This page lists 60 drivetrain parts for the 1985 Honda Civic, across 13 part types, covering both the 1.3L L4 and the 1.5L L4. Every part shows its brand, manufacturer part number and fitment notes.
The drivetrain system on the 1985 Honda Civic moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. The largest groups are CV Axle (14 parts), Differential Carrier Bearing / Race (10 parts) and Differential Pinion Bearing / Race (8 parts). The other 10 part types cover the remaining 28 parts.
The 1985 Honda Civic was sold with both the 1.3L L4 and the 1.5L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1985 Honda Civic drivetrain parts are SKF (14 parts), SCHAEFFLER (12 parts) and TIMKEN (7 parts), plus 16 more brands. Quality grades include Standard Replacement and Economy.
10 parts on this 1985 Honda Civic page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including HERI 91677 (CV Axle) and DORMAN 614001 (CV Joint Boot). Click any part number to see every vehicle that part fits.
Axle Intermediate Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 1.3L L4 | SS2645 | 🇺🇸 US | Outer4WD | View on Amazon |
This table covers the seals at the Axle Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 1985 Honda Civic — SCHAEFFLER SS2645.
Axle Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 1.3L L4 | 60082RSR | 🇺🇸 US 🇨🇦 CA | Front15 MM Width | View on Amazon |
| SKF Fits: 1.3L L4 | 60082RSJ | 🇺🇸 US | Front4WD | View on Amazon |
This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Axle Shaft Bearing parts are listed for the 1985 Honda Civic, from SCHAEFFLER and SKF.
This group includes SCHAEFFLER 60082RSR and SKF 60082RSJ.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 1.3L L4 | SS2062 | 🇺🇸 US 🇨🇦 CA | Fits Front Inner2.05" I:D X 2.68" O.D. X 0.31" Width | View on Amazon |
| SKF Fits: 1.3L L4 | 20455 | 🇺🇸 US | Front Inner4WD | View on Amazon |
| SKF Fits: 1.3L L4 | 15841 | 🇺🇸 US | Front Outer4WD | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Axle Shaft Seal parts for the 1985 Honda Civic come from 2 brands — SKF and SCHAEFFLER.
Listed part numbers: SCHAEFFLER SS2062, SKF 20455 and SKF 15841.
CV Axle
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HERI Popular Fits: 1.3L L4 | 91677 | 🇺🇸 US | Front LeftFWD | View on Amazon |
| AUTO EXTRA Fits: 1.3L L4 | HO88538 | 🇺🇸 US 🇨🇦 CA | Front Left2WD | View on Amazon |
| CARDONE Fits: 1.3L L4 | 604004 | 🇺🇸 US | Remanufactured | View on Amazon |
| CARDONE Fits: 1.3L L4 | 604005 | 🇺🇸 US | Remanufactured | View on Amazon |
| CARDONE Fits: 1.3L L4 | 604054 | 🇺🇸 US | Remanufactured | View on Amazon |
| FAMOUS BRAND Fits: 1.3L L4 | NCV36017 | 🇺🇸 US 🇨🇦 CA | LeftFront | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRAKMOTIVE Popular Fits: 1.3L L4 | HO8073 | 🇺🇸 US | Does Not Include ABS Ring | View on Amazon |
| TRAKMOTIVE Popular Fits: 1.3L L4 | HO8074 | 🇺🇸 US | Does Not Include ABS Ring | View on Amazon |
| CARDONE Fits: 1.3L L4 | 664054 | 🇺🇸 US | Front Left4WD | View on Amazon |
| GSP Fits: 1.3L L4 | NCV36018 | 🇺🇸 US | Front RightFWD | View on Amazon |
| GSP Fits: 1.3L L4 | NCV36017 | 🇺🇸 US | Front LeftFWD | View on Amazon |
| TOP NOTCH Fits: 1.3L L4 | TN50118 | 🇺🇸 US | Front RightFWD | View on Amazon |
| TRAKMOTIVE Fits: 1.3L L4 | HO8028 | 🇺🇸 US | Does Not Include ABS Ring | View on Amazon |
| TRAKMOTIVE Fits: 1.3L L4 | HO8019 | 🇺🇸 US | Does Not Include ABS Ring | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
14 CV Axle parts for the 1985 Honda Civic come from 7 brands — CARDONE, TRAKMOTIVE, GSP and 4 other brands. The "Popular" part is HERI 91677.
The Economy section lists 6 options from CARDONE, HERI, AUTO EXTRA and 1 other brand — the catalog's value-priced group. HERI 91677 is listed in this group.
