1995 Honda Odyssey Engine Parts

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1995 Honda Odyssey — SKF 10584.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

13 Balance Shaft Belt parts are listed for the 1995 Honda Odyssey, from GATES, CLOYES, ITM ENGINE COMPONENTS and 9 other brands. CLOYES B186 carries the "Popular" badge.

In the Economy grade, CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is CLOYES B186.

In the High Performance grade, GATES supplies 1 part: engineered beyond original-equipment specification. A representative part number is GATES T186RB.

The Standard Replacement section lists 8 options from CONTINENTAL, GATES, ACDELCO and 5 other brands — built to original-equipment specification. CONTINENTAL 40186 is listed in this group.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

10 Balance Shaft Belt Tensioner parts for the 1995 Honda Odyssey come from 10 brands — CLOYES, GMB, BECK/ARNLEY and 7 other brands. The "Popular" part is CLOYES 95204.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

One part is listed for the 1995 Honda Odyssey — SCHAEFFLER SR3460.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts are listed for the 1995 Honda Odyssey, from SKF, BCA, CONTINENTAL and 2 other brands. SKF 10584 carries the "Popular" badge.

This group includes SKF 10584, BCA NS712009 and CONTINENTAL CS9021 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1995 Honda Odyssey — DURA-BOND HA3.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 1995 Honda Odyssey come from 3 brands — SCHAEFFLER, SKF and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR3461, SKF 99111 and WJB / INMOTION PARTS WS99111.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Camshaft Seal parts for the 1995 Honda Odyssey come from 14 brands — AUTO EXTRA, FEL-PRO, MAHLE / CLEVITE and 11 other brands. The "Popular" part is FEL-PRO TCS45898.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts are listed for the 1995 Honda Odyssey, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 3 other brands. ENGINETECH BB1520 carries the "Popular" badge.

High Performance: 3 parts, from MAHLE / CLEVITE and KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS CR4033XP.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 3 other brands. ENGINETECH BB1520 is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 1995 Honda Odyssey, from APEX, ENGINETECH, FEL-PRO and 3 other brands. APEX ACS1014 carries the "Popular" badge.

This group includes APEX ACS1014, ENGINETECH HO22CS and FEL-PRO CS9851 and the remaining parts above.

This table covers the Counter Balance Shaft Seal kits. Read more

One part is listed for the 1995 Honda Odyssey — DORMAN 917006.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts for the 1995 Honda Odyssey come from 6 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. The "Popular" part is ENGINETECH BC2200.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5168XP is listed in this group.

Standard Replacement: 7 parts, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 3 other brands. A representative part number is ENGINETECH BC2200.

This group includes ENGINETECH BC2200, KING ENGINE BEARINGS MB5168XP and MAHLE / CLEVITE MS2012P and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1995 Honda Odyssey come from 5 brands — SCHAEFFLER, BCA, FEL-PRO and 2 other brands. The "Popular" part is BCA NS99315.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts for the 1995 Honda Odyssey come from 13 brands — VICTOR REINZ, APEX, FEL-PRO and 10 other brands. The "Popular" part is APEX ABS100.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts are listed for the 1995 Honda Odyssey, from ITM ENGINE COMPONENTS, FEL-PRO, APEX and 5 other brands. FEL-PRO 9958PT1 carries the "Popular" badge.

Part numbers include FEL-PRO 9958PT1, ITM ENGINE COMPONENTS 0940933C and APEX AHG127, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 1995 Honda Odyssey, from ITM ENGINE COMPONENTS, FEL-PRO, SKP and 6 other brands. FEL-PRO HS9958PT carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 1995 Honda Odyssey, from ENGINETECH and SBI.

Part numbers include ENGINETECH CHS1041 and SBI 2302163.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 1995 Honda Odyssey.

Listed part numbers: MELLING CSL617 and MELLING CSL717.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 1995 Honda Odyssey, from ENGINETECH, APEX, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH HO22K3 carries the "Popular" badge.

