1983 Honda Civic Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Camshaft Seal parts are listed for the 1983 Honda Civic, from ELRING, NATIONAL, WJB / INMOTION PARTS and 3 other brands. NATIONAL 320595 carries the "Popular" badge.

Listed part numbers: NATIONAL 320595, WJB / INMOTION PARTS WS320595 and BCA NS320595, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 1983 Honda Civic come from 3 brands — ITM ENGINE COMPONENTS, MAHLE / CLEVITE and TOPLINE.

Listed part numbers: ITM ENGINE COMPONENTS 4B1951, MAHLE / CLEVITE CB1223P and TOPLINE RBH12.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 1983 Honda Civic come from 4 brands — AJUSA, APEX, BECK/ARNLEY and 1 other brand.

Listed part numbers: AJUSA 54035800, APEX ACS1001 and BECK/ARNLEY 0330575, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts are listed for the 1983 Honda Civic, from TOPLINE and ITM ENGINE COMPONENTS.

This group includes ITM ENGINE COMPONENTS 5M9502, TOPLINE TWH12 and TOPLINE MBH20.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 1983 Honda Civic, from BCA, NATIONAL, SCHAEFFLER and 2 other brands. BCA NS99315 carries the "Popular" badge.

Listed part numbers: BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3466, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts are listed for the 1983 Honda Civic, from NATIONAL, BCA, SCHAEFFLER and 5 other brands. NATIONAL 710332 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 1983 Honda Civic come from 5 brands — APEX, AJUSA, ELRING and 2 other brands. The "Popular" part is APEX AHG110.

Part numbers include APEX AHG110, AJUSA 10017700 and ELRING 526895, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts for the 1983 Honda Civic come from 4 brands — APEX, ITM ENGINE COMPONENTS, TOPLINE and 1 other brand.

This group includes APEX AHS1001, ITM ENGINE COMPONENTS 0910919 and TOPLINE HSH11L and the remaining parts above.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1983 Honda Civic come from MELLING.

Part numbers include MELLING CSL605A and MELLING CSL705A.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 1983 Honda Civic come from 4 brands — AJUSA, APEX, ITM ENGINE COMPONENTS and 1 other brand.

This group includes AJUSA 50165600, APEX AFS1001 and ITM ENGINE COMPONENTS 0900915 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1983 Honda Civic — TOPLINE EVH12.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

7 Expansion Plug parts for the 1983 Honda Civic come from 4 brands — PIONEER, QUALCAST, DORMAN and 1 other brand. The "Popular" part is DORMAN 116203.

Part numbers include DORMAN 116203, MELLING MPE153BR and PIONEER PE153, among others listed above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Intake & Exhaust Manifold Gasket Set parts for the 1983 Honda Civic come from 2 brands — AJUSA and APEX.

Listed part numbers: AJUSA 13064800 and APEX AMS1010.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 715237700.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1983 Honda Civic — MELLING V5109.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts are listed for the 1983 Honda Civic, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. DEA / MARMON RIDE CONTROL A2450 carries the "Popular" badge.

This group includes DEA / MARMON RIDE CONTROL A2450, ANCHOR 8012 and ANCHOR 8022 and the remaining parts above.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1983 Honda Civic come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 1983 Honda Civic, from DORMAN, ELRING and AGS. DORMAN 090040 carries the "Popular" badge.

The Piggyback section lists 1 option from DORMAN — grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. DORMAN 65229 is listed in this group.

The Universal section lists 1 option from DORMAN — grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. DORMAN 65102 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes DORMAN 090040, DORMAN 65229 and DORMAN 65102 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 1983 Honda Civic come from 3 brands — AJUSA, DORMAN and ELRING.

Listed part numbers: AJUSA 22009300, DORMAN 095023 and ELRING 243600.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 1983 Honda Civic — MOTORAD MO106.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts are listed for the 1983 Honda Civic, from VARIOUS MFR, CHAMP / LUBER-FINER, FAMOUS BRAND and 8 other brands. VARIOUS MFR PG4651 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, FAMOUS BRAND, VARIOUS MFR and 6 other brands supply 11 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4651.

