14 brands, covering both the 1.6L L4 and the 1.8L L4. Each part includes a manufacturer part number and application notes.

On the 1981 Honda Accord, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. All 24 listed parts are Differential Carrier Bearing / Race (11 parts), CV Joint Boot (8 parts) and CV Axle (5 parts).

CV Axle

Economy

Brand Part Number Markets Notes Buy
CARDONE Fits: 1.8L L4 604030
🇺🇸 US 🇨🇦 CA
Remanufactured
Fitment notes — CARDONE 604030
Remanufactured
Front Left
View on
Amazon
CARDONE Fits: 1.8L L4 604033
🇺🇸 US 🇨🇦 CA
Remanufactured
Fitment notes — CARDONE 604033
Remanufactured
Front Right
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GSP Fits: 1.8L L4 NCV36006
🇺🇸 US 🇨🇦 CA
Front Right
View on
Amazon
TRAKMOTIVE Fits: 1.8L L4 HO8182
🇺🇸 US 🇨🇦 CA
Does Not Include ABS Ring
Fitment notes — TRAKMOTIVE HO8182
Does Not Include ABS Ring
Front Left
View on
Amazon
TRAKMOTIVE Fits: 1.8L L4 HO8193
🇺🇸 US 🇨🇦 CA
Does Not Include ABS Ring
Fitment notes — TRAKMOTIVE HO8193
Does Not Include ABS Ring
Front Right
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

CV Joint Boot

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 1.8L L4 614001
🇺🇸 US 🇨🇦 CA
Joint Diameter 3.58"Shaft End Inside Diameter .93"
Fitment notes — DORMAN 614001
Joint Diameter 3.58"Shaft End Inside Diameter .93"
Front OuterJoint Diameter 3.58"
View on
Amazon
DORMAN Popular Fits: 1.8L L4 03680
🇺🇸 US 🇨🇦 CA
OuterJoint Diameter 3.83"
View on
Amazon
AMERICAN REMANUFACTURERS INC. Fits: all 1981 Accord engines 4261030
🇺🇸 US 🇨🇦 CA
Outer
View on
Amazon
DORMAN Fits: 1.8L L4 614002
🇺🇸 US 🇨🇦 CA
Joint Diameter 3.3"Shaft End Inside Diameter 0.87"
Fitment notes — DORMAN 614002
Joint Diameter 3.3"Shaft End Inside Diameter 0.87"
InnerJoint Diameter 3.3"
View on
Amazon
MOOG Fits: all 1981 Accord engines CV4402
🇺🇸 US 🇨🇦 CA
Inner
View on
Amazon
MOOG Fits: 1.8L L4 4451
🇺🇸 US 🇨🇦 CA
Front Left OuterW2- Front Right Outer
View on
Amazon
MOOG Fits: 1.8L L4 4402
🇺🇸 US 🇨🇦 CA
Front Left InnerW4- Front Right Inner
View on
Amazon
PRO LINE Fits: 1.8L L4 4261030
🇺🇸 US 🇨🇦 CA
Outer
View on
Amazon

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.

Differential Carrier Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular Fits: 1.8L L4 RB6207
🇺🇸 US 🇨🇦 CA
Automatic trans.Honda trans.
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 1.8L L4 RB6208
🇺🇸 US 🇨🇦 CA
Manual trans.Honda trans.
View on
Amazon
ULTRA-POWER Fits: 1.8L L4 RB6305
🇺🇸 US 🇨🇦 CA
Automatic Transmission BearingCountershaft
Fitment notes — ULTRA-POWER RB6305
Automatic Transmission BearingCountershaft3 Speed TransHonda TransAK Trans
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
TIMKEN Popular Fits: 1.8L L4 207
🇺🇸 US 🇨🇦 CA
0.6693 in. Width
Fitment notes — TIMKEN 207
0.6693 in. Width
Automatic trans.
View on
Amazon
BCA Fits: 1.8L L4 WE61445
🇺🇸 US 🇨🇦 CA
Manual trans.Automatic Trans.
View on
Amazon
BCA Fits: 1.8L L4 NB208
🇺🇸 US 🇨🇦 CA
Manual trans.Honda trans.
View on
Amazon
NATIONAL Fits: 1.8L L4 207
🇺🇸 US 🇨🇦 CA
Automatic trans.Honda trans.
View on
Amazon
NATIONAL Fits: 1.8L L4 208
🇺🇸 US 🇨🇦 CA
Manual trans.Honda trans.
View on
Amazon
SCHAEFFLER Fits: 1.8L L4 6207
🇺🇸 US 🇨🇦 CA
Bearing & Race Set
Fitment notes — SCHAEFFLER 6207
Bearing & Race Set
Manual trans.with 1.378 In Shaft17 MM Width72 mm Outside Diameter35 mm Inside Diameter
View on
Amazon
SKF Fits: 1.8L L4 6207J
🇺🇸 US 🇨🇦 CA
Manual trans.
View on
Amazon
TIMKEN Fits: 1.8L L4 208
🇺🇸 US 🇨🇦 CA
0.7087 in. Width
Fitment notes — TIMKEN 208
0.7087 in. Width
Manual trans.
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Buying Drivetrain Parts for a 1981 Honda Accord

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Differential Carrier Bearing / Race and CV Joint Boot .

Frequently Asked Questions

How many drivetrain parts fit the 1981 Honda Accord?

Our catalog currently lists 24 drivetrain parts for the 1981 Honda Accord across 3 subcategories and 14 brands, covering both the 1.6L L4 and the 1.8L L4. Each part is matched to the engine(s) it fits.

Do drivetrain parts differ between 1981 Honda Accord engines?

Some do. 2 parts fit every engine; the other 22 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of drivetrain problems on a 1981 Honda Accord?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1981 Honda Accord was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1981 Honda Accord?

First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1981 Honda Accord

Drivetrain Parts for Other Honda Accord Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.