Part numbers include ENGINETECH HO22K3, APEX AFS1027 and ITM ENGINE COMPONENTS 0900950, among others listed above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 1995 Honda Odyssey — ENGINETECH MKHO22EP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts for the 1995 Honda Odyssey come from 8 brands — QUALCAST, ENGINETECH, MELLING and 5 other brands. The "Popular" part is ENGINETECH EM2767.

This group includes ENGINETECH EM2767, MELLING V5198 and BECK/ARNLEY 0213323 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 1995 Honda Odyssey, from SKP, ATP, DAYCO and 2 other brands. SKP SK594067 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SK594067.

The Standard Replacement section: 4 options from ATP, DAYCO, DORMAN and 1 other brand. ATP 102095 is listed in this group.

Part numbers include SKP SK594067, ATP 102095 and DAYCO PB1188N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts are listed for the 1995 Honda Odyssey, from BECK/ARNLEY, FEL-PRO, MAHLE / CLEVITE and 3 other brands. FEL-PRO MS95612 carries the "Popular" badge.

Part numbers include FEL-PRO MS95612, MAHLE / CLEVITE MS16164 and APEX AMS1270, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts for the 1995 Honda Odyssey come from 3 brands — APEX, BECK/ARNLEY and FEL-PRO.

Part numbers include APEX AMS1272, BECK/ARNLEY 0374799 and FEL-PRO MS95534.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 1995 Honda Odyssey come from 5 brands — MELLING, BECK/ARNLEY, ENGINETECH and 2 other brands. The "Popular" part is MELLING V5197.

This group includes MELLING V5197, BECK/ARNLEY 0213425 and ENGINETECH IM2760 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

24 Motor Mount parts for the 1995 Honda Odyssey come from 7 brands — SKP, DEA / MARMON RIDE CONTROL, ANCHOR and 4 other brands. The "Popular" part is SKP SKM8026.

The Economy section: 5 options from SKP and FAMOUS BRAND. SKP SKM8026 is listed in this group.

Standard Replacement: 19 parts, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 2 other brands. A representative part number is DEA / MARMON RIDE CONTROL A6549.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 1995 Honda Odyssey come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and SKP.

Listed part numbers: ANCHOR 300339, ANCHOR 300338 and DEA / MARMON RIDE CONTROL MK5500, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

63 Oil parts for the 1995 Honda Odyssey come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 37 parts.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1995 Honda Odyssey.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 1995 Honda Odyssey come from DORMAN.

Part numbers include DORMAN 921079 and DORMAN 921078.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 1995 Honda Odyssey come from 6 brands — DORMAN, ELRING, AGS and 3 other brands. The "Popular" part is AGS ODP00007.

Part numbers include AGS ODP00007, DORMAN 090053 and BECK/ARNLEY 0160088, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 1995 Honda Odyssey, from DORMAN, APEX, ELRING and 2 other brands. DORMAN 095144 carries the "Popular" badge.

Listed part numbers: DORMAN 095144, APEX ADP1909 and ELRING 243600, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 1995 Honda Odyssey come from 5 brands — MOTORAD, BECK/ARNLEY, CALORSTAT and 2 other brands. The "Popular" part is MOTORAD MO81.

Part numbers include MOTORAD MO81, BECK/ARNLEY 0160125 and CALORSTAT OC2315, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 1995 Honda Odyssey come from 16 brands — BOSCH, WIX, FRAM and 13 other brands. The "Popular" part is WIX 51334XP.

The Economy section: 5 options from BOSCH, FRAM, FVP and 2 other brands. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 11 parts, from BOSCH, DENSO, WIX and 8 other brands. A representative part number is BOSCH 3323.

This table covers the oil pans that hold the engine's oil sump. Read more

8 Oil Pan parts are listed for the 1995 Honda Odyssey, from AUTOTECNICA, SKP, ACKOJA and 5 other brands. AUTOTECNICA HA149595 carries the "Popular" badge.

This group includes AUTOTECNICA HA149595, SKP SK264403 and ACKOJA A260136 and the remaining parts above.