In the Standard Replacement grade, TRAKMOTIVE, GSP, CARDONE and 1 other brand supply 8 parts: built to original-equipment specification. A representative part number is TRAKMOTIVE HO8073.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 1.3L L4 | 614001 | 🇺🇸 US 🇨🇦 CA | Joint Diameter 3.58"Shaft End Inside Diameter .93" | View on Amazon |
| DORMAN Popular Fits: 1.3L L4 | 03680 | 🇺🇸 US 🇨🇦 CA | Front OuterJoint Diameter 3.83" | View on Amazon |
| DORMAN Fits: 1.3L L4 | 614002 | 🇺🇸 US 🇨🇦 CA | Joint Diameter 3.3"Shaft End Inside Diameter 0.87" | View on Amazon |
| MEVOTECH Fits: 1.3L L4 | DX623 | 🇺🇸 US 🇨🇦 CA | Front Right OuterFrom Serial # - ES005661 | View on Amazon |
| MEVOTECH Fits: 1.3L L4 | DX668 | 🇺🇸 US 🇨🇦 CA | Front Left OuterFWD | View on Amazon |
| MOOG Fits: 1.3L L4 | 4451 | 🇺🇸 US 🇨🇦 CA | Exc. 4WD WagonRear Left Outer | View on Amazon |
| PRO LINE Fits: 1.3L L4 | 4261030 | 🇺🇸 US 🇨🇦 CA | Fits OuterRIGHT | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
7 CV Joint Boot parts for the 1985 Honda Civic come from 4 brands — DORMAN, MEVOTECH, MOOG and 1 other brand. The "Popular" part is DORMAN 614001.
Listed part numbers: DORMAN 614001, DORMAN 03680 and DORMAN 614002, plus the other parts above.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 1.3L L4 | RB6207 | 🇺🇸 US 🇨🇦 CA | Fits Automatic trans.Honda trans.or Manual trans. | View on Amazon |
| ULTRA-POWER Fits: 1.3L L4 | RB6305 | 🇺🇸 US 🇨🇦 CA | Automatic Transmission BearingCountershaft | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Popular Fits: 1.3L L4 | 207 | 🇺🇸 US 🇨🇦 CA | 0.6693 in. Width | View on Amazon |
| BCA Fits: 1.3L L4 | WE61445 | 🇺🇸 US 🇨🇦 CA | Fits Automatic trans.or Manual trans.5 speed trans. | View on Amazon |
| NATIONAL Fits: 1.3L L4 | 207 | 🇺🇸 US 🇨🇦 CA | Fits Automatic trans.Honda trans.or Manual trans. | View on Amazon |
| SCHAEFFLER Fits: 1.3L L4 | 6207 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| SCHAEFFLER Fits: 1.3L L4 | 6208C3 | 🇺🇸 US | Bearing & Race Set | View on Amazon |
| SKF Fits: 1.3L L4 | 6207J | 🇺🇸 US 🇨🇦 CA | Fits Manual trans.FWD | View on Amazon |
| SKF Fits: 1.3L L4 | 6208J | 🇺🇸 US | Fits Rear4WD | View on Amazon |
| TIMKEN Fits: 1.3L L4 | 208 | 🇺🇸 US | 0.7087 in. Width | View on Amazon |
This table covers the bearings and races that support the differential carrier.
10 Differential Carrier Bearing / Race parts for the 1985 Honda Civic come from 7 brands — TIMKEN, SCHAEFFLER, SKF and 4 other brands. The "Popular" part is WJB / INMOTION PARTS RB6207.
The Economy section: 2 options from WJB / INMOTION PARTS and ULTRA-POWER. WJB / INMOTION PARTS RB6207 is listed in this group.
Standard Replacement: 8 parts, from TIMKEN, SCHAEFFLER, SKF and 2 other brands. A representative part number is TIMKEN 207.