The Standard Replacement section lists 4 options from VARIOUS MFR, WIX, FRAM and 1 other brand — built to original-equipment specification. VARIOUS MFR PG4651EX is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 1983 Honda Civic, from AJUSA, APEX and ELRING.

Listed part numbers: AJUSA 14029600, APEX AOP101 and ELRING 705110.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts for the 1983 Honda Civic come from 4 brands — SEALED POWER, HASTINGS MANUFACTURING, MAHLE / CLEVITE and 1 other brand. The "Popular" part is SEALED POWER E438KC.

In the Premium grade, SEALED POWER and MAHLE / CLEVITE supply 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SEALED POWER E438KC.

Standard Replacement: 4 parts, from HASTINGS MANUFACTURING, SEALED POWER and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C6173.

This group includes SEALED POWER E438KC, MAHLE / CLEVITE 41530 and HASTINGS MANUFACTURING 2C6173 and the remaining parts above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

3 Timing Belt parts for the 1983 Honda Civic come from 3 brands — ACDELCO, BANDO and S.A. GEAR.

Part numbers include ACDELCO TB041, among others listed above.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

BECK/ARNLEY supplies both parts for the 1983 Honda Civic.

This group includes BECK/ARNLEY 0513860 and BECK/ARNLEY 0513954.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Belt Tensioner parts are listed for the 1983 Honda Civic, from CLOYES, FVP, INA and 1 other brand.

Listed part numbers: CLOYES 95019 and INA ZT95019, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

APEX supplies both parts for the 1983 Honda Civic.

This group includes APEX ATC1010 and APEX ATC1011.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 1983 Honda Civic — SKF 99138.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1983 Honda Civic — SKF 13946.

This table covers the Torque Strut bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Torque Strut Bushing parts are listed for the 1983 Honda Civic, from DEA / MARMON RIDE CONTROL and PIONEER.

Listed part numbers: DEA / MARMON RIDE CONTROL A6535, DEA / MARMON RIDE CONTROL A6536 and PIONEER 632817, plus the other parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 1983 Honda Civic come from 2 brands — ANCHOR and PIONEER.

This group includes ANCHOR 8525 and PIONEER 658525.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 1983 Honda Civic, from FEL-PRO, APEX, BECK/ARNLEY and 1 other brand. FEL-PRO VS50217R1 carries the "Popular" badge.

This group includes FEL-PRO VS50217R1, APEX AVC101S and BECK/ARNLEY 0361266 and the remaining parts above.

This table covers the Valve Cover grommets. Read more

4 Valve Cover Grommet parts are listed for the 1983 Honda Civic, from APEX, FEL-PRO, JAPANESE OE and 1 other brand.

Listed part numbers: APEX AES100, FEL-PRO ES70337 and JAPANESE OE KF81126, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

5 Valve Guide parts are listed for the 1983 Honda Civic, from QUALCAST, ITM ENGINE COMPONENTS and SBI. QUALCAST 307830 carries the "Popular" badge.

Listed part numbers: QUALCAST 307830, ITM ENGINE COMPONENTS VG973CI and ITM ENGINE COMPONENTS VG973BR, plus the other parts above.

This table covers the Valve seats. Read more

6 Valve Seat parts for the 1983 Honda Civic come from 4 brands — QUALCAST, PIONEER, DURA-BOND and 1 other brand. The "Popular" part is DURA-BOND 31054.

This group includes DURA-BOND 31054, QUALCAST 21125052 and PIONEER 38510 and the remaining parts above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: PIONEER PF234.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts are listed for the 1983 Honda Civic, from AJUSA, APEX, SBI and 2 other brands. APEX AVS1001 carries the "Popular" badge.

Part numbers include APEX AVS1001, SBI 1221136 and AJUSA 12004000, among others listed above.