1989 Honda Civic Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: AJUSA 93103200.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Camshaft Seal parts are listed for the 1989 Honda Civic, from FEL-PRO, MAHLE / CLEVITE, APEX and 9 other brands. CONTINENTAL CS11429 carries the "Popular" badge. 14 parts fit every engine; the other 2 are engine-specific.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

16 Connecting Rod Bearing parts for the 1989 Honda Civic come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands. The "Popular" part is ENGINETECH BB2205. 2 parts fit every engine; the other 14 are engine-specific.

The High Performance section lists 4 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4046XPC is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands supply 12 parts: built to original-equipment specification. A representative part number is ENGINETECH BB2205.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 1989 Honda Civic — ARP 2086001.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 1989 Honda Civic come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH HO15CSA. Every part fits both the 1.5L L4 and the 1.6L L4.

Part numbers include ENGINETECH HO15CSA, AJUSA 54060100 and APEX ACS1003, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 1989 Honda Civic come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH 852700 and TOPLINE CSH21L.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

17 Crankshaft Main Bearing parts are listed for the 1989 Honda Civic, from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. KING ENGINE BEARINGS MB5568AM carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS MB5568XP.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. KING ENGINE BEARINGS MB5568AM is listed in this group.

7 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 1989 Honda Civic, from SCHAEFFLER, BCA, FEL-PRO and 4 other brands. BCA NS99315 carries the "Popular" badge. 2 parts fit every engine; the other 6 are engine-specific.

Part numbers include BCA NS99315, FEL-PRO 16275 and MAHLE / CLEVITE A354, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

24 Crankshaft Seal parts are listed for the 1989 Honda Civic, from FEL-PRO, APEX, SCHAEFFLER and 11 other brands. FEL-PRO BS40430 carries the "Popular" badge. 20 parts fit every engine; the other 4 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 1989 Honda Civic come from 2 brands — ELRING and MAHLE / CLEVITE. Every part fits both the 1.5L L4 and the 1.6L L4.

This group includes ELRING 706120 and MAHLE / CLEVITE GS33750.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Cylinder Head Gasket parts for the 1989 Honda Civic come from 9 brands — ELRING, VICTOR REINZ, APEX and 6 other brands. The "Popular" part is APEX AHG103S. 13 parts fit every engine; the other 3 are engine-specific.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Cylinder Head Gasket Set parts for the 1989 Honda Civic come from 9 brands — VICTOR REINZ, ENGINETECH, FEL-PRO and 6 other brands. The "Popular" part is APEX AHS1003. 10 parts fit every engine; the other 3 are engine-specific.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302037.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1989 Honda Civic come from MELLING.

Listed part numbers: MELLING CSL616 and MELLING CSL716.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1989 Honda Civic — KAT'S HEATERS 11419.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts for the 1989 Honda Civic come from 6 brands — VICTOR REINZ, APEX, ENGINETECH and 3 other brands. The "Popular" part is APEX AFS1003. 5 parts fit every engine; the other 2 are engine-specific.

Part numbers include APEX AFS1003, ENGINETECH HO15K1 and AJUSA 50115800, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 1989 Honda Civic, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 2 other brands. ENGINETECH EM2491 carries the "Popular" badge. All of them fit every engine offered in the 1989 Civic.

This group includes ENGINETECH EM2491, ITM ENGINE COMPONENTS RX35036HP and QUALCAST 1010191 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Expansion Plug parts for the 1989 Honda Civic come from 2 brands — QUALCAST and MELLING. 2 parts fit every engine; the other 1 is engine-specific.

This group includes MELLING MPE259R, QUALCAST 97110B and QUALCAST 97110.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 1989 Honda Civic come from 7 brands — VICTOR REINZ, APEX, FEL-PRO and 4 other brands. The "Popular" part is APEX AMS1030. 7 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: APEX AMS1030, FEL-PRO MS941192 and AJUSA 13109500, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 1989 Honda Civic, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 2 other brands. ENGINETECH IM2452 carries the "Popular" badge. All of them fit every engine offered in the 1989 Civic.

Listed part numbers: ENGINETECH IM2452, ITM ENGINE COMPONENTS RV35035HP and QUALCAST 1010190, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

24 Motor Mount parts are listed for the 1989 Honda Civic, from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 3 other brands. SKP SKM8411 carries the "Popular" badge. 22 parts fit every engine; the other 2 are engine-specific.

In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SKM8411.

The Standard Replacement section: 22 options from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 8411 is listed in this group.

This table covers the Motor Mount inserts. Read more

This group shows a single part: ENERGY SUSPENSION 161104G.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 1989 Honda Civic. All of them fit every engine offered in the 1989 Civic.

This group includes ANCHOR 301171 and ANCHOR 301170.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

63 Oil parts are listed for the 1989 Honda Civic, from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and High Mileage (>75,000 Miles) alone accounts for 22 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1989 Honda Civic come from HAYDEN. Every part fits both the 1.5L L4 and the 1.6L L4.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

11 Oil Drain Plug parts are listed for the 1989 Honda Civic, from DORMAN, ELRING, AGS and 2 other brands. AGS ODP00007 carries the "Popular" badge. All of them fit every engine offered in the 1989 Civic.

The Piggyback section lists 1 option from DORMAN — grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. DORMAN 65229 is listed in this group.

The Twist Drain section lists 1 option from DORMAN — grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. DORMAN 092020 is listed in this group.

The Universal section lists 1 option from DORMAN — grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. DORMAN 65102 is listed in this group.

8 ungrouped parts are not assigned to a grade, with the same engine-level match.