1992 Honda Civic Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 1992 Honda Civic, from FEL-PRO, APEX, CONTINENTAL and 9 other brands. CONTINENTAL CS11429 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts for the 1992 Honda Civic come from 6 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 3 other brands. The "Popular" part is ENGINETECH BB2205.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4046XPC is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is ENGINETECH BB2205.

This group includes ENGINETECH BB2205, KING ENGINE BEARINGS CR4046XPC and KING ENGINE BEARINGS CR4046XPCX and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 1992 Honda Civic come from 7 brands — APEX, ENGINETECH, AJUSA and 4 other brands. The "Popular" part is APEX ACS1003.

Listed part numbers: APEX ACS1003, ENGINETECH HO15CSA and AJUSA 54060100, plus the other parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: TOPLINE CSH21L.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts are listed for the 1992 Honda Civic, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 3 other brands. ENGINETECH BC2206 carries the "Popular" badge.

Part numbers include ENGINETECH BC2206, MAHLE / CLEVITE MS1806AL and ITM ENGINE COMPONENTS 5M9304, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 1992 Honda Civic, from SCHAEFFLER, BCA, FEL-PRO and 3 other brands. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3466, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

28 Crankshaft Seal parts are listed for the 1992 Honda Civic, from FEL-PRO, APEX, VICTOR REINZ and 12 other brands. FEL-PRO TCS45989 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV1171.

This table covers the cylinder heads that close the top of the block. Read more

One part is listed for the 1992 Honda Civic — TOPLINE CHVH21HF.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 1992 Honda Civic come from 4 brands — ELRING, ENGINETECH, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: ELRING 706120, ENGINETECH HB240 and MAHLE / CLEVITE GS33750, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

20 Cylinder Head Gasket parts for the 1992 Honda Civic come from 9 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 6 other brands. The "Popular" part is FEL-PRO 9123PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

16 Cylinder Head Gasket Set parts for the 1992 Honda Civic come from 10 brands — ENGINETECH, APEX, FEL-PRO and 7 other brands. The "Popular" part is ENGINETECH HO15HSF.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302037.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1992 Honda Civic come from MELLING.

Part numbers include MELLING CSL616 and MELLING CSL716.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1992 Honda Civic — KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 1992 Honda Civic come from TECHPRO.

Listed part numbers: TECHPRO HO1228115 and TECHPRO HO1228143.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts for the 1992 Honda Civic come from 5 brands — APEX, ENGINETECH, TOPLINE and 2 other brands. The "Popular" part is ENGINETECH HO15K1.

Part numbers include ENGINETECH HO15K1, ENGINETECH HO15K2 and AJUSA 50115800, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 1992 Honda Civic, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 2 other brands. ENGINETECH EM2491 carries the "Popular" badge.

This group includes ENGINETECH EM2491, ITM ENGINE COMPONENTS RX35036HP and QUALCAST 1010191 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Expansion Plug parts for the 1992 Honda Civic come from 2 brands — QUALCAST and MELLING.

Listed part numbers: MELLING MPE259R, QUALCAST 97110B and QUALCAST 97110.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 1992 Honda Civic come from 4 brands — ATP, SKP, DORMAN and 1 other brand. The "Popular" part is SKP SK594217.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594217 is listed in this group.

Standard Replacement: 4 parts, from ATP, DORMAN and PIONEER. A representative part number is ATP 102176.

Part numbers include SKP SK594217, ATP 102176 and ATP 102197, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts for the 1992 Honda Civic come from 8 brands — APEX, FEL-PRO, VICTOR REINZ and 5 other brands. The "Popular" part is APEX AMS1030.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 1992 Honda Civic, from ITM ENGINE COMPONENTS, ENGINETECH, SBI and 2 other brands. ENGINETECH IM2452 carries the "Popular" badge.

Listed part numbers: ENGINETECH IM2452, SBI 10190 and ITM ENGINE COMPONENTS RV9523, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

24 Motor Mount parts are listed for the 1992 Honda Civic, from ANCHOR, WESTAR, SKP and 3 other brands. SKP SKM8435 carries the "Popular" badge.

Economy: 4 parts, from SKP. A representative part number is SKP SKM8435.

The Standard Replacement section: 20 options from ANCHOR, WESTAR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 8010 is listed in this group.

This table covers the Motor Mount inserts. Read more

This group shows a single part: ENERGY SUSPENSION 161105G.

This table covers the Motor Mount kits. Read more

SKP supplies both parts for the 1992 Honda Civic.

This group includes SKP SKM3026K and SKP SKM3092K.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

42 Oil parts are listed for the 1992 Honda Civic, from VALVOLINE, MOBIL, LIQUI MOLY and 1 other brand. LIQUI MOLY 20228 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 22 parts.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1992 Honda Civic come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.