1982 Honda Prelude Electrical Connector Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

4 Electrical connector parts are listed for the 1982 Honda Prelude, in 4 part types, covering both the 1.6L L4 and the 1.8L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1982 Honda Prelude, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules. Most of the listed parts are A/C Compressor Clutch Coil Connector (1 part), A/C Refrigerant Pressure Switch Connector (1 part) and HVAC Control Switch / Panel Connector (1 part). The other 1 part type covers the remaining 1 part.

A/C Compressor Clutch Coil Connector

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.8L L4 85109
🇺🇸 US 🇨🇦 CA
2-Wire Nippondenso Speed Sensor
Fitment notes — DORMAN 85109
2-Wire Nippondenso Speed Sensor
2 Wire HarnessNippondenso
View on
Amazon

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

A/C Refrigerant Pressure Switch Connector

Brand Part Number Markets Notes Buy
FOUR SEASONS Fits: 1.8L L4 37219
🇺🇸 US 🇨🇦 CA
2 Terminal FemaleCut-Off
View on
Amazon

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

HVAC Control Switch / Panel Connector

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.8L L4 85141
🇺🇸 US 🇨🇦 CA
2-Wire Cycle/Chrysler Pressure
Fitment notes — DORMAN 85141
2-Wire Cycle/Chrysler Pressure
Switch - Air Conditioning Pressure (Filter/Dryer Mount, Spade Type)
View on
Amazon

This table covers the harness connectors at the HVAC Control Switch / Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Temperature Sender / Sensor Connector

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.8L L4 S3284
🇺🇸 US 🇨🇦 CA
with GaugeSending Unit Switch Connector
View on
Amazon

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Buying Electrical Connector Parts for a 1982 Honda Prelude

On this vehicle, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules.

  • Match the engine first. Every electrical connector part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: A/C Compressor Clutch Coil Connector and A/C Refrigerant Pressure Switch Connector .

Frequently Asked Questions

How many electrical connector parts fit the 1982 Honda Prelude?

Our catalog currently lists 4 electrical connector parts for the 1982 Honda Prelude across 4 subcategories and 3 brands, covering both the 1.6L L4 and the 1.8L L4. Each part is matched to the engine(s) it fits.

Do electrical connector parts differ between 1982 Honda Prelude engines?

Yes. Every electrical connector part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of electrical connector problems on a 1982 Honda Prelude?

Common symptoms include intermittent faults that move when the harness is wiggled, green corrosion inside a plug, or melted connector housings near heat sources. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1982 Honda Prelude was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1982 Honda Prelude?

First match the engine — each row shows which engine(s) the part fits. Then match the connector by terminal count and keyway, not just appearance — many families look identical but will not lock. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1982 Honda Prelude

Electrical Connector Parts for Other Honda Prelude Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.