Differential Pinion Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Popular Fits: 1.3L L4 | 32008X | 🇺🇸 US | Rear Outer4WD | View on Amazon |
| SKF Popular Fits: 1.3L L4 | 32008XVP | 🇺🇸 US | Rear Outer4WD | View on Amazon |
| BECK/ARNLEY Fits: 1.3L L4 | 0513879 | 🇺🇸 US | ID 1.575OD 2.677 | View on Amazon |
| SCHAEFFLER Fits: 1.3L L4 | 32008XA | 🇺🇸 US | Bearing & Race Set | View on Amazon |
| SCHAEFFLER Fits: 1.3L L4 | 32306A | 🇺🇸 US | Rear Inner4WD | View on Amazon |
| SKF Fits: 1.3L L4 | BR32306 | 🇺🇸 US | Rear Inner4WD | View on Amazon |
| TIMKEN Fits: 1.3L L4 | 32008X | 🇺🇸 US | Rear Inner4WD | View on Amazon |
| TIMKEN Fits: 1.3L L4 | 32306 | 🇺🇸 US | 1.1811 Cone Bore1.063 Cone Width | View on Amazon |
This table covers the bearings and races on the differential pinion.
8 Differential Pinion Bearing / Race parts are listed for the 1985 Honda Civic, from SKF, SCHAEFFLER, TIMKEN and 1 other brand. SKF 32008X carries the "Popular" badge.
Listed part numbers: SKF 32008X, SKF 32008XVP and BECK/ARNLEY 0513879, plus the other parts above.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 1.3L L4 | SR3476 | 🇺🇸 US | RearWagon | View on Amazon |
| TIMKEN Fits: 1.3L L4 | KWK99147 | 🇺🇸 US | Kwik-Sleeve | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
2 Differential Pinion Repair Sleeve parts for the 1985 Honda Civic come from 2 brands — SCHAEFFLER and TIMKEN.
Listed part numbers: SCHAEFFLER SR3476 and TIMKEN KWK99147.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 1.3L L4 | SS2522 | 🇺🇸 US | RearWagon | View on Amazon |
| SKF Fits: 1.3L L4 | 14739 | 🇺🇸 US | Rear4WD | View on Amazon |
| TIMKEN Fits: 1.3L L4 | 223843 | 🇺🇸 US | Rear4WD | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Differential Pinion Seal parts for the 1985 Honda Civic come from 3 brands — SCHAEFFLER, SKF and TIMKEN.
Listed part numbers: SCHAEFFLER SS2522, SKF 14739 and TIMKEN 223843.
Differential Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 1.3L L4 | 99146 | 🇺🇸 US | Rear4WD | View on Amazon |
This table covers the wear sleeves used to restore a Differential seal surface.
One part is listed for the 1985 Honda Civic — SKF 99146.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 1.3L L4 | SS5645 | 🇺🇸 US | Rear4WD | View on Amazon |
| SKF Fits: 1.3L L4 | 14020 | 🇺🇸 US | Rear4WD | View on Amazon |
| TIMKEN Fits: 1.3L L4 | 710197 | 🇺🇸 US | Rear4WD | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Differential Seal parts are listed for the 1985 Honda Civic, from SCHAEFFLER, SKF and TIMKEN.
This group includes SCHAEFFLER SS5645, SKF 14020 and TIMKEN 710197.
Transfer Case Output Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Popular Fits: 1.3L L4 | BR32 | 🇺🇸 US | Rear4WD | View on Amazon |
| MEVOTECH Fits: 1.3L L4 | H207 | 🇺🇸 US 🇨🇦 CA | FrontManual trans. | View on Amazon |
| SCHAEFFLER Fits: 1.3L L4 | 32007X | 🇺🇸 US | Bearing & Race Set | View on Amazon |
| SCHAEFFLER Fits: 1.3L L4 | KT32 | 🇺🇸 US | Bearing and Race Set | View on Amazon |
| SKF Fits: 1.3L L4 | BR32007 | 🇺🇸 US | Front4WD | View on Amazon |
This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Transfer Case Output Shaft Bearing parts are listed for the 1985 Honda Civic, from SKF, SCHAEFFLER and MEVOTECH. SKF BR32 carries the "Popular" badge.
Listed part numbers: SKF BR32, MEVOTECH H207 and SCHAEFFLER 32007X, plus the other parts above.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 1.3L L4 | 14756 | 🇺🇸 US | 4WDWagon | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: SKF 14756.
Buying Drivetrain Parts for a 1985 Honda Civic
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: CV Axle and Differential Carrier Bearing / Race .
Frequently Asked Questions
How many drivetrain parts fit the 1985 Honda Civic?
Our catalog currently lists 60 drivetrain parts for the 1985 Honda Civic across 13 subcategories and 19 brands, covering both the 1.3L L4 and the 1.5L L4. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 1985 Honda Civic engines?
Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 1985 Honda Civic?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1985 Honda Civic was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1985 Honda Civic?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1985 Honda Civic
Drivetrain Parts for Other Honda Civic